Butylurea
-
Butylurea
structure -
-
CAS No:
592-31-4
-
Formula:
C5H12N2O
-
Chemical Name:
Butylurea
-
Synonyms:
Urea,N-butyl-;Urea,butyl-;N-Butylurea;Butylurea;1-Butylurea;NSC 2597
- Categories:
-
CAS No:
Description
WHITE TO ALMOST WHITE CRYSTALLINE POWDER
N-butylurea is an odorless white solid. (NTP, 1992)
N-butylurea is an odorless white solid. (NTP, 1992)
Butylurea Basic Attributes
116.16
116.16
1744775
209-748-4
9CPL5NR15K
2597
DTXSID6020222
TABLETS FROM WATER; NEEDLES FROM BENZENE|WHITE SOLID
2924199090
Characteristics
55.1
1.54600
N-butylurea is an odorless white solid. (NTP, 1992)
0.962 g/cm3
96 °C
179.4ºC at 760 mmHg
62.3ºC
1.449
H2O: soluble ;SOL IN ETHER
Keep containers tightly closed. Store in a cool, dry area away from incompatible substances.
Oral-rat LD50: 1255 mg/kg; Abdominal cavity-mouse LD50: 1285 mg/kg
Thermal decomposition to emit toxic nitrogen oxide fumes
ODORLESS
DECOMPOSES ON HEATING
Water soluble.
Amides and Imides
N-BUTYLUREA is an amide. Amides/imides react with azo and diazo compounds to generate toxic gases. Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx). This compound decomposes on heating. (NTP, 1992)
Safety Information
NONH for all modes of transport
3
22-68-37-20/21/22
45-36/37-36
YS3675000
Xn
Warehouse ventilated, low temperature and dry
Stable under normal temperatures and pressures. Decomposes when heated.
P264, P270, P301+P312, P330, P501
H302
Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)
|Warning|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P301+P312, P330, and P501|Aggregated GHS information provided by 77 companies from 3 notifications to the ECHA C&L Inventory.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Toxicity
moderately toxic
SUBSEDATIVE IP DOSE OF BUTYLUREA POTENTIATED BARBITURATE SLEEPING TIME IN MICE, AN EFFECT WHICH WAS PROLONGED BY SKF-525A. BUTYLUREA PROTECTED MICE AGAINST STRYCHNINE LETHALITY, BUT NOT CONVULSIONS, & PENTETRAZOLE CONVULSIONS BUT NOT LETHALITY.
Drug Information
ACUTE/CHRONIC HAZARDS: This compound emits toxic fumes when heated to decomposition. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
butylurea
Computed Properties
Molecular Weight:116.16
XLogP3:0.4
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:3
Exact Mass:116.094963011
Monoisotopic Mass:116.094963011
Topological Polar Surface Area:55.1
Heavy Atom Count:8
Complexity:72.8
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Butylurea
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
4 YRS
Business licensedTrader Supplier of 2,3-Dimethylbutane,Nucleating agent,metal Sodium
Learn More Other Chemicals
-
2-Bromophenacyl bromide, 90%
49851-55-0
-
1H-Indazol-7-ol
81382-46-9
-
6-Chloro-4-forMyl-nicotinic acid
1031433-06-3
-
3-Hydroxy-2,4,5-trifluorobenzoic acid Formula
116751-24-7
-
2-Methyl-1-heptene Formula
15870-10-7
-
1-(3,5-Dinitrophenyl)ethanone Formula
14401-75-3
-
α-Amino-3-bromobenzeneacetic acid Structure
79422-73-4
-
6-(BROMOMETHYL)-1,3-BENZOTHIAZOLE,97% Structure
499770-85-3
-
What is ethyl 5-hydroxy-2-Methylnicotinate
60390-47-8
-
What is 2-bromo-1-(4-bromo-3-fluorophenyl)ethanone
1003879-02-4