2-Hydroxypropyl acrylate Safety Data Sheets
SAFETY DATA SHEETS
According to the UN GHS revision 8
SECTION 1: Identification
1.1 GHS Product identifier
| Product name | 2-hydroxypropyl acrylate |
|---|
1.2 Other means of identification
| Product number | - |
|---|---|
| Other names | 2-HYDROXYPROPYL ACRYLATE; 2-Propenoic acid, 2-hydroxypropyl ester |
1.3 Recommended use of the chemical and restrictions on use
| Identified uses | Industrial and scientific research uses. |
|---|---|
| Uses advised against | no data available |
1.4 Supplier's details
| Company | Echemi.com |
|---|---|
| Address | Echemi.com |
| Telephone | Echemi.com |
1.5 Emergency phone number
| Emergency phone number | Echemi.com |
|---|---|
| Service hours | Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours). |
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
Acute toxicity - Category 3, Oral
Acute toxicity - Category 3, Dermal
Skin corrosion, Sub-category 1B
Skin sensitization, Category 1
Acute toxicity - Category 3, Inhalation
2.2 GHS label elements, including precautionary statements
| Pictogram(s) | |
|---|---|
| Signal word | Danger |
| Hazard statement(s) | H301 Toxic if swallowed H311 Toxic in contact with skin H314 Causes severe skin burns and eye damage H317 May cause an allergic skin reaction H331 Toxic if inhaled |
| Precautionary statement(s) | |
| Prevention | P264 Wash ... thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... P260 Do not breathe dust/fume/gas/mist/vapours/spray. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P271 Use only outdoors or in a well-ventilated area. |
| Response | P301+P316 IF SWALLOWED: Get emergency medical help immediately. P321 Specific treatment (see ... on this label). P330 Rinse mouth. P302+P352 IF ON SKIN: Wash with plenty of water/... P316 Get emergency medical help immediately. P361+P364 Take off immediately all contaminated clothing and wash it before reuse. P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P363 Wash contaminated clothing before reuse. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P317 If skin irritation or rash occurs: Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. |
| Storage | P405 Store locked up. P403+P233 Store in a well-ventilated place. Keep container tightly closed. |
| Disposal | P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. |
2.3 Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
3.1 Substances
| Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
|---|---|---|---|---|
| 2-hydroxypropyl acrylate | 2-hydroxypropyl acrylate | 999-61-1 | 213-663-8 | 100% |
SECTION 4: First-aid measures
4.1 Description of necessary first-aid measures
If inhaled
Fresh air, rest. Half-upright position. Refer immediately for medical attention.
Following skin contact
Remove contaminated clothes. Rinse skin with plenty of water or shower for at least 15 minutes. Refer immediately for medical attention.
Following eye contact
Rinse with plenty of water (remove contact lenses if easily possible). Refer immediately for medical attention.
Following ingestion
Rinse mouth. Do NOT induce vomiting. Refer immediately for medical attention.
4.2 Most important symptoms/effects, acute and delayed
no data available
4.3 Indication of immediate medical attention and special treatment needed, if necessary
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Poisons A and B
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
Extinguishing methods: Alcohol foam
5.2 Specific hazards arising from the chemical
Combustible. Gives off irritating or toxic fumes (or gases) in a fire. Above 65°C explosive vapour/air mixtures may be formed.
5.3 Special protective actions for fire-fighters
Use water spray, dry powder, alcohol-resistant foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal protection: complete protective clothing including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
6.2 Environmental precautions
Personal protection: complete protective clothing including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
6.3 Methods and materials for containment and cleaning up
ACCIDENTAL RELEASE MEASURES. Cover with dry-lime, sand, or soda ash. Place in covered containers using non-sparking tools and transport outdoors. Ventilate area and wash spill site after material pickup is complete.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
NO open flames. Above 65°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
7.2 Conditions for safe storage, including any incompatibilities
Separated from food and feedstuffs. Cool. Keep in the dark. Store only if stabilized. See Notes. Provision to contain effluent from fire extinguishing. Store in an area without drain or sewer access.Keep tightly closed.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure limit values
TLV: 0.5 ppm as TWA; (skin); (SEN)
Biological limit values
no data available
8.2 Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Wear face shield or eye protection in combination with breathing protection.
Skin protection
Protective gloves. Protective clothing.
Respiratory protection
Use ventilation, local exhaust or breathing protection.
Thermal hazards
no data available
SECTION 9: Physical and chemical properties and safety characteristics
| Physical state | COLOURLESS LIQUID. |
|---|---|
| Colour | Colorless liquid |
| Odour | Faint unpleasant odor |
| Melting point/freezing point | Freezing point: -30 deg C |
| Boiling point or initial boiling point and boiling range | 77ºC 5mm |
| Flammability | Class IIIA Combustible Liquid: Fl.P. at or above 140°F and below 200°F. |
| Lower and upper explosion limit/flammability limit | Lower 1.4 at 212 deg F (100 deg C) |
| Flash point | 79.9ºC |
| Auto-ignition temperature | no data available |
| Decomposition temperature | no data available |
| pH | no data available |
| Kinematic viscosity | 8.2 mm²/s at 20°C |
| Solubility | Miscible with water and oxygenated solvents |
| Partition coefficient n-octanol/water | log Kow = 0.35 |
| Vapour pressure | 0.17 mm Hg at 25 deg C (est) |
| Density and/or relative density | 1.049 g/cm3 |
| Relative vapour density | 4.5 (Air = 1) |
| Particle characteristics | no data available |
SECTION 10: Stability and reactivity
10.1 Reactivity
The substance may polymerize due to heating and under the influence of light, and peroxides. Decomposes on heating. This produces toxic and corrosive fumes including acrolein. Reacts violently with strong acids, strong bases, strong oxidants and peroxides. This generates fire hazard.
The substance may polymerize due to heating and under the influence of light, and peroxides. Decomposes on heating. This produces toxic and corrosive fumes including acrolein. Reacts violently with strong acids, strong bases, strong oxidants and peroxides. This generates fire hazard.
10.2 Chemical stability
no data available
10.3 Possibility of hazardous reactions
No data.The substance may polymerize due to heating and under the influence of light, and peroxides. Decomposes on heating. This produces toxic and corrosive fumes including acrolein. Reacts violently with strong acids, strong bases, strong oxidants and peroxides. This generates fire hazard.
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
Water [Note: Can become unstable at high temperatures & pressures or may react with water with some release of energy, but not violently.]
10.6 Hazardous decomposition products
When heated to decomposition it emits acrid smoke and fumes.
SECTION 11: Toxicological information
Acute toxicity
- Oral: LD50 Rat oral 250 mg/kg
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is corrosive to the eyes, skin and respiratory tract. Corrosive on ingestion. Inhalation may cause lung oedema, but only after initial corrosive effects on eyes and/or airways have become manifest. If swallowed the substance may cause vomiting and could result in aspiration pneumonitis. See Notes.
STOT-repeated exposure
Repeated or prolonged contact with skin may cause dermatitis. Repeated or prolonged contact may cause skin sensitization. See Notes.
Aspiration hazard
A harmful contamination of the air will be reached rather slowly on evaporation of this substance at 20°C.
SECTION 12: Ecological information
12.1 Toxicity
- Toxicity to fish: LC50; Species: Pimephales promelas (Fathead minnow, juvenile age 28-34 days, weight 0.134 g, length 20.9 mm); Conditions: freshwater, flow through, hardness 45.3 mg/L CaCO3, alkalinity 47.0 mg/L CaCO3; Concentration: 3100 ug/L for 96 hr />97% purity
- Toxicity to daphnia and other aquatic invertebrates: EC50; Species: Daphnia magna; Conditions: static; Concentration: 24 mg/L for 48 hr; Effect: immobilization
- Toxicity to algae: EC50; Species: Pseudokirchneriella subcapitata; Conditions: static; Concentration: 3.53 mg/L for 96 hr; Effect: biomass
- Toxicity to microorganisms: no data available
12.2 Persistence and degradability
AEROBIC: Biodegradation data specific to 2-hydroxypropyl acrylate were not located; however, results from two ready biodegradation studies are available for the commercial hydroxypropyl acrylate isomer mixture which contains approximately 70-80% 2-hydroxypropyl acrylate and 20-30% 1-methyl-2-hydroxyethyl acrylate(1,2). Hydroxypropyl acrylate, present at 100 mg/L, reached 83% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(1,2). Hydroypropyl acrylate, present at 3 mg/L, reached 34.9% of its theoretical BOD after 4 weeks using a domestic activated sludge inoculum in the closed bottle test for ready biodegradability(1).
12.3 Bioaccumulative potential
An estimated BCF of 3.2 was calculated in fish for 2-hydroxypropyl acrylate(SRC), using a log Kow of 0.35(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
12.4 Mobility in soil
The Koc of 2-hydroxypropyl acrylate is estimated as 4.4(SRC), using a log Kow of 0.35(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 2-hydroxypropyl acrylate is expected to have very high mobility in soil.
12.5 Other adverse effects
no data available
SECTION 13: Disposal considerations
13.1 Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
14.1 UN Number
| ADR/RID: UN2927 (For reference only, please check.) | IMDG: UN2927 (For reference only, please check.) | IATA: UN2927 (For reference only, please check.) |
14.2 UN Proper Shipping Name
| ADR/RID: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.) | IMDG: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.) | IATA: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.) |
14.3 Transport hazard class(es)
| ADR/RID: 6.1 (For reference only, please check.) | IMDG: 6.1 (For reference only, please check.) | IATA: 6.1 (For reference only, please check.) |
14.4 Packing group, if applicable
| ADR/RID: I (For reference only, please check.) | IMDG: I (For reference only, please check.) | IATA: I (For reference only, please check.) |
14.5 Environmental hazards
| ADR/RID: No | IMDG: No | IATA: No |
14.6 Special precautions for user
no data available
14.7 Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
| Chemical name | Common names and synonyms | CAS number | EC number |
|---|---|---|---|
| 2-hydroxypropyl acrylate | 2-hydroxypropyl acrylate | 999-61-1 | 213-663-8 |
| European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
| EC Inventory | Listed. | ||
| United States Toxic Substances Control Act (TSCA) Inventory | Not Listed. | ||
| China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
| New Zealand Inventory of Chemicals (NZIoC) | Listed. | ||
| Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Listed. | ||
| Vietnam National Chemical Inventory | Listed. | ||
| Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Listed. | ||
| Korea Existing Chemicals List (KECL) | Listed. | ||
SECTION 16: Other information
Information on revision
| Creation Date | July 15, 2019 |
|---|---|
| Revision Date | July 15, 2019 |
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Do NOT take working clothes home.Skin cross-sensitization with other acrylates is possible.An added stabilizer or inhibitor can influence the toxicological properties of this substance; consult an expert.The effectiveness of phenolic inhibitors is dependent on the presence of oxygen. Store under air rather than inert atmosphere.See ICSC 1742.
Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.
2-Hydroxypropyl acrylate is included in Film Forming category.
Related Products
Industry News
More Safety Data Sheets