Chloro-sulfonated polyethylene anticorrosive paint

Product composition:

Chloro-sulfonated polyethylene anti-cracking anticorrosion coating is composed of chlorosulfonated polyethylene rubber as base material, including special resin, filler, plasticizer, organic solvent, etc. Two kinds of primer and surface paint, both of which are a and b package.

Product features:

Chlorosulfonated polyethylene crack anticorrosive coatings with excellent crack resistance, good acid, alkali, salt chemical corrosive medium, weather aging resistance, resistance to chemical atmosphere, quick drying, low temperature construction, easy to use.

Product use:

Chlorosulfonated polyethylene crack anticorrosive coatings can be widely used in all kinds of chemical medium erosion, has the high crack requirements of anticorrosion coating on the surface of the building, also can be used for the water erosion of building structure anti-cracking waterproof coating.

Instructions:

Coating method: spraying, brushing, rolling

Technical indicators:

Appearance: primer: colorless or light-colored; Finish: colors

Diluent: special diluent of X-1 chlorosulfonated polyethylene coating

Proportioning: group a: part b =10:1 (weight ratio)

Flash: component: 10 ℃; Component b: 16 ℃

Shelf life: 23 + 2 ℃ : 12 hours

Ripening stage: mixing can be used

Drying time: 23 + 2 ℃ : dry table 0.5 hours, 24 hours a day, completely curing 7 days

Packing specifications:

A group of iron bucket 18.5L 17 and 20 kg;

Part b iron bucket 18.5L 17kg;

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid prolonged inhalation of the solvent

Steam or paint fog, the skin, eyes are not allowed to contact this product, in the narrow place or the air is not in the general construction, must provide strong ventilation, should wear good protective equipment during construction. Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. If the above data is changed,

Our latest instruction is subject to change without notice.