Zirconium hydride (ZrH2)
-
Zirconium hydride (ZrH2)
structure -
-
CAS No:
7704-99-6
-
Formula:
H2Zr
-
Chemical Name:
Zirconium hydride (ZrH2)
-
Synonyms:
Zirconium hydride (ZrH2);Zirconium dihydride;Zirconium hydride;452955-88-3
- Categories:
-
CAS No:
Description
Gray-black metallic powder. Stable toward air and water.
Zirconium hydride appears as a grayish black solid. No reaction with water under normal conditions. Easily ignited and burns with an intense flame. Water will increase the intensity of the fire.
Zirconium hydride appears as a grayish black solid. No reaction with water under normal conditions. Easily ignited and burns with an intense flame. Water will increase the intensity of the fire.
Characteristics
Powder
5.6 g/cm3 (20ºC)
1857ºC
no reaction with H2O [MER06]
Highly flammable. Heating in air causes incandescence and mild explosions [Bretherick 1979. p. 980]. Slowly reacts with water to form caustic solution of zirconium hydroxide and hydrogen gas (H2).
Metal Hydrides, Metal Alkyls, Metal Aryls, and Silanes
Highly Flammable
Hydrides, such as ZIRCONIUM HYDRIDE, are reducing agents and react rapidly and dangerously with oxygen and with other oxidizing agents, even weak ones. Thus, they are likely to ignite on contact with alcohols. Hydrides are incompatible with acids, alcohols, amines, and aldehydes. May be ignited by heat, sparks or flames. May re-ignite after fire is extinguished. Some are transported in highly flammable liquids.
Safety Information
II
4.1
UN 1437 4.1/PG 2
3
11-36/37/38
24/25-43-7/8
ZH8015000
F
P210-P261-P305 + P351 + P338
H228-H315-H319-H335
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Produce flammable gases on contact with water. May ignite on contact with water or moist air. Some react vigorously or explosively on contact with water. May be ignited by heat, sparks or flames. May re-ignite after fire is extinguished. Some are transported in highly flammable liquids. Runoff may create fire or explosion hazard. (ERG, 2016)|Flammable - 3rd degree, Reactive - 1st degree
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: DO NOT USE WATER OR FOAM. SMALL FIRE: Dry chemical, soda ash, lime or sand. LARGE FIRE: DRY sand, dry chemical, soda ash or lime or withdraw from area and let fire burn. Move containers from fire area if you can do it without risk. FIRE INVOLVING METALS OR POWDERS (ALUMINUM, LITHIUM, MAGNESIUM, ETC.): Use dry chemical, DRY sand, sodium chloride powder, graphite powder or Met-L-X® powder; in addition, for Lithium you may use Lith-X® powder or copper powder. Also, see ERG Guide 170. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Stop leak if you can do it without risk. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. DO NOT GET WATER on spilled substance or inside containers. SMALL SPILL: Cover with DRY earth, DRY sand or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Dike for later disposal; do not apply water unless directed to do so. POWDER SPILL: Cover powder spill with plastic sheet or tarp to minimize spreading and keep powder dry. DO NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST. (ERG, 2016)
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death. May produce corrosive solutions on contact with water. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control may cause pollution. (ERG, 2016)
Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, wipe from skin immediately; flush skin or eyes with running water for at least 20 minutes. Keep victim calm and warm. (ERG, 2016)
Zirconium hydride (ZrH2) Use and Manufacturing
Powerful reducing agent in acid solution or at high temps; hydrogenation catalyst; in the vacuum tube industry and powder metallurgy.
Fire Hazards -> Flammable - 3rd degree, Reactive - 1st degree
Computed Properties
Molecular Weight:95.26
Hydrogen Bond Acceptor Count:4
Exact Mass:93.935999
Monoisotopic Mass:93.935999
Heavy Atom Count:1
Covalently-Bonded Unit Count:5
Compound Is Canonicalized:Yes
Recommended Suppliers of Zirconium hydride (ZrH2)
-
CN
5 YRS
Business licensedTrader Supplier of chromium salts,lithium salts -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 7704-99-6Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
Bismuth zirconium oxide (Bi2Zr3O9)
12048-52-1
-
Cerium zirconium oxide (Ce2Zr2O7)
12157-80-1
-
Gallium hydride (GaH3)
13572-93-5
-
Polonium hydride (PoH2) Formula
31060-73-8
-
Bismuth zirconium oxide (Bi2ZrO5) Formula
53125-66-9
-
Samarium hydride (SmH3) Formula
13598-53-3
-
Praseodymium hydride (PrH3) Structure
13864-03-4
-
Rubidium hydride (RbH) Structure
13446-75-8
-
What is Aluminum Zirconium Trichlorohydrex Gly
134375-99-8
-
What is Cesium hydride (CsH)
13772-47-9