Isobutyl acetate
ISO
110-19-0
Industrial Grade
99%
200kg/barrel
2023-12-31
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202725 visits to its shop, is a reputable Manufactory that has been providing Isobutyl acetate products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Isobutyl acetate
Other Name:Acetic acid,2-methylpropyl ester;Acetic acid,isobutyl ester;Isobutyl acetate;β-Methylpropyl ethanoate;2-Methylpropyl acetate;NSC 8035
CAS No.:110-19-0
Molecular Formula:C6H12O2
InChIKeys:InChIKey=GJRQTCIYDGXPES-UHFFFAOYSA-N
Molecular Weight:116.16
Exact Mass:116.16
BRN:1741909
EC Number:203-745-1
UNII:7CR47FO6LF
ICSC Number:0494
NSC Number:8035
UN Number:1213
DSSTox ID:DTXSID5026837
Color/Form:Colorless liquid
HScode:2915 39 00
Categories:
Characteristics-
PSA:
26.3
XLogP3:1.60
Appearance:Clear Liquid
Density:0.8712 g/cm3 @ Temp: 20 °C
Melting Point:-98.8 °C
Boiling Point:116.5 °C
Flash Point:71 °F
Refractive Index:n 20/D 1.39(lit.)
Water Solubility:H2O: 7 g/L (20 ºC)
Storage Conditions:Flammables area
Vapor Pressure:15 mm Hg ( 20 °C)
Vapor Density:>4 (vs air)
Toxicity:Oral-Rat LD50: 13400 mg/kg
Flammability characteristics:Inflammable in case of open flame, high temperature, oxidant; burning produces irritating smoke
Explosive limit:2.4-10.5%(V)
Odor:Fruit-like odor
Taste:CHARACTERISTIC ETHER-LIKE, SLIGHTLY BITTER FLAVOR
PH:Neutral
OH:5.50e-12 cm3/molecule*sec
Henrys Law Constant:4.54e-04 atm-m3/mole|Henry's Law constant = 4.54X10-4 atm-cu m/mol at 25 °C
Experimental Properties:Dissolve a wide variety of resins and plastics.|Hydroxyl radical reaction rate constant = 5.52X10-12 cu-cm/molc sec at 25 °C
Air and Water Reactions:Highly flammable. Insoluble in water.
Reactive Group:Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Reactivity Alerts:Highly Flammable
Reactivity Profile:ISOBUTYL ACETATE reacts exothermically with acids to give alcohols and other acids. May react sufficiently exothermically with strong oxidizing acids to ignite the reaction products. Reactions with bases also generate heat. Combination with strong reducing agents (alkali metals and hydrides) generates flammable hydrogen.
Autoignition Temperature:793 °F (USCG, 1999)|421 °C (790 °F)|421 °C
Heat of Combustion:-13,000 Btu/lb = -7220 cal/g = -302X10+5 J/kg (est)
Ionization Potential:9.97 eV
Flammable Limits:Lower flammable limit: 1.3% by volume; Upper flammable limit: 10.5% by volume|Class IB Flammable Liquid: Fl.P. below 73°F and BP at or above 100°F.
Physical Dangers:The vapour mixes well with air, explosive mixtures are easily formed.
Heat of Vaporization:35.9 kJ/mol at bp
Critical Temperature & Pressure:Critical temperature: 562 K; critical pressure: 2.97 MPa
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 2
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H225 Highly flammable liquid and vapour
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Do NOT use compressed air for filling, discharging, or handling. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants, strong bases and strong acids.... MATERIALS WHICH ARE TOXIC AS STORED OR WHICH CAN DECOMPOSE INTO TOXIC COMPONENTS ... SHOULD BE STORED IN A COOL WELL VENTILATED PLACE, OUT OF THE DIRECT RAYS OF THE SUN, AWAY FROM AREAS OF HIGH FIRE HAZARD, AND SHOULD BE PERIODICALLY INSPECTED. INCOMPATIBLE MATERIALS SHOULD BE ISOLATED ...
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
