Ethoxylated Nonylphenol

Product name:Ethoxylated Nonylphenol

Manufacturer: EAST  CHEM SOURCES  LIMITED

Post code: 266100

Tel:  86-532-81906761

CHEMICAL NAME                                                                       CAS  NO.                        % (w/w)

Ethoxylated Nonylphenol                                                       9016-45-9                          100

Hazards type:Non-hazards

Human health hazards:

The steam pressure of the product is low,so there is no inhalation hazards.

Combustion hazards: combustible, non irritating

Eye Contact:

Check for and remove any contact lenses.  Immediately flush eyes with running water for at  least 15

minutes, keeping eyelids

open. Cold water may be used. Get medical attention.

Skin Contact:

In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient.

Remove contaminated

clothing and shoes. Cold water  may be used.Wash clothing before reuse. Thoroughly clean shoes before

reuse. Get medical

attention.

Serious Skin Contact:

Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek

immediate medical

attention.

Inhalation:

If inhaled, remove to fresh air. If not breathing, give artificial respiration.  If breathing is difficult, give

oxygen. Get medical

attention if symptoms appear.

Serious Inhalation:

Evacuate the victim to a safe area as soon as possible.  Loosen tight clothing such as a collar, tie, belt or

waistband. If

breathing is difficult, administer oxygen.  If the victim is not breathing, perform mouth-to-mouth

resuscitation. Seek medical

attention.

Ingestion:

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to

an unconscious

person. If large quantities of this  material are swallowed, call a  physician immediately. Loosen tight

clothing such as a collar,

tie, belt or waistband.

Serious Ingestion: Not available.

FLASH POINT :  >220 。C

EXTINGUISHING  MEDIA

Foam  Carbon dioxide  Dry powder  Other extinguishing agent suitable for Class  B fires   For large fires, use

water spray or fog, thoroughly drenching the  burning  material.  Water mist may be used to cool closed

containers.

UNSUITABLE EXTINGUISHING MEDIA

Do not use water unless flooding amounts are available.

FIRE AND  EXPLOSION HAZARD

Low Fire Hazard; liquids may burn upon heating to temperatures at or above the flash point.   Empty

product containers may contain product residue.  Do not pressurize, cut, heat, weld, or expose containers to flame or other sources of ignition.   May evolve oxides of carbon (COx) under fire conditions.

SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING

In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit.

Small Spill:

Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.

Large Spill:

Flammable liquid. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Absorb with DRY earth,

sand or other non-combustible material.  Do not touch spilled material. Prevent entry into sewers, basements or confined

areas; dike if needed. Be careful that the product is  not present at a concentration level above TLV. Check TLV on the MSDS

and with local authorities.

Keep in a tightly closed container, stored in a cool, dry, ventilated area.  Protect against physical damage.

Containers of this  material may be hazardous when

empty since they retain product residues (dust, solids, vapors, liquid); observe all warnings and

precautions listed for the product.

OCCUPATIONAL EXPOSURE LIMITS

This product does not contain any substance that  has an established exposure limit.

ENGINEERING MEASURES

General ventilation is recommended.

PERSONAL PROTECTION

GENERAL ADVICE

The use and choice of personal  protection equipment is related to the hazard of the product, the

workplace and the way the product is handled.  In general, we recommend as a minimum precaution that

safety glasses with side-shields and workclothes protecting arms, legs and body be used.  In addition any  person

visiting an area where this product is handled should at least wear safety glasses with side-shields.

RESPIRATORY PROTECTION

At ambient temperature none needed for vapour.  If product is heated or if aerosol generation is likely, the use of a  half face filter mask is recommended.  An organic vapor cartridge with dust/mist prefilter may be used. If respiratory protection is required, institute a complete respiratory protection program including selection, fit

testing, training, maintenance and inspection.

HAND PROTECTION

Nitrile gloves, Butyl gloves, Neoprene gloves, PVC gloves

SKIN PROTECTION

See general advice.

EYE PROTECTION

Wear chemical splash goggles.

HYGIENE RECOMMENDATIONS

Use good work and personal  hygiene practices to avoid exposure.  Consider the provision in the work area

of a safety shower and eyewash.  Always wash thoroughly after handling chemicals. When handling this

product never eat, drink or smoke.

Appearance:  liquid

PH : 5.0~7.0

Freezing point: N.D

Boiling point: N.D

Flash point: ＞220 ℃

Solubility：disperse in water, Soluble in alcohol and Other solvent.

VOC CONTENT: 0 %

Note: These physical properties are typical values for this product and are subject to change.

STABILITY

Stable under normal conditions.

HAZARDOUS POLYMERIZATION

Hazardous polymerization will not occur.

CONDITIONS TO AVOID

Avoid extremes of temperature.

MATERIALS TO AVOID

Contact with strong oxidizers (e.g. chlorine,  peroxides, chromates, nitric acid, perchlorate, concentrated oxygen, permanganate) may generate heat, fires, explosions and/or toxic vapors.

HAZARDOUS DECOMPOSITION PRODUCTS

Under fire conditions:Oxides of carbon

Aquatic organism: slightly

Irritant: slightly

Sensitization: slightly

Mutagenicity: no

Teratogenicity: no

CARCINOGENICITY :

None of the substances in this product are listed as carcinogens  by the  International Agency for Research

on Cancer  (IARC), the National Toxicology Program (NTP) or the American Conference of Governmental

Industrial Hygienists (ACGIH).

HUMAN HAZARD CHARACTERIZATION :

Based on our hazard characterization, the potenairtial human hazard is:   Low

PERSISTENCY AND DEGRADATION

Biological Oxygen Demand (BOD): NO

ENVIRONMENTAL HAZARD CHARACTERIZATION

Based on our hazard characterization, the potential environmental hazard is:   no

Dispose of wastes in an approved incinerator or waste treatment/disposal site, in accordance with all applicable regulations. Do not dispose of wastes in local sewer or with normal garbage.

Empty drums should be taken for recycling, recovery, or disposal through a suitably qualified or   licensed

contractor.

Comply with local regulations.

Classification: This product is not classified as  hazardous

package demand:no special demand

package： 200kg/ drum or 1000kgIBC(Net weight).

The information in this section is for reference only and should not take the place of a shipping  paper (bill

of lading) specific to an order.   Please note that the proper Shipping  Name / Hazard Class may vary by

packaging, properties, and mode of transportation.

Security laws and rules: applicable

Law of environmental  protection: applicable

This product material safety data sheet  provides health and safety information.  The product is to be used in applications consistent with our product literature.   Individuals  handling this product should be informed of

the recommended safety precautions and should  have access to this information.   For any other uses,

exposures should be evaluated so that appropriate handling practices and training programs can be established

to insure safe workplace operations.  Please consult your  local sales representative for any further information.