Butylglycidylether Industrial Grade
2426-08-6
Industrial Grade
SHANGHAI
180kg/9kg Blue HDPE Drum (Used For PG)
2016-11-30
-
Product Description
-
Seller Information
-
Description
XY501 Reactive Diluent
1. Description
Chemical name: Butyl Glycidyl Ether (BGE). Molecular formula：C7H14O2， molecular weight：130，
Structural Formula: C4H9OCH2(CHCH2)O，CAS No: 2426-08-6
Physical and Chemical Character: Colorless Transparent Liquid, little irritant smell, low toxic,specific gravity: 0.92-0.94, flash burning point: ＞150 ℃
2. Technical Data Sheet (TDS)
Specifications
XY501P
XY501A
XY501B-1
XY501B-2
XY501B-3
Color, APHA
≤20
≤20
≤20
≤60
≤60
Viscosity，mPas(25℃)
≤2
≤2
≤2
≤3
≤3
Epoxide Equivalent g/eq
-
≤159
≤167
≤182
≤200
Hydrolyzable chloride eq/100g
-
≤0.01
≤0.01
≤0.01
≤0.01
Inorganic chlorine eq/100g
-
≤0.001
≤0.001
≤0.005
≤0.005
Total Chloride
Ppm
≤200
-
-
-
Moisture %
≤0.1
≤0.5
≤0.5
≤0.5
≤0.5
Purity
≥99.0%
-
-
-
-
3. Application
Combined with Liquid Epoxy Resin, suitable for Epoxy embedding material, Casting material, Encapsulating material, Coating Material, and Adhesive. To be used in non-solvent unticorrosion coating, widing-forming.Application features: Low viscosity, improve the tenacity and adhesion of cured epoxy resin, good solubility with various epoxy resins.
4. Packing
- Packed in 20 kg or 180kg plastic drum or 900kgs/IBC container.
- Storage and transportation must conform to basic requirements of normal chemicals.
- Store in a cool, dry and well ventilated area. Keep away from ignition sources, heat and flame and sunlight
- It is necessary to maintain insulated (tightly seal) after use, in order to avoid negative influence arousing from moisture absorption.
5. Attention:
- Avoid contact with skin and eyes. In case of skin contact, flush with soap and water immediately, in case of eyes contact, rinse with flowing water immediately. If swallowed, get medical aid.
- The working environment must be ventilation.
- The information above is only for your reference, please test before use. Any further inquiry in application, please feel free to contact us in time.
6.Please note that all information provided by XYCC or HYCC is considered accurate in certain condition. However we will not promise or bear any legal responsibility due to factors in producing and processing products. The customer should test applicability of our products fully before using it.
Basic Info-
Product Name:
Butyl glycidyl ether
Other Name:Butyl 2,3-epoxypropyl ether~Glycidol butyl ether;NBGE;n-Butylglycidylether,95%;Butyl gylcidyl ether.;n-Butyl glycidyl ether (BGE);1-butoxy-2,3-epoxy-propan;2,3-Epoxypropylbutylbutylether;3-Butoxy-1,2-epoxypropane
CAS No.:2426-08-6
Molecular Formula:C7H14O2
InChIKeys:YSUQLAYJZDEMOT-UHFFFAOYSA-N
Molecular Weight:130.18
Exact Mass:130.18
BRN:103668
EC Number:219-376-4
ICSC Number:0115
NSC Number:83413
UN Number:1993
TSCA:TSCA listed
DSSTox ID:DTXSID9024691
Color/Form:Clear colorless
HScode:29109000
Characteristics-
PSA:
21.76000
XLogP3:1.20190
Appearance:N-butyl glycidyl ether appears as colorless to pale yellow liquid with a strong, slightly unpleasant odor. Flash point approximately 164°F. Denser than water. Vapors are heavier than air. Vapors may irritate the nose, throat and respiratory tract. Ingestion or inhalation may cause central nervous system depression. Liquid contact may severely irritate the eyes and skin. Prolonged contact with the skin may cause defatting and drying.
Density:0.91 g/mL at 25 °C(lit.)
Melting Point:59 °C
Boiling Point:164-166 °C(lit.)
Flash Point:132 °F
Refractive Index:n20/D1.418(lit.)
Water Solubility:2 g/100 mL
Storage Conditions:Keep tightly closed in a cool place in a tightly closed container.
Vapor Pressure:5 hPa (20 °C)
Vapor Density:Relative vapour density (air = 1): 3.78
Toxicity:LD50 orally in Rabbit: 1660 mg/kg LD50 dermal Rabbit 2520 mg/kg
Flammability characteristics:Flammable
Explosive limit:Explosive limits , vol% in air: see Notes
Odor:Irritating odor
Henrys Law Constant:4.0×10-1mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
Experimental Properties:Concentration in saturated air at 25 °C = 0.42%|1 ppm = 5.32 mg/ cu m at 25 °C, 760 mm Hg; 1 mg/L = 188 ppm at 25 °C and 760 mm Hg.|Hydroxyl radical reaction rate constant 2.0X10-11 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Highly flammable. Butyl glycidyl ether may be sensitive to prolonged exposure to air, may form explosive peroxide in contact with air.
Reactive Group:Ethers
Reactivity Alerts:Highly Flammable
Reactivity Profile:Butyl glycidyl ether, an ether, can act as a base. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Autoignition Temperature:215 °C
Flammable Limits:Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.
Critical Temperature & Pressure:Store below +30°C.
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Acute toxicity - Category 4, Oral
Skin sensitization, Category 1
Acute toxicity - Category 4, Inhalation
Specific target organ toxicity â single exposure, Category 3
Germ cell mutagenicity, Category 2
Carcinogenicity, Category 2
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
H302 Harmful if swallowed
H317 May cause an allergic skin reaction
H332 Harmful if inhaled
H335 May cause respiratory irritation
H341 Suspected of causing genetic defects
H351 Suspected of causing cancer
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
P203 Obtain, read and follow all safety instructions before use.
P273 Avoid release to the environment.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P317 If skin irritation or rash occurs: Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P317 Get medical help.
P319 Get medical help if you feel unwell.
P318 IF exposed or concerned, get medical advice.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Above 54°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants, strong bases, strong acids and amines. Cool. Keep in the dark.Fireproof. Separated from strong oxidants, strong bases, strong acids. Cool. Keep in the dark.
-
-
Seller Information
-
Business Type:
Manufactory
-
Location:
No.16 Zijin Road,Circular Economy Zone,Huizhou District,Huangshan City,Anhui,China
A high-technical enterprise-Anhui Xengyuan Chemical Co., Ltd(XYCC),specializes in producing Solid Epoxy Resins,Epoxy Reactive Diluent and Curing Agent,and collects scientific research,development,production,sale into an organic whole.And its total investment is more than USD8,000,000.00. After many years development (Established in 2000), XYCC now we has 32 production lines, the yearly capacity of Solid Epoxy Resin should be over 25000 tons, and the total sales volume in 2006 exceeded USD46,000,000.00, the market share of Solid Epoxy Resin in China will up to 18%,and due to the stable and good quality,our main production - Epoxy Resins (E-12,E-20) were awarded the title - "Production Exempting from inspection"by the General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China (AQSIQ). In order to meet the market demand,we founded a new factory in 2004 - Anhui Xinyuan Chemical Co.Ltd.(XYCC).And after associating with domestic famous academy,XYCC has successfully developed new and high-tech Productions with our own property right,and successfully set up several production lines of Epoxy Reactive Diluent and Epoxy Curing Agent,and the yearly capacity will up to 5000 tons.The quality and performance of Diluent and Curign agent is as good as,or even better than that of imported productions. We regard the quality of productions as our lives, and have already had perfect laboratories, and successfully passed the authentification of ISO9001:2000. We also commit ourselves to the environment protection, and have duly built the largest sewage purification system in HuangShan city, and are now making great efforts to attain ISO14001 Environment Management approval. There are more than 160 employees among which there are 40 various technicians and 30% of the talents from famous colleges and universities. Relied on good credit standing and technical production, we were named as “Reliable Quality Enterprise”, “Grade AA creditable Enterprise”, “Excellent private enterprise” by Huangshan government. We have been making great effort to strive for the first grade enterprise under the principle - "United, Realistic, Efficient, Innovative", and warmly welcome all customers to contact and cooperate with us.
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
