Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Nafenopin

Nafenopin

Nafenopin structure

Nafenopin 

structure
  • CAS No:

    3771-19-5

  • Formula:

    C20H22O3

  • Chemical Name:

    Nafenopin

  • Synonyms:

    Propanoic acid,2-methyl-2-[4-(1,2,3,4-tetrahydro-1-naphthalenyl)phenoxy]-;Propionic acid,2-methyl-2-[p-(1,2,3,4-tetrahydro-1-naphthyl)phenoxy]-;2-Methyl-2-[4-(1,2,3,4-tetrahydro-1-naphthalenyl)phenoxy]propanoic acid;Su 13437;2-Methyl-2-[p-(1,2,3,4-tetrahydro-1-naphthyl)phenoxy]propionate;2-Methyl-2-[p-(1,2,3,4-tetrahydro-1-naphthyl)phenoxy]propionic acid;Nafenopin;CIBA 13437Su;CIBA 13,437SU;CH 13-437;SU 13.437;2-Methyl-2-[4-(1,2,3,4-tetrahydro-1-naphthyl)phenoxy]propionic acid;C 13437Su;Melipan;TPIA;32147-35-6

  • Categories:

    Active Pharmaceutical Ingredients  >  Circulatory System Drugs

Description

ChEBI: A monocarboxylic acid that is 2-hydroxy-2-methylpropanoic acid in which ther tertiary hydroxy group has been converted to the corresponding p-(1,2,3,4-tetrahydronaphthalen-1-yl)phenyl ether.


Crystals. (NTP, 1992)


Crystals. (NTP, 1992)|2-methyl-2-[4-(1,2,3,4-tetrahydronaphthalen-1-yl)phenoxy]propanoic acid is a monocarboxylic acid that is 2-hydroxy-2-methylpropanoic acid in which ther tertiary hydroxy group has been converted into the corresponding p-(1,2,3,4-tetrahydronaphthalen-1-yl)phenyl ether. It is an aromatic ether and a monocarboxylic acid.|A peroxisome proliferator that is used experimentally to promote liver tumors. It has been used as an antihyperlipoproteinemic agent.

Nafenopin Basic Attributes

310.391

310.39

DTXSID8020911

2918990090

Characteristics

46.5

4.9

Crystals. (NTP, 1992)

1.155g/cm3

117-118 °C

466.4°C at 760 mmHg

164.4ºC

1.581

No rapid reaction with air. No rapid reaction with water.

Acids, Carboxylic

An organic acid. Carboxylic acids donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible.

Safety Information

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)

Drug Information

Substances that lower the levels of certain LIPIDS in the BLOOD. They are used to treat HYPERLIPIDEMIAS. (See all compounds classified as Hypolipidemic Agents.)|A class of nongenotoxic CARCINOGENS that induce the production of hepatic PEROXISOMES and induce hepatic neoplasms after long-term administration. (See all compounds classified as Peroxisome Proliferators.)

SYMPTOMS: Symptoms of exposure to this chemical include a decrease of serum triglycerides. ACUTE/CHRONIC HAZARDS: There is sufficient evidence that this chemical is an animal carcinogen, and limited evidence that it is a human carcinogen. When heated to decomposition, this chemical emits acrid smoke. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)

Acid, Nafenoic

Computed Properties

Molecular Weight:310.4
XLogP3:4.9
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:4
Exact Mass:310.15689456
Monoisotopic Mass:310.15689456
Topological Polar Surface Area:46.5
Heavy Atom Count:23
Complexity:409
Undefined Atom Stereocenter Count:1
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.