Butyl glycidyl ether
ISO
2426-08-6
Industrial Grade
99%
200kg/drum
2023-07-04
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202647 visits to its shop, is a reputable Manufactory that has been providing Butyl glycidyl ether 2426-08-6 products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Butyl glycidyl ether
Other Name:Butyl 2,3-epoxypropyl ether~Glycidol butyl ether;NBGE;n-Butylglycidylether,95%;Butyl gylcidyl ether.;n-Butyl glycidyl ether (BGE);1-butoxy-2,3-epoxy-propan;2,3-Epoxypropylbutylbutylether;3-Butoxy-1,2-epoxypropane
CAS No.:2426-08-6
Molecular Formula:C7H14O2
InChIKeys:YSUQLAYJZDEMOT-UHFFFAOYSA-N
Molecular Weight:130.18
Exact Mass:130.18
BRN:103668
EC Number:219-376-4
ICSC Number:0115
NSC Number:83413
UN Number:1993
TSCA:TSCA listed
DSSTox ID:DTXSID9024691
Color/Form:Clear colorless
HScode:29109000
Categories:
Characteristics-
PSA:
21.76000
XLogP3:1.20190
Appearance:N-butyl glycidyl ether appears as colorless to pale yellow liquid with a strong, slightly unpleasant odor. Flash point approximately 164°F. Denser than water. Vapors are heavier than air. Vapors may irritate the nose, throat and respiratory tract. Ingestion or inhalation may cause central nervous system depression. Liquid contact may severely irritate the eyes and skin. Prolonged contact with the skin may cause defatting and drying.
Density:0.91 g/mL at 25 °C(lit.)
Melting Point:59 °C
Boiling Point:164-166 °C(lit.)
Flash Point:132 °F
Refractive Index:n20/D1.418(lit.)
Water Solubility:2 g/100 mL
Storage Conditions:Keep tightly closed in a cool place in a tightly closed container.
Vapor Pressure:5 hPa (20 °C)
Vapor Density:Relative vapour density (air = 1): 3.78
Toxicity:LD50 orally in Rabbit: 1660 mg/kg LD50 dermal Rabbit 2520 mg/kg
Flammability characteristics:Flammable
Explosive limit:Explosive limits , vol% in air: see Notes
Odor:Irritating odor
Henrys Law Constant:4.0×10-1mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
Experimental Properties:Concentration in saturated air at 25 °C = 0.42%|1 ppm = 5.32 mg/ cu m at 25 °C, 760 mm Hg; 1 mg/L = 188 ppm at 25 °C and 760 mm Hg.|Hydroxyl radical reaction rate constant 2.0X10-11 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Highly flammable. Butyl glycidyl ether may be sensitive to prolonged exposure to air, may form explosive peroxide in contact with air.
Reactive Group:Ethers
Reactivity Alerts:Highly Flammable
Reactivity Profile:Butyl glycidyl ether, an ether, can act as a base. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Autoignition Temperature:215 °C
Flammable Limits:Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.
Critical Temperature & Pressure:Store below +30°C.
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Acute toxicity - Category 4, Oral
Skin sensitization, Category 1
Acute toxicity - Category 4, Inhalation
Specific target organ toxicity â single exposure, Category 3
Germ cell mutagenicity, Category 2
Carcinogenicity, Category 2
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
H302 Harmful if swallowed
H317 May cause an allergic skin reaction
H332 Harmful if inhaled
H335 May cause respiratory irritation
H341 Suspected of causing genetic defects
H351 Suspected of causing cancer
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
P203 Obtain, read and follow all safety instructions before use.
P273 Avoid release to the environment.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P317 If skin irritation or rash occurs: Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P317 Get medical help.
P319 Get medical help if you feel unwell.
P318 IF exposed or concerned, get medical advice.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Above 54°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants, strong bases, strong acids and amines. Cool. Keep in the dark.Fireproof. Separated from strong oxidants, strong bases, strong acids. Cool. Keep in the dark.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
Hot Related Products
-
![Caustic Soda-Batong]( "Caustic Soda-Batong")
Caustic Soda-Batong -
![Caustic Soda Flakes / Pearl Sodium Hydroxide Naoh High Purity 99% 98.5% 98% price]( "Caustic Soda Flakes / Pearl Sodium Hydroxide Naoh High Purity 99% 98.5% 98% price")
Caustic Soda Flakes / Pearl Sodium Hydroxide Naoh High Purity 99% 98.5% 98% price$450-550/MT FOB
-
![Caustic Soda Flakes White]( "Caustic Soda Flakes White")
Caustic Soda Flakes White -
![Industrial Grade 99% Caustic Soda in Flake Pearl and Solid Forms]( "Industrial Grade 99% Caustic Soda in Flake Pearl and Solid Forms")
Industrial Grade 99% Caustic Soda in Flake Pearl and Solid Forms -
![Sodium hydroxide White translucent crystalline solid]( "Sodium hydroxide White translucent crystalline solid")
Sodium hydroxide White translucent crystalline solid -
![Sodium Hydroxide 50% Liquid Vietchem Vietchem]( "Sodium Hydroxide 50% Liquid Vietchem Vietchem")
Sodium Hydroxide 50% Liquid Vietchem Vietchem
