FH-50 New Compound Carbon Source Supplement

Product Name: New Compound Carbon Source Supplement

Main raw materials:

1. Polyols

2. Fatty acids and their derivatives

3. Polysaccharides

Denitrification mechanism: The addition of carbon source supplements can adjust the carbon-nitrogen ratio of sewage, thereby increasing the denitrification rate, increasing the total nitrogen removal rate, and making the effluent meet the discharge standard.

Performance and Features:

1. The product is friendly to microorganisms and can be directly absorbed and utilized by bacteria through osmosis. It is suitable for a wide range of flora, has strong impact resistance, and takes a short time to cultivate dominant flora.

2. The product combines the advantages of traditional carbon sources, and there will be no problems such as sludge bulking and difficulty in sludge pressure filtration when used for a long time.

3. The product has a high denitrification rate and a wide range of applicable temperatures.

4. The main raw materials of the product are all green plant extracts, which are environmentally friendly and harmless, and are not dangerous goods.

5. The product is suitable for a wide range of pH values, and the pH value of the product can be adjusted according to different water quality, with low impact on the pH value of the effluent.

6. The product is easy to use, and its cost performance is higher than that of traditional carbon sources.

Best application areas:

1. Urban domestic sewage

2. Sewage from aquaculture

3. Slaughterhouse sewage

Usage and precautions:

In order to achieve the best treatment effect and the most economical benefit, before applying this product, the optimal dosage should be determined by quantitative simulation test, and then the production debugging should be carried out.

1. This product should be diluted before use. Depending on the water quality and treatment process, the dilution concentration ranges from 10% to 50% to ensure normal operation.

2. The specific dosage should be determined according to the nature of the water body to be treated and the effluent requirements. Generally, the dosage for removing 1mg of total nitrogen is 10mg~25mg.

3. The best dosing point for carbon source supplements is at the inlet of the anoxic tank. According to the situation of the site process and facilities, the dosing point can also be set after the fine grid, the water distribution well, the water inlet of the oxidation ditch, etc. The residence time of carbon source supplements in the system is good to ensure the denitrification rate of sewage.

Product Specifications:

Safety Data Sheet

1 Product name and use

Product Name: New Compound Carbon Source Supplement

Product use: As a carbon source supplement in water treatment, it can adjust the nutritional balance of microorganisms and improve the denitrification capacity.

Manufacturer: Guangxi Pingguo Fenghua Technology Co., Ltd. Tel: 0776-5688689

2 ingredients

3. Dangerous

The product is non-flammable, non-toxic to the human body, and non-hazardous during use. It is added to the sewage treatment biochemical system in a normal amount, and it is non-toxic and harmless to microorganisms.

Potential health effects on humans:

Ingestion: Do not ingest large quantities

Inhalation: Inhalation of large amounts can cause respiratory irritation, wear a mask

Skin contact: Skin contact may cause slight irritation, so you need to wear necessary protective equipment

Eyewear contact: Prolonged eye contact may cause mild irritation, wear protective glasses

4. First aid measures

Ingestion: Rinse mouth, if you feel unwell, seek medical attention immediately

Inhalation: Keep away from the source of irritation as soon as possible, and go to an open place to breathe fresh air. If you feel unwell, seek medical attention immediately

Skin Contact: Rinse with plenty of water, seek medical attention immediately if irritation occurs.

Eye contact: Rinse with plenty of water, seek medical attention immediately if you feel unwell.

5. Fire protection measures

Flashpoint: meaningless

Burning point: meaningless

Explosive limit concentration: meaningless

Fire extinguishing agent: general sand, dry powder fire extinguishing agent.

Firefighter Protection: Wear Appropriate Fire Fighting Equipment and Equipment

6. Emergency treatment of leakage

Personal protection: Wear protective equipment, try not to directly contact the leaking liquid, keep the site ventilated to keep air circulation, and avoid inhalation and prolonged exposure to a large amount of vapor

Small spills: flush directly with water

Large leaks: collect leaked liquid and lotion for centralized disposal

Preventive measures: There should be a leakage emergency pool and a cofferdam.

7. Handling and storage

Operation requirements: Wear labor protection equipment and take safety precautions.

Storage requirements: keep clean, ventilated, cool, sunscreen and fireproof, and it is forbidden to store together with toxic, harmful, corrosive and oxidizing items.

Packaging requirements: use anti-corrosion materials such as plastic for storage

8. Physical and chemical properties

9. Stability and reactivity

10. Transportation Information