Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 1,2,3,5-Tetramethylbenzene

1,2,3,5-Tetramethylbenzene

1,2,3,5-Tetramethylbenzene structure

1,2,3,5-Tetramethylbenzene 

structure
  • CAS No:

    527-53-7

  • Formula:

    C10H14

  • Chemical Name:

    1,2,3,5-Tetramethylbenzene

  • Synonyms:

    Benzene,1,2,3,5-tetramethyl-;1,2,3,5-Tetramethylbenzene;Isodurene;1,3,4,5-Tetramethylbenzene;NSC 8091

Description

clear colourless to pale yellow liquid


1,2,3,5-tetramethylbenzene appears as a pale yellow to white liquid with a camphor-like odor. Flash point 165°F. Less dense than water and only negligibly soluble in water. Slightly irritates the skin and eyes. Slightly toxic by ingestion but may irritate the mouth, throat and gastrointestinal tract.


1,2,3,5-tetramethylbenzene appears as a pale yellow to white liquid with a camphor-like odor. Flash point 165°F. Less dense than water and only negligibly soluble in water. Slightly irritates the skin and eyes. Slightly toxic by ingestion but may irritate the mouth, throat and gastrointestinal tract.

1,2,3,5-Tetramethylbenzene Basic Attributes

134.218

134.22

208-417-1

0JBI5Y5A5Z

8091

1993

DTXSID6026119

2902909090

Characteristics

0

4.06

1,2,3,5-tetramethylbenzene appears as a pale yellow to white liquid with a camphor-like odor. Flash point 165°F. Less dense than water and only negligibly soluble in water. Slightly irritates the skin and eyes. Slightly toxic by ingestion but may irritate the mouth, throat and gastrointestinal tract.

0.8906 g/cm3 @ Temp: 20 °C

-23.7 °C

198 °C

63.3±0.0 °C

1.501

(80°C) 14 mm

4.63 (USCG, 1999) (Relative to Air)

Insoluble in water.

Hydrocarbons, Aromatic

Vigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons, such as 1,2,3,5-TETRAMETHYLBENZENE, and strong oxidizing agents. They can react exothermically with bases and with diazo compounds. Substitution at the benzene nucleus occurs by halogenation (acid catalyst), nitration, sulfonation, and the Friedel-Crafts reaction.

Safety Information

3082

20/21/22-36/37/38

S26-S36/37/39-S24/25-S23

DC0475000

Xi

P264, P280, P302+P352, P305+P351+P338, P321, P332+P313, P337+P313, P362

H315

Combustible. (USCG, 1999)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective. SMALL FIRE: Dry chemical, CO2, water spray or regular foam. LARGE FIRE: Water spray, fog or regular foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Wear self contained breathing apparatus, rubber boots and heavy rubber gloves. (USCG, 1999)

Drug Information

3.00 Days

CALL FOR MEDICAL AID. LIQUID: Irritating to skin, eyes, and respiratory tract. Remove contaminated clothing and shoes. Flush affected areas with plenty of water. IF IN EYES, hold eyelids open and flush with plenty of water. VAPORS: Irritating to skin, eyes and respiratory tract. Move to fresh air. If breathing has stopped, give artificial respiration. If breathing is difficult, give oxygen. IF IN EYES, hold eyelids open and flush with plenty of water. Harmful if inhaled or swallowed. Vapor or mist is irritating to the eyes, mucous membranes, and upper respiratory tract. Prolonged contact can cause dermititis, and prolonged exposure can cause nausea, dizziness and headache. (USCG, 1999)

INHALATION: Call for medical aid. Remove the victim to fresh air. If breathing has stopped give artificial respiration. If breathing is difficult, give oxygen. EYES OR SKIN: Flush with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. (USCG, 1999)

isodurene

1,2,3,5-Tetramethylbenzene Use and Manufacturing

Uses

Organic synthesis.

Benzene, 1,2,3,5-tetramethyl-: ACTIVE

Computed Properties

Molecular Weight:134.22
XLogP3:4
Exact Mass:134.109550447
Monoisotopic Mass:134.109550447
Heavy Atom Count:10
Complexity:94.6
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 1,2,3,5-Tetramethylbenzene

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.