Cobaltocene
-
Cobaltocene
structure -
-
CAS No:
1277-43-6
-
Formula:
C10H10Co
-
Chemical Name:
Cobaltocene
-
Synonyms:
Cobaltocene;Cobalt,di-π-cyclopentadienyl-;Cobalt,dicyclopentadienyl-;Cobalt,bis(η5-2,4-cyclopentadien-1-yl)-;Dicyclopentadienylcobalt;Bis(cyclopentadienyl)cobalt;Bis(η-cyclopentadienyl)cobalt;Bis(cyclopentadienyl)cobalt(II);Bis(η5-cyclopentadienyl)cobalt;NSC 62690;78206-33-4
- Categories:
-
CAS No:
Description
dark violet crystalsA metallocene.Black-purple crystals or black solid. Sublimes at 104°F and 0.1 mm Hg.
Cobaltocene appears as black-purple crystals or black solid. Sublimes at 104°F and 0.1 mm Hg. (NTP, 1992)
Cobaltocene appears as black-purple crystals or black solid. Sublimes at 104°F and 0.1 mm Hg. (NTP, 1992)
Characteristics
0 Ų
2.04300
purplish-black crystal
172 °C
173℃ [CRC10]
Insoluble in water.Air-sensitive. Highly flammable.
0-6°C
Peritoneal-rat LD50: 55 mg/kg; peritoneal-mouse LD50: 80 mg/kg
Combustible; burning produces toxic cobalt compound fumes
Air-sensitive. Highly flammable. Insoluble in water.
Hydrocarbons, Aromatic
Highly Flammable
COBALTOCENE is very sensitive to air and is readily oxidized. It is also sensitive to exposure to light. Readily oxidized by water and dilute acids (NTP, 1992).
Safety Information
II
4.1
UN 1325 4.1/PG 3
3
11-68-42/43-40
16-33-7/9-36/37-22
GG0350000
F,Xn
Treasury is ventilated, low temperature and dry; stored separately from food materials
Stable, but very reactive and air and moisture sensitive - store under inert gas. Incompatible with strong oxidizing agents. Highly flammable.
P210-P261-P280-P342 + P311
H228-H317-H334-H341-H351
Vendor information indicates that this chemical is flammable. (NTP, 1992)
|Danger|H228 (100%): Flammable solid [Danger Flammable solids]|P201, P202, P210, P240, P241, P261, P272, P280, P281, P285, P302+P352, P304+P341, P308+P313, P321, P333+P313, P342+P311, P363, P370+P378, P405, and P501|Aggregated GHS information provided by 44 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 133 [Flammable Solids]: As an immediate precautionary measure, isolate spill or leak area for at least 25 meters (75 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 100 meters (330 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store it in a freezer. All handling should be under an inert atmosphere. STORE AWAY FROM SOURCES OF IGNITION. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
Drug Information
ACUTE/CHRONIC HAZARDS: This compound is toxic by ingestion. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Generally, the induction of vomiting is NOT recommended outside of a physician's care due to the risk of aspirating the chemical into the victim's lungs. However, if the victim is conscious and not convulsing and if medical help is not readily available, consider the risk of inducing vomiting because of the high toxicity of the chemical ingested. Ipecac syrup or salt water may be used in such an emergency. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Cobaltocene Use and Manufacturing
Polymerization inhibitor of olefins up to 200C, Diels–Alder reaction, catalyst, paint drier, oxygen stripping agent.
Cobaltocene: ACTIVE
Computed Properties
Molecular Weight:189.12
Hydrogen Bond Acceptor Count:2
Exact Mass:189.011444
Monoisotopic Mass:189.011444
Heavy Atom Count:11
Complexity:11.6
Covalently-Bonded Unit Count:3
Compound Is Canonicalized:Yes
Recommended Suppliers of Cobaltocene
-
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 1277-43-6Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
Zinc acrylate
14643-87-9
-
Tetrasodium EDTA
64-02-8
-
As-Propylarsonic acid
107-34-6
-
((4S,5S)-(-)-O-[1-Benzyl-1-(5-methyl-2-phenyl-4,5-dihydrooxazol-4-yl)-2-phenylethyl]-dicyclohexylphosphinite)(1,5-COD)iridium(I) tetrakis(3,5-bis(trifluoromethyl)phenylborate, min. 97% (S,S)-[COD]Ir[c Formula
583844-38-6
-
Sodium dichloroisocyanurate Formula
2893-78-9
-
Dichlorotris(triphenylphosphine)ruthenium Formula
15529-49-4
-
(4-Bromophenyl)hydrazine Structure
589-21-9
-
DICHLOROTETRAKIS(2-(2-PYRIDINYL)PHENYL)I Structure
92220-65-0
-
What is (ETHYL BENZOATE)TRICARBONYLCHROMIUM
32874-26-3
-
What is Ceramic materials and wares, chemicals
66402-68-4