Fluorine resin long-acting anticorrosive paint

Product composition:

Super long-term anti-corrosion coatings by fluorine resin containing hydroxy fluorocarbon resin (hereinafter referred to as fluorine resin) amino resin, weather resistance, corrosion resistant fillers, isocyanate resin (biuret) and organic solvent composition of crosslinked type two-component coating.

Product features:

Fluororesin super long - acting anticorrosive coating coating thin, high hardness, high gloss, super - resistant, anti - salt mist, acid and alkali resistant (hydrofluoric acid, nitric acid, etc.). The corrosion-resistant property of glass reinforced plastic coating is equivalent to granite, which is the king of anticorrosive paint. In addition, the coating also has surface anti-fouling, self-cleaning function.

Product use:

Power transmission line equipment, towers, transformers, ships, Bridges and coastal facilities; The inner wall of acid and alkali salt storage tank of chemical enterprise; Outdoor decorative and corrosive equipment; Exterior walls, billboards and other anti-corrosion decorations.

Instructions:

Coating method: spraying, hand brush painting, rolling

Before coating: outdoor weather resistance anticorrosive coating, epoxy, inorganic zinc, polyurethane, chlorinated rubber, fluorine resin heavy-duty anti-corrosive primer, acid and alkali storage tank, chemical industry, coating, fluorine resin primer.

Coating number: decorative and anticorrosive coating on the second surface, second floor, dry film thickness not less than 100 micron; The dry film thickness is not less than 150 micron.

Coating intervals: 23 + 2 ℃, the shortest 3 hours, the longest 48 hours

Technical indicators:

Appearance: primer: iron red, light, flat and half light; Topcoat: colorful, smooth and light

Diluent: special diluent for fluorine resin coating

Ratio: part a (hydroxyl fluoride resin paint) : group b (isocyanate) =10:1

Shelf life: 23 + 2 ℃, 6 hours or less

Maturation period: 23 + 2 ℃ : 20 minutes

Drying time: 23 + 2 ℃ : table dry for 1 hour or less, work 24 hours or less

Theoretical dosage: primer: 110g/m2; Surface paint: 100g/m2

Packing specifications:

Iron drums: 20L 22kg;

Part b: 4L 2.2kg

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 12 months. After that, it should be checked and used.

Notes:

Safety: the construction site should have good ventilation condition, prevent solvent gas and spray paint mist inhalation.

Note: products should be kept away from heat source. Smoking should be strictly prohibited in construction site. This manual is prepared according to the knowledge and experience gained in our laboratory and construction practice, but the coating construction process is usually outside the control of our company.