Dibutylbis(dodecylthio)stannane
-
Dibutylbis(dodecylthio)stannane
structure -
-
CAS No:
1185-81-5
-
Formula:
C32H68S2Sn
-
Chemical Name:
Dibutylbis(dodecylthio)stannane
-
Synonyms:
Stannane,dibutylbis(dodecylthio)-;Tin,dibutylbis(dodecylthio)-;Dibutylbis(dodecylthio)stannane;Dibutyltin bis(lauryl mercaptide);Dibutylbis(dodecylthio)tin;Mellite 39;Dibutyltin bis(dodecyl mercaptide);Bis(dodecylthio)dibutyltin;Advastab TM 918;Mellite 139;Thermolite 20;Dibutyltin S,S′-bis(dodecyl mercaptide);Dibutyltin dilauryl mercaptide;Mark A;Dabco 120;UL 32;Fomrez UL 32;NSC 65503;T 20;Dabco T 120;T 120;Di(dodecylmercapto)dibutyl tin;39403-64-0;52434-36-3;74913-29-4;877610-76-9
- Categories:
-
CAS No:
Description
Brown solid.
Dibutyltin-bis(lauryl mercaptide) is a brown solid. (NTP, 1992)|Liquid
Dibutyltin-bis(lauryl mercaptide) is a brown solid. (NTP, 1992)
Dibutylbis(dodecylthio)stannane Basic Attributes
635.72
635.72
214-688-7
1NNA71YL0C
65503
2788
DTXSID2024959
2930909090
Characteristics
50.6
13.33700
Dibutyltin-bis(lauryl mercaptide) is a brown solid. (NTP, 1992)
1.045 g/cm3
-10 °C
145 °C
>204°C
1.4992
less than 1 mg/mL at 68° F (NTP, 1992)
0.00861mmHg at 25°C
This compound may be sensitive to air or heat. (NTP, 1992). Insoluble in water.
Sulfides, Inorganic
An organometallic. Strongly reactive with many other groups. Incompatible with acids and bases. Organometallics are good reducing agents and therefore incompatible with oxidizing agents. Often reactive with water to generate toxic or flammable gases.
Safety Information
2788
23/24/25
26-36/37/39
P201, P202, P260, P261, P264, P270, P272, P273, P280, P281, P301+P310, P302+P352, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P362, P363, P391, P405, P501
H301
This chemical is probably combustible. (NTP, 1992)
|Danger|H301 (21.11%): Toxic if swallowed [Danger Acute toxicity, oral]|P201, P202, P260, P261, P264, P270, P272, P273, P280, P281, P301+P310, P302+P352, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P362, P363, P391, P405, and P501|Aggregated GHS information provided by 376 companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this compound should be controlle using a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, you should dampen the solid spill material with alcohol, then transfer the dampened material to a suitable container. Use absorbent paper dampened with alcohol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminate area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. Protect from air for long term storage. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms associated with this compound include primary skin irritation, nausea, headache, muscular weakness and paralysis. ACUTE/CHRONIC HAZARDS: This compound can cause skin irritation on contact. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezéng, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: Some heavy metals are VERY TOXIC POISONS, especially if their salts are very soluble in water (e.g., lead, chromium, mercury, bismuth, osmium, and arsenic). IMMEDIATELY call a hospital or poison control center and locate activated charcoal, egg whites, or milk in case the medical advisor recommends administering one of them. Also locate Ipecac syrup or a glass of salt water in case the medical advisor recommends inducing vomiting. Usually, this is NOT RECOMMENDED outside of a physician's care. If advice from a physician is not readily available and the victim is conscious and not convulsing, give the victim a glass of activated charcoal slurry in water or, if this is not available, a glass of milk, or beaten egg whites and IMMEDIATELY transport victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, assure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Dibutylbis(dodecylthio)stannane Use and Manufacturing
Adhesives and sealant chemicals
Adhesives and sealants
1,000,000 - 10,000,000 lb
Adhesive manufacturing|Stannane, dibutylbis(dodecylthio)-: ACTIVE
Computed Properties
Molecular Weight:635.7
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:30
Exact Mass:636.378447
Monoisotopic Mass:636.378447
Topological Polar Surface Area:50.6
Heavy Atom Count:35
Complexity:352
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
Zinc acrylate
14643-87-9
-
Tetrasodium EDTA
64-02-8
-
As-Propylarsonic acid
107-34-6
-
((4S,5S)-(-)-O-[1-Benzyl-1-(5-methyl-2-phenyl-4,5-dihydrooxazol-4-yl)-2-phenylethyl]-dicyclohexylphosphinite)(1,5-COD)iridium(I) tetrakis(3,5-bis(trifluoromethyl)phenylborate, min. 97% (S,S)-[COD]Ir[c Formula
583844-38-6
-
Sodium dichloroisocyanurate Formula
2893-78-9
-
Dichlorotris(triphenylphosphine)ruthenium Formula
15529-49-4
-
(4-Bromophenyl)hydrazine Structure
589-21-9
-
DICHLOROTETRAKIS(2-(2-PYRIDINYL)PHENYL)I Structure
92220-65-0
-
What is (ETHYL BENZOATE)TRICARBONYLCHROMIUM
32874-26-3
-
What is Ceramic materials and wares, chemicals
66402-68-4