Dichlorodiethylsilane
ISO 2 Inquiries
1719-53-5
Industrial Grade
99%
200kg/drum
2023-06-30
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 201477 visits to its shop, is a reputable Manufactory that has been providing Dichlorodiethylsilane products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Dichlorodiethylsilane
Other Name:Silane,dichlorodiethyl-;Dichlorodiethylsilane;Diethyldichlorosilane;Diethyldichlorosilicon
CAS No.:1719-53-5
Molecular Formula:C4H10Cl2Si
InChIKeys:InChIKey=BYLOHCRAPOSXLY-UHFFFAOYSA-N
Molecular Weight:157.11
Exact Mass:157.11
BRN:605313
EC Number:217-005-0
UNII:Z1272A2B31
UN Number:1767
DSSTox ID:DTXSID3025043
Color/Form:Colorless liquid
HScode:29310095
Categories:
Characteristics-
PSA:
0
XLogP3:4.25
Density:1.0504 g/cm3 @ Temp: 20 °C
Melting Point:-96.5 °C
Boiling Point:130 °C
Flash Point:83 °F
Refractive Index:n 20/D 1.43(lit.)
Water Solubility:H2O: insoluble ;1 G SOL IN 100 ML ETHER
Storage Conditions:Flammables area
Vapor Pressure:11.9 mm Hg at 25 deg C
Vapor Density:5.14 (Air = 1)
Toxicity:Oral-rat LDL0: 1000 mg/kg
Flammability characteristics:Flammable; emits toxic hydrogen chloride gas in water; emits toxic gas in fire
Explosive limit:Lower explosive limit: 3.4%; Upper explosive limit: > or = 9.5%
Experimental Properties:Readily hydrolyzed with liberation of hydrochloric acid|The reaction of organosilanes with halogens and halogen compounds usually proceeds in good yield through cleavage of the Si--H bond and formation of the silicon-halogen bond. Reaction with fluorine, however, does not proceed satisfactorily because of cleavage of not only the Si--H but also C--Si and C--H bonds. Direct halogenation with chlorination, bromine, and iodine proceeds smoothly, however. /Organosilanes/
Air and Water Reactions:Highly flammable. Readily decomposed by water to hydrochloric acid with evolution of heat. Diethyldichlorosilane reacts vigorously with water to generate gaseous HCl. Based on a scenario where the chemical is spilled into an excess of water (at least 5 fold excess of water), half of the maximum theoretical yield of hYDROGEN cHLORIDE gas will be created in 14 minutes. Experimental details are in the following: "Development of the Table of Initial Isolation and Protective Distances for the 2008 Emergency Response Guidebook", ANL/DIS-09-2, D.F. Brown, H.M. Hartmann, W.A. Freeman, and W.D. Haney, Argonne National Laboratory, Argonne, Illinois, June 2009.
Reactive Group:Chlorosilanes
Reactivity Alerts:Highly Flammable
Reactivity Profile:Chlorosilanes, such as DIETHYLDICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.
Corrosivity:Corrosive
Heat of Vaporization:10,038.6 gcal/gmol
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Skin corrosion, Sub-category 1B
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H226 Flammable liquid and vapour
H314 Causes severe skin burns and eye damage
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P319 Get medical help if you feel unwell.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
SRP: Operations involving entry into tanks or closed vessels, and emergency situations, require consideration of potentially oxygen deficient, or "immediately dangerous to life and health" IDLH environments. This may necessitate use of a self-contained breathing apparatus (SCBA), or a positive pressure supplied air respirator.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Inquiry History2 Inquiries
Country Product Purchase Quantity Date Posted 
South Korea
Dichlorodiethylsilane
500 KG Mar 6, 2026
South Korea
Dichlorodiethylsilane
500.00 KG Feb 5, 2026 Post an enquiry for this product