Resin acids, aluminum salts
-
Resin acids, aluminum salts
structure -
-
CAS No:
61789-65-9
-
Chemical Name:
Resin acids, aluminum salts
-
Synonyms:
Resin acids,aluminum salts;Resin acids and Rosin acids,aluminum salts;Aluminum resinate;Resin acid aluminum salts;Metal Resinate A 3808;Dimarex Resin;62715-48-4
-
CAS No:
Description
Brown solid. Insoluble in water; soluble in oils.
Aluminum resinate appears as a brown solid. An aluminum salt of mixed resin acids, such as abietic acid and pimaric acid. Insoluble in water and denser than water. Contact irritates skin, eyes, and mucous membranes. May be toxic by ingestion. Use as a drier for varnishes.
Aluminum resinate appears as a brown solid. An aluminum salt of mixed resin acids, such as abietic acid and pimaric acid. Insoluble in water and denser than water. Contact irritates skin, eyes, and mucous membranes. May be toxic by ingestion. Use as a drier for varnishes.
Characteristics
120 Ų
Aluminum resinate appears as a brown solid. An aluminum salt of mixed resin acids, such as abietic acid and pimaric acid. Insoluble in water and denser than water. Contact irritates skin, eyes, and mucous membranes. May be toxic by ingestion. Use as a drier for varnishes.
Highly flammable. The solid will spontaneously heat in the presence of air and moisture; the heat generation may suffice to ignite surrounding combustible materials.
Reducing Agents, Strong
Highly Flammable
ALUMINUM RESINATE reacts with oxidizing agents to generate heat and products that may be flammable, combustible, or otherwise reactive. Reactions with oxidizing agents may be violent.
Safety Information
III
4.1
2715
Excerpt from ERG Guide 133 [Flammable Solids]: Flammable/combustible material. May be ignited by friction, heat, sparks or flames. Some may burn rapidly with flare-burning effect. Powders, dusts, shavings, borings, turnings or cuttings may explode or burn with explosive violence. Substance may be transported in a molten form at a temperature that may be above its flash point. May re-ignite after fire is extinguished. (ERG, 2016)|Flammable - 3rd degree
Excerpt from ERG Guide 133 [Flammable Solids]: SMALL FIRE: Dry chemical, CO2, sand, earth, water spray or regular foam. LARGE FIRE: Water spray, fog or regular foam. Move containers from fire area if you can do it without risk. Fire Involving Metal Pigments or Pastes (e.g. "Aluminum Paste") Aluminum Paste fires should be treated as a combustible metal fire. Use DRY sand, graphite powder, dry sodium chloride-based extinguishers, G-1® or Met-L-X® powder. Also, see ERG Guide 170. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Cool containers with flooding quantities of water until well after fire is out. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)
Excerpt from ERG Guide 133 [Flammable Solids]: As an immediate precautionary measure, isolate spill or leak area for at least 25 meters (75 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 100 meters (330 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 133 [Flammable Solids]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. SMALL DRY SPILL: With clean shovel, place material into clean, dry container and cover loosely; move containers from spill area. LARGE SPILL: Wet down with water and dike for later disposal. Prevent entry into waterways, sewers, basements or confined areas. (ERG, 2016)
Excerpt from ERG Guide 133 [Flammable Solids]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 133 [Flammable Solids]: Fire may produce irritating and/or toxic gases. Contact may cause burns to skin and eyes. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution. (ERG, 2016)
Excerpt from ERG Guide 133 [Flammable Solids]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Removal of solidified molten material from skin requires medical assistance. Keep victim calm and warm. (ERG, 2016)
Resin acids, aluminum salts Use and Manufacturing
Drier for varnishes.
Fire Hazards -> Flammable - 3rd degree
Computed Properties
Molecular Weight:931.3
Hydrogen Bond Acceptor Count:6
Rotatable Bond Count:3
Exact Mass:930.6318039
Monoisotopic Mass:930.6318039
Topological Polar Surface Area:120
Heavy Atom Count:67
Complexity:536
Defined Atom Stereocenter Count:9
Undefined Atom Stereocenter Count:3
Covalently-Bonded Unit Count:4
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
Fatty acids, C18-unsatd., dimers, sodium salts
67701-20-6
-
Naphthenic acids, sodium salts
61790-13-4
-
Naphthenic acids, lead salts
61790-14-5
-
Naphthenic acids, iron salts Formula
1338-14-3
-
Naphthenic acids, zirconium salts Formula
72854-21-8
-
Naphthenic acids, cerium(4+) salts Formula
68514-63-6
-
Fatty acids, tall-oil, cobalt salts Structure
61789-52-4
-
Resin acids, Me esters Structure
68186-14-1
-
What is Resin acids, manganese salts
9008-34-8
-
What is Fatty acids, C16-18, sulfo, 1-Me esters, sodium salts
93348-22-2