Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE

2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE

2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE structure

2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE 

structure
  • CAS No:

    52253-69-7

  • Formula:

    C9H11BrN2OS

  • Chemical Name:

    2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE

  • Synonyms:

    2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE;4-phenylthiazol-2-ylamine hydrobromide monohydrate;2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE 1-HYDRATE;2-Amino-4-phenylthiazolemonohydratehydrobromide;2-Amino-4-phenylthiazole hydrobromide monohydrate,99%;4-Phenylthiazol-2-amine hydrobromide hydrate

Description

white to beige crystalline powder


2-amino-4-phenylthiazole hydrobromide monohydrate is a white powder. (NTP, 1992)


2-amino-4-phenylthiazole hydrobromide monohydrate is a white powder. (NTP, 1992)

2-AMINO-4-PHENYLTHIAZOLE HYDROBROMIDE MONOHYDRATE Basic Attributes

275.17

273.97800

DTXSID0024503

29341000

Characteristics

68.2

3.86730

2-amino-4-phenylthiazole hydrobromide monohydrate is a white powder. (NTP, 1992)

180-183 °C(lit.)

363.4ºC at 760mmHg

173.6ºC

less than 1 mg/mL at 72° F (NTP, 1992)

Insoluble in water.

Amines, Phosphines, and Pyridines

Acidic salt of an amine. Materials in this group have variable solubility in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions.

Safety Information

NONH for all modes of transport

3

36/37/38

26-36/37/39

Xi

P261-P305 + P351 + P338

H315-H319-H335

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Computed Properties

Molecular Weight:275.17
Hydrogen Bond Donor Count:3
Hydrogen Bond Acceptor Count:4
Rotatable Bond Count:1
Exact Mass:273.97755
Monoisotopic Mass:273.97755
Topological Polar Surface Area:68.2
Heavy Atom Count:14
Complexity:146
Covalently-Bonded Unit Count:3
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.