Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Tetraethylene glycol diacrylate

Tetraethylene glycol diacrylate

Tetraethylene glycol diacrylate structure

Tetraethylene glycol diacrylate 

structure
  • CAS No:

    17831-71-9

  • Formula:

    C14H22O7

  • Chemical Name:

    Tetraethylene glycol diacrylate

  • Synonyms:

    2-Propenoic acid,1,1′-[oxybis(2,1-ethanediyloxy-2,1-ethanediyl)] ester;Acrylic acid,diester with tetraethylene glycol;2-Propenoic acid,oxybis(2,1-ethanediyloxy-2,1-ethanediyl) ester;Acrylic acid,oxybis(ethyleneoxyethylene) ester;Tetraethylene glycol diacrylate;SR 268;Viscoat 335HP;TEGDA;Aronix M 240;Viscoat 335H;Kayarad R 268;E 4EG2A;Miramer M 270;Epoxy diethylene glycol diacrylate;Viscoat 355HP;V 335HP;SR 268US;M 240;2-[2-[2-(2-Prop-2-enoyloxyethoxy)ethoxy]ethoxy]ethyl prop-2-enoate;62181-21-9;108136-50-1;1789737-02-5

  • Categories:

    Cosmetic Ingredient  >  Plasticiser

Description

Tetraethylene glycol diacrylate is a pale yellow liquid. (NTP, 1992)|Liquid


Tetraethylene glycol diacrylate is a pale yellow liquid. (NTP, 1992)

Tetraethylene glycol diacrylate Basic Attributes

302.32000

302.32

241-789-3

1760

DTXSID2026107

2918990090

Characteristics

80.29000

0.49460

Pale yellow liquid.

1.11

41990ºC

381.5ºC at 760 mmHg

>110ºC

1.465

Insoluble (<1 mg/ml) (NTP, 1992)

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

5.03E-06mmHg at 25°C

Insoluble in water.

Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters

An ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Safety Information

UN 1760

R34

C

This chemical is flammable. (NTP, 1992)

|Danger|H302 (67.74%): Harmful if swallowed [Warning Acute toxicity, oral]|P260, P261, P264, P270, P271, P272, P273, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P330, P332+P313, P333+P313, P337+P313, P362, P363, P391, P403+P233, P405, and P501|Aggregated GHS information provided by 155 companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this compound should be controlled with a dry chemical, carbon dioxide or halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Seal the absorbent paper, as well as any of your clothing which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Wash any surfaces you may have contaminated with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

PEG-4 diacrylate

Tetraethylene glycol diacrylate Use and Manufacturing

Uses

Intermediates


Adhesives and sealants

Adhesive manufacturing|2-Propenoic acid, 1,1'-[oxybis(2,1-ethanediyloxy-2,1-ethanediyl)] ester: ACTIVE

Computed Properties

Molecular Weight:302.32
XLogP3:0.7
Hydrogen Bond Acceptor Count:7
Rotatable Bond Count:16
Exact Mass:302.13655304
Monoisotopic Mass:302.13655304
Topological Polar Surface Area:80.3
Heavy Atom Count:21
Complexity:284
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Tetraethylene glycol diacrylate

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.