Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid

2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid

2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid structure

2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid 

structure
  • CAS No:

    130-17-6

  • Formula:

    C14H12N2O3S2

  • Chemical Name:

    2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid

  • Synonyms:

    7-Benzothiazolesulfonic acid,2-(4-aminophenyl)-6-methyl-;7-Benzothiazolesulfonic acid,2-(p-aminophenyl)-6-methyl-;2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid;2-(p-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid;Dehydrothio-p-toluidinesulfonic acid;p-(6-Methyl-7-sulfobenzothiazole)aniline;2-(4′-Aminophenyl)-6-methylbenzothiazole-7-sulfonic acid;NSC 203387;NSC 44566;2-(4-Aminophenyl)-6-methylbenzothiazolesulfonic acid;2-(4-Aminophenyl)-6-methylbenzothiazole-7-sulphonic acid;2-(4-Aminophenyl)-6-methyl-1,3-benzothiazole-7-sulfonic acid

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

Description

PHYSICAL DESCRIPTION: Brownish-yellow powder. (NTP, 1992)


2-(4-aminophenyl)-6-methylbenzothiazole sulfonic acid is a brownish-yellow powder. (NTP, 1992)|WetSolid


2-(4-aminophenyl)-6-methylbenzothiazole sulfonic acid is a brownish-yellow powder. (NTP, 1992)

2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid Basic Attributes

320.39

320.39

204-979-7

3ZPZ8EA7RK

203387

2811

DTXSID0024501

2934999090

Characteristics

129.90000

4.76260

2-(4-aminophenyl)-6-methylbenzothiazole sulfonic acid is a brownish-yellow powder. (NTP, 1992)

1.505 g/cm3

319 °C

1.714

H2O: <0.1 g/100 mL at 22 ºC

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Intravenous-Mouse LD50: 178 mg/kg

Flammable; burning produces toxic nitrogen oxides and sulfur oxide fumes

Insoluble in water.

Amines, Phosphines, and Pyridines

Safety Information

2811

20/21/22-36/37/38

26-36/37/39

Xn,C

Warehouse ventilated, low temperature and dry

Corrosive

P264, P270, P273, P301+P312, P330, P501

H302

Flash point data for this compound are not available; however, it is probably combustible. (NTP, 1992)

|Warning|H302 (29.32%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P273, P301+P312, P330, and P501|Aggregated GHS information provided by 134 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Toxicity

highly toxic

Drug Information

ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound may emit very toxic fumes of SOx and NOx. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

2-(4-Aminophenyl)-6-methyl-7-benzothiazolesulfonic acid Use and Manufacturing

Uses

It is an important intermediate for synthetic paper dyes.


Intermediates

Synthetic dye and pigment manufacturing|7-Benzothiazolesulfonic acid, 2-(4-aminophenyl)-6-methyl-: ACTIVE

Computed Properties

Molecular Weight:320.4
XLogP3:2.5
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:6
Rotatable Bond Count:2
Exact Mass:320.02893460
Monoisotopic Mass:320.02893460
Topological Polar Surface Area:130
Heavy Atom Count:21
Complexity:471
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.