o-Anisidine, hydrochloride
-
o-Anisidine, hydrochloride
structure -
-
CAS No:
134-29-2
-
Formula:
C7H9NO.ClH
-
Chemical Name:
o-Anisidine, hydrochloride
-
Synonyms:
Benzenamine,2-methoxy-,hydrochloride (1:1);o-Anisidine,hydrochloride;Benzenamine,2-methoxy-,hydrochloride;C.I. 37115;Fast Red BB Base;2-Methoxyaniline hydrochloride;o-Methoxyaniline hydrochloride;2-Methoxybenzenamine hydrochloride
- Categories:
-
CAS No:
Description
PHYSICAL DESCRIPTION: Gray-black crystalline solid or light gray powder. May be carcinogenic.
O-anisidine hydrochloride appears as gray-black crystalline solid or light gray powder. May be carcinogenic.
O-anisidine hydrochloride appears as gray-black crystalline solid or light gray powder. May be carcinogenic.
Characteristics
35.25000
2.66060
O-anisidine hydrochloride appears as gray-black crystalline solid or light gray powder. May be carcinogenic.
228-230 °C
n20/D 1.371
10 to 50 mg/mL at 70° F (NTP, 1992)
0.0885mmHg at 25°C
Water soluble.
Ethers
O-ANISIDINE HYDROCHLORIDE reacts as an acid to neutralize bases. These neutralizations generate some heat. Usually does not react as either an oxidizing agent or reducing agent but such behavior is not impossible. May catalyze organic reactions.
Safety Information
R36/37/38
S26-S36/37/39
BZ6500000
T
P201, P202, P260, P261, P264, P270, P271, P280, P281, P301+P310, P302+P352, P304+P340, P305+P351+P338, P308+P313, P309+P311, P311, P312, P314, P321, P322, P330, P337+P313, P361, P363, P403+P233, P405, P501
H301
Flash point data for this chemical are not available; however, it is probably combustible. (NTP, 1992)
|Danger|H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]|P201, P202, P260, P261, P264, P270, P271, P280, P281, P301+P310, P302+P352, P304+P340, P305+P351+P338, P308+P313, P309+P311, P311, P312, P314, P321, P322, P330, P337+P313, P361, P363, P403+P233, P405, and P501|The GHS information provided by 1 company from 1 notification to the ECHA C&L Inventory.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should protect this material from exposure to light. It should be stored under an inert atmosphere and under refrigerated temperatures. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
Drug Information
SYMPTOMS: This compound may cause local irritating effects to the eyes, mucous membranes and skin. It may also cause allergic responses. ACUTE/CHRONIC HAZARDS: This compound may be irritating to the eyes, mucous membranes and skin. When heated to decomposition this compound emits very toxic fumes of NOx and hydrogen chloride. (NTP, 1992)|Carcinogens
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
2-anisidine
Computed Properties
Molecular Weight:159.61
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:159.0450916
Monoisotopic Mass:159.0450916
Topological Polar Surface Area:35.2
Heavy Atom Count:10
Complexity:85
Covalently-Bonded Unit Count:2
Compound Is Canonicalized:Yes
Recommended Suppliers of o-Anisidine, hydrochloride
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives
Learn More Other Chemicals
-
4H-1-Benzopyran-4-one, 2-[4-[3-(dibutylamino)propoxy]-3,5-dimethylbenzoyl]-, hydrochloride (1:1)
67652-33-9
-
Cyclopropanecarboxylic acid, 1-amino-2-ethenyl-, ethyl ester, hydrochloride (9CI)
681807-60-3
-
CYCLOPENTYL-(3,4,5-TRIMETHOXY-BENZYL)-AMINE HYDROCHLORIDE
1052525-88-8
-
2-Cyclopropylbenzenemethanamine hydrochloride Formula
118184-64-8
-
Des[4-(2-cycloproylMethoxy)] Betaxolol Hydrochloride Formula
464877-45-0
-
Ethanamine, 2-(decylthio)-, hydrochloride (1:1) Formula
36362-09-1
-
4,7-Dichloro-2-propylquinoline hydrochloride Structure
1204812-22-5
-
6,7-Dichloro-4-hydrazino-2-methylquinoline hydrochloride Structure
1170377-12-4
-
What is 2,8-Diazaspiro[4.5]decan-1-one, 2-[(4-bromophenyl)methyl]-, hydrochloride (1:1)
832710-56-2
-
What is 6,7-Dichloro-4-hydrazinoquinoline hydrochloride
1171843-02-9