3-(Dimethylamino)-4-methylphenol
-
3-(Dimethylamino)-4-methylphenol
structure -
-
CAS No:
119-31-3
-
Formula:
C9H13NO
-
Chemical Name:
3-(Dimethylamino)-4-methylphenol
-
Synonyms:
Phenol,3-(dimethylamino)-4-methyl-;p-Cresol,3-(dimethylamino)-;3-(Dimethylamino)-4-methylphenol;3-(Dimethylamino)-p-cresol;2-Dimethylamino-4-hydroxytoluene;3-Dimethylamino-4-methylphenol;NSC 7199
-
CAS No:
Description
3-DIMETHYLAMINO-4-METHYLPHENOL is a red liquid with phenolic odor.
3-dimethylamino-4-methylphenol is a red liquid with phenolic odor.
3-dimethylamino-4-methylphenol is a red liquid with phenolic odor.
Characteristics
23.47000
1.76660
3-dimethylamino-4-methylphenol is a red liquid with phenolic odor.
1.063g/cm3
72-72.5 °C
261.6ºC at 760mmHg
126.2ºC
1.579
Moderately soluble in water.
Amines, Phosphines, and Pyridines
Phenols, such as 3-DIMETHYLAMINO-4-METHYLPHENOL, do not behave as organic alcohols, as one might guess from the presence of a hydroxyl (-OH) group in their structure. Instead, they react as weak organic acids. Phenols and cresols are much weaker as acids than common carboxylic acids (phenol has pKa = 9.88). These materials are incompatible with strong reducing substances such as hydrides, nitrides, alkali metals, and sulfides. Flammable gas (H2) is often generated, and the heat of the reaction may ignite the gas. Heat is also generated by the acid-base reaction between phenols and bases. Such heating may initiate polymerization of the organic compound. Phenols are sulfonated very readily (for example, by concentrated sulfuric acid at room temperature). The reactions generate heat.
Safety Information
Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Computed Properties
Molecular Weight:151.21
XLogP3:2.1
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:151.099714038
Monoisotopic Mass:151.099714038
Topological Polar Surface Area:23.5
Heavy Atom Count:11
Complexity:125
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
3-(Dimethylamino)-4-methylphenol
SDSRequest for Quotation