Tips on How to Raise Cyanuric Acid in Pool

If you are a pool owner or have a separate pool in the backyard of your private villa, do you know how to maintain your pool? It's useful to understand the chemical knowledge before you put the chemical products into your pool. One of the most important chemical elements of a pool is cyanuric acid. Many passages talk about the importance of lowering cyanuric acid in the pool. How to raise cyanuric acid in pool? What are the pros and cons of cyanuric acid? Let’s find out together.

What is cyanuric acid in pool?

Cyanuric acid is a white crystal at room temperature that precipitates from water with two crystalline waters. Cyanuric acid has been used for the first time since 1958 to disinfect swimming pool water to slow down the consumption of chlorine-based disinfectants.

Although some laboratory studies have shown that cyanuric acid is relatively stable and undergoes little biological degradation in the laboratory environment. However, in the natural environment, cyanuric acid is slowly decomposed to CO2 and NH3 under the influence of microorganisms or ultraviolet light.

What are the pros and cons of cyanuric acid in pool?

Cyanuric acid, as one of the items in swimming pool water quality testing, has a very important relationship with swimming pool disinfectant dosing, and excessive cyanuric acid in swimming pools may pose certain health hazards.

Cyanuric acid is a toxic substance that may cause eye and skin irritation, respiratory problems, and neurological damage if the human body is exposed to high concentrations of cyanuric acid for a long period.

The use of traditional swimming pool disinfectants such as strong chlorine concentrate also releases cyanuric acid when the water is interpreted to release hypochlorous acid. When the cyanuric acid is too low, it does not serve to stabilize the residual chlorine in the swimming pool, causing the hypochlorous acid to decompose rapidly in the presence of light and thus losing its ability to continually disinfect the swimming pool.

On the contrary, when the concentration of cyanuric acid in the swimming pool is too high, in addition to endangering the health of swimmers, cyanuric acid will also be recombined with the residual chlorine in the swimming pool, resulting in a decrease in the concentration of effective residual chlorine in the swimming pool, so that the chlorine is too stable to achieve the effect of disinfection, resulting in swimming pool water becoming turbid.

How to raise cyanuric acid in pool?

If cyanuric acid is detected to be low in a swimming pool, how can swimming pool water treatment be utilized to solve the problem of lacking cyanuric acid? Here are some common solutions:

1. Testing the cyanuric acid level regularly

In the absence of cyanuric acid, chlorine will be degraded more quickly by UV light. Cyanuric acid levels should be tested weekly and should be less than 200 mg/liter. Many authorities recommend a level between 25 and 50 mg/l for maximum effectiveness.

Test strips are the easiest way to test for cyanuric acid. Unlike free chlorine, cyanuric acid levels should be maintained daily. An exception may occur if there is a rainstorm and the pool is not covered. Rain can introduce large amounts of fresh water into the pool, which can dilute the concentration of cyanuric acid. In this case, you should always test your pool's chemical composition.

2. Add pure cyanuric acid to your pool

There is a possibility of damaging the pool surface if you just pour cyanuric acid directly into the pool. It is recommended to put the cyanuric acid in a sock and place the sock in a skimmer. As long as the sock doesn't completely block the skimmer that method works great and is reasonably simple. Remember to run the pump for 24 hours after adding CYA and don't backwash or clean the filter for a week.

3. Use stabilized chlorine

Stabilizers help your pool retain chlorine for long periods. To ensure the pool is clean, safe, and bacteria-free, chlorine should be added regularly. There is a direct correlation between the free chlorine value and the cyanuric acid value.

Conclusion

After reading this passage, you may be clear about how to raise cyanuric acid in pool. Keeping daily maintenance and management of swimming pools is a key measure to ensure the safety of swimmers, and can extend the service life of the pool.