Antistatic industrial floor coating

Product introduction:

By modified epoxy resin, coloring fillers, additives and elasticity made from poly acyl curing agent of high solid grouping of two-component coating, construction at the scene also need to add wear-resisting packing even after use.

Main features:

Thick film industry floor coating film thickness, one time film can reach more than 1 mm; Paint film is resistant to oil, corrosion, high gloss, soft and elegant, dustproof, durability, impact resistance, abrasion resistance, toughness and elasticity.

Product use:

The thick film industry floor coating is suitable for the floor of production workshop and hotel, gymnasium, station, warehouse, etc.

Instructions:

Coating method: batch, scratch, brush, roll

Coating number: two bottom two - three sides, dry film up to 120 micron; It can also be determined according to user units.

Coating interval: 23± 2 ℃ : minimum 6 hours, the longest 2 days

Technical indicators:

Appearance: colorful, full of film, light, light

Thinner: X-7 epoxy paint thinner

Ratio: paint: a: b = 3:1; Bottom: paint: packing =100:80~ 100; Middle layer: paint: packing =100:60~ 90; Surface layer: a: b =3:1 (because of the different requirements of the floor, the matching will be changed, in case of the batch of qualified certificate)

23 & plusmn maturation period; 2 ℃ : 40 minutes

Applicable period: 23± 8 hours 2 ℃ :

Sheen: 88%

Abrasion resistance: 9.7mg

Tensile strength: 290N/cm2

Dry time: 23± 2 ℃ : dry table 4 hours or less, work 24 hours or less

Theory of usage: bottom, middle: 900 g / ㎡ (total paint and packing); Surface: 120 g / ㎡

Film thickness: dry film: bottom: middle 400 micron; Surface: 50 microns

Packing specifications:

Part b: 20L 18 and 20kg group b: 18.5L 12~ 15kg; Packing, plastic 25kg

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 12 months. After that, it should be checked and used.

Notes:

Safety: the construction site should have good ventilation condition, prevent solvent gas and spray paint mist inhalation.

Note: products should be kept away from heat source. Smoking should be strictly prohibited in construction site. This manual is prepared according to the knowledge and experience gained in our laboratory and construction practice, but the coating construction process is usually outside the control of our company.