Product
Supplier
Encyclopedia
Inquiry
Home > News > Price Trends > ABS Prices Rise Then Fall in Early November Amid Declining Raw Material Costs

ABS Prices Rise Then Fall in Early November Amid Declining Raw Material Costs

ECHEMI 2026-11-11

November 10 report

In early November, the Chinese ABS market saw an initial rise followed by a decline, with spot prices for all grades experiencing a certain degree of price decrease. According to Spotcom data, as of November 10, the average price of ABS sample products was 11,816.67 CNY/ton, representing an 8.04% decline from the beginning of the month.

Fundamental Analysis

Supply Level: Entering November, the plant load in China's ABS industry showed a narrow fluctuation, with the overall operating rate slightly increasing, but still not exceeding 56%. The current weekly production is 120,000 tons. Finished goods inventory has slightly increased to above 190,000 tons, but it remains at a relatively low level. During this period, the shipment situation of polymer plants was acceptable, and profitability was average. In the near future, the reduction in load by polymer plants will be limited. Overall, the supply side of ABS provided moderate support to the spot price in early November.

Cost Factors: The Democratic Party’s victory in the midterm elections earlier this month has exerted some downward pressure on geopolitical risks. Coupled with last month’s escalation of Middle East tensions—episodes such as oil tankers catching fire in the Strait of Hormuz driving oil prices to elevated levels—the current sharp decline reflects a pullback from those peak levels.

As a result, propylene nitrile also gradually shifted from strong upward momentum at the beginning of the month. Upstream propylene prices retraced amid volatility, with expectations remaining tilted to the downside going forward. Coupled with relatively ample propylene nitrile supply and persistently lackluster terminal demand, bearish sentiment took hold, pushing spot prices lower. On the other hand, production losses in the propylene nitrile sector persist; it cannot be ruled out that some plants will implement output cuts, which could help cap further price declines.

Since early November, styrene in China has experienced a significant decline. The price of raw material benzene has plummeted, and there is an expectation of increased supply in the future. Although the overall supply of styrene remains tight, downstream acceptance of the price is insufficient. It is expected that the styrene market will consolidate after the decline in the short term.

Although butadiene in November was similarly affected by the synchronized decline in commodity prices led by crude oil, its price action remained largely range-bound. Recently, China Lihua Yi and Shandong Haijiang have both reduced operating loads, with tightening supply providing support to the spot price. At the same time, as prices corrected to a more appropriate range, some rigid downstream demand was released, boosting spot transaction activity. However, the main weakness on the demand side is the lack of sustained restocking momentum and limited willingness to absorb higher prices.

Demand Side: In early November, operating rates among downstream ABS producers remained largely unchanged. Profitability in the key end-use appliance sector improved only marginally, and the impact of the Double 11 shopping festival on finished‑goods absorption remains to be seen. Buyers are reluctant to purchase at higher price levels, opting instead for spot buying to replenish inventories as needed. Traders are adopting a cautious, speculative stance toward bottom‑fishing, and their subsequent actions warrant close monitoring. Overall, demand in early November was primarily driven by essential, rigid‑use requirements.

Outlook

In early November, the ABS market in China rose and then fell. During this period, two of the three raw materials were adjusted, while one suffered a significant decline, weakening the cost support. The production load of polymer plants remained relatively stable, with low inventory levels. Consumer demand was average, and there was no improvement in unit profitability. The main driver of the previous upward trend was the slowdown in the supply of distant raw materials. Traders offered discounts to move inventory, and prices may continue to decrease in the future.

Related Products

Disclaimer: ECHEMI reserves the right of final explanation and revision for all the information.
Comment
Comment

Trade Alert

Delivering the latest product trends and industry news straight to your inbox.
(We'll never share your email address with a third-party.)

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.