Triethylamine, hydrochloride
-
Triethylamine, hydrochloride
structure -
-
CAS No:
554-68-7
-
Formula:
C6H15N.ClH
-
Chemical Name:
Triethylamine, hydrochloride
-
Synonyms:
Ethanamine,N,N-diethyl-,hydrochloride (1:1);Triethylamine,hydrochloride;Ethanamine,N,N-diethyl-,hydrochloride;Triethylamine monohydrochloride;Triethylammonium chloride;N,N-Diethylethanamine hydrochloride
- Categories:
-
CAS No:
Triethylamine, hydrochloride Basic Attributes
137.65
137.097122
3906409
209-067-2
0NX3818GCW
30600
DTXSID8060292
Crystals from alcohol|Hexagonal crsystals from alcohol
29211910
Characteristics
3.2
2.15010
White to off-white Crystalline Powder
1.0689 g/cm3 @ Temp: 21 °C
260 °C (decomp)
<245 °C
1.4136 (20ºC)
H2O: 1440 g/L (20 ºC)
Store below +30°C.
LDLo scu-mus: 600 mg/kg JPETAB 37,309,29
Safety Information
II
NONH for all modes of transport
1
36/37/38-20/21/22
26-36-36/37/39-22
YE2111500
Xi,Xn
Stable under recommended storage conditions.
P261-P305 + P351 + P338
H315-H319-H335
SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.|Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material; Contaminated packaging: Dispose of as unused product.
Incompatible materials: Strong oxidizing agents.
|Warning|H315 (90%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 183 companies from 10 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H315: Causes skin irritation [Warning Skin corrosion/irritation]
Eye/face protection: Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).|Skin protection: Handle with gloves.|Body Protection: Impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.|Respiratory protection: For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.|Wear self contained breathing apparatus for fire fighting if necessary.
ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains. Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains.|Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection.|Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.|Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.|SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.
No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./
Toxicity
IDENTIFICATION AND USE: Triethylamine hydrochloride forms hexagonal crystals. It used in preparation of quaternary ammonium compounds. HUMAN EXPOSURE AND TOXICITY: There is no data available. ANIMAL STUDIES: The hemolytic actions of some short-chain alkylamine hydrochlorides were studied. Tertiary salts such as triethylamine hydrochloride produced incomplete hemolysis of dog erythrocytes in vitro, whereas primary salts produced complete hemolysis.
Increases in antibacterial and antifungal properties in vitro, due to the triethylammonium chloride complexation of N-substituted N'-cyano-O-(triphenylstannyl)isoureas, are discussed.
Drug Information
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Organic bases/amines and related compounds/|Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patent can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . Cover skin burns with dry sterile dressings after decontamination ... . /Organic bases/amines and related compounds/|Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W TKO /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. If patient is unresponsive to these measures, vasopressors may be helpful. Watch for signs of fluid overload ... . Administer 1% solution methylene blue if patient is symptomatic with severe hypoxia, cyanosis, and cardiac compromise not responding to oxygen. ... . Treat seizures with diazepam (Valium) or lorazepam (Ativan) ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Organic bases/amines and related compounds/
triethylamine
Triethylamine, hydrochloride Use and Manufacturing
Used as basic raw materials for quaternary ammonium salts, medicines, pesticides, dyes and other organic synthesis; manufacturing quaternary ammonium compounds. Organic Synthesis. Triethylamine hydrochloride is mainly used in organic synthesis and the preparation of fourth amine compounds.
Ethanamine, N,N-diethyl-, hydrochloride (1:1): ACTIVE|By using trimethylamine hydrochloride and triethylamine hydrochloride, it was determined that the stimulant action of nicotine in the brain paralleled the nicotine effect in the ganglia of rabbits.
The value of capillary electrophoresis (CE) and combined capillary electrophoresis-electrospray mass spectrometry (CE-ES-MS) for the analysis of simple quaternary ammonium ions, including herbicides, has been assessed. Choline, chlormequat, known contaminants of their formulation products, and some other small ammonium cations have been examined. Lacking a chromophore, the cations were detected by inverse UV absorption utilizing a buffer containing creatinine as visualization agent. In this way, all six cations could be resolved, detected and quantified within 8 min. To confirm the identities of the ammonium ions, coupled ES-MS provided mass measurement on all migrating cations. The triaxial probe proved to be an efficient interface for examining the small cations (m/z 60-124) by CE-ES-MS. Results on three formulation products containing chlormequat have been obtained by CE and CE-ES-MS, and compared with quantitative data from analysis by ion chromatography.
Computed Properties
Molecular Weight:137.65
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:3
Exact Mass:137.0971272
Monoisotopic Mass:137.0971272
Topological Polar Surface Area:3.2
Heavy Atom Count:8
Complexity:25.7
Covalently-Bonded Unit Count:2
Compound Is Canonicalized:Yes
Price Analysis
- Data: 2026-01-02
- Price: 13000.00Yuan/ton
- Change: 0
Recommended Suppliers of Triethylamine, hydrochloride
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst,Chemical Materials,Chem&Pharm Intermediates,Organic Intermediates,Feed AdditiveInquiryCAS No.: 554-68-7Grade: Industrial GradeContent: 99% -
CN
2 YRS
Business licensedTrader Supplier of API,Antibiotics,Anti cancer categoryInquiryUnit Price: $50 /MT EXWCAS No.: 554-68-7Grade: Analytical ReagentContent: 99% -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals -
CN
3 YRS
Business licensedTrader Supplier of api,Intermediates,Organic Chemistry,Inorganic Chemistry,Daily Chemicals,Cosmetic Raw Materals,CATALYST AND AUXILIARY,FLAVORS AND FRAGRANCES,Chemical Pesticides,ADDITIVE
Learn More Other Chemicals
-
4H-1-Benzopyran-4-one, 2-[4-[3-(dibutylamino)propoxy]-3,5-dimethylbenzoyl]-, hydrochloride (1:1)
67652-33-9
-
Cyclopropanecarboxylic acid, 1-amino-2-ethenyl-, ethyl ester, hydrochloride (9CI)
681807-60-3
-
CYCLOPENTYL-(3,4,5-TRIMETHOXY-BENZYL)-AMINE HYDROCHLORIDE
1052525-88-8
-
2-Cyclopropylbenzenemethanamine hydrochloride Formula
118184-64-8
-
Des[4-(2-cycloproylMethoxy)] Betaxolol Hydrochloride Formula
464877-45-0
-
Ethanamine, 2-(decylthio)-, hydrochloride (1:1) Formula
36362-09-1
-
4,7-Dichloro-2-propylquinoline hydrochloride Structure
1204812-22-5
-
6,7-Dichloro-4-hydrazino-2-methylquinoline hydrochloride Structure
1170377-12-4
-
What is 2,8-Diazaspiro[4.5]decan-1-one, 2-[(4-bromophenyl)methyl]-, hydrochloride (1:1)
832710-56-2
-
What is 6,7-Dichloro-4-hydrazinoquinoline hydrochloride
1171843-02-9