Silicone Defoamer/Food and Drug Processing/Fast Foam Breaking

FRATURES

● The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation.

● Antifoaming agent component does not contain NP, APEO.

● It is easy to be diluted into low-content emulsions.

COMPOSITION

● Composed of modified polysiloxane, synergist and silica particles.

HOW TO USE

● XY-1030 Antifoam can be diluted with thickening water. In the process of dilution,  the  speed  of  stirring  is  between  30  to  60  rpm  and  the  time  of  stirring  is recommended for no more than 10 minutes. Please request the company’s customer service department for the specific dilution method. The company accepts no responsibility for any loss which may be incurred by the customer as a result of incorrect usage.

● It is suggested that the product is added in a place where the antifoam can disperse easily.

The optimal adding point, adding amount, adding method and dilution ratio shall be decided by the customer according to the actual situation on site.

PACKAGE AND STORAGE

The product is available in 25kg or 200kg plastic buckets; sizes can be customized according to special requirements. This product can be stored as a normal chemical, away from heat sources and direct sunlight. No exposure to rain. Keep away from flame. Don’t add acid, alkali, salt and other corrosive substances to this product.   

Ensure the container is sealed after using. If this product begins to stratify after long storage, stir it evenly at 30 to 60 rpm.

This product may freeze under 0C (32℉); if this happens, stir well after defrosting the antifoam at a rate of 30 to 60 rpm. In these cases, stirring will not affect the performance of the product if carried out at the recommended speed. When stored between 5 and 40C (41- 104℉) in the original unopened containers, the product is usable 9 months from the date of manufacture.

Frequent asked questions:
1.What is a defoamer? What is the function?
Defoamer is an additive that eliminates foam and inhibits the generation of new foam. In the production and application of paint, textile, medicine, fermentation, papermaking, water treatment and petrochemical industries, a large amount of foam will be generated, which will affect the product quality and production process. Based on the suppression and elimination of foam, a specific amount of defoamer is usually added to the production.

2.Which industries need our defoaming products? 

3.What is MOQ? 
We accept small MOQ,usually 1-5MTS are acceptable,will adapt MOQ according detail situation.

4.what is payment term? 
We accept payment through T/T,L/C.
Usually we will need 100% as prepay(according order amount). rest payment should be made according bill of lading.

5.What is delivery time?
Average delivery time is 2-4weeks,according detail situation.