Water-based epoxy cloud iron intermediate paint

Advantages of water-based epoxy cloud iron intermediate paint product:

1. Water as the diluent, non-toxic, tasteless, pollution-free, non-flammable.

2. Quick drying and good construction performance.

3. Parallel arrangement of mica oxide in the paint film, excellent anticorrosion, filling and high closure.

4. Good water resistance and good corrosion resistance.

5. The film is tough, resistant to impact and good abrasion resistance.

6. Good compatibility with topcoat.

Product parameters:

The color is reddish-brown or gray.

Adhesion class (grid method) 0-1.

The paint film is smooth and smooth.

The container is evenly distributed.

Mixture ratio main agent: curing agent = 10:1.

The outflow time S (cup 4) is greater than 120S.

Impact resistance, ㎝ 50 kg or more. The cm

P H hardness

Bending test is less than 1mm.

The solid content of 60 or more

Table dry (23 + 2 ℃) for 2 h

Work (23 + 2 ℃) for 24 h

Curing time (23 + 2 ℃)

10-15 min

To apply (23 + 2 ℃)

2 to 3 h

Dilute or deionized water.

Coating interval of 10 ℃ : shortest 8 h; 25 ℃, the shortest 3 h; Maximum limit

Application:

Petrochemical pipelines, pipe racks, storage tanks, mechanical equipment, Bridges, steel structures, containers, gas cabinets.

Construction requirements:

1. Strict inspection on the surface cleanliness of the primer.

2. The two components of the paint shall be mixed evenly according to the matching standard, and the construction shall be set for 15min, and the water shall be mixed with 10% to 15%.

3. Apply the paint strictly according to the proportion and finish it during the probation period so as not to waste the gel.

4, during construction and fidgety, environment temperature above 10 ℃, the best relative humidity < 80%, the substrate temperature should be 3 ℃ above the dew point, and good ventilation. Avoid outdoor construction at night, especially when there is condensation or rain.

5. Since the water-based coating is easy to flow from the sharp edges, the "side-angle effect" should be used to protect the corner from corrosion, so it needs to be smoothed out and pre-painted.

6. The durability of water-based paint depends on good construction on a large length. For example, in sharp edges, rivets and jump welding construction needs to be careful, avoid each paint film too thick. It's best to do the extra work.

7. It is strictly prohibited to mix with other coatings and organic solvents.

8. After the construction is finished, the appliance should be rinsed immediately with clean water to prevent dry fixation and the remaining paint shall be sealed and kept.

9, store in cool, dry environment between 5 to 40 ℃, shall not be exposed to frost environment. Avoid direct sunlight and keep the container tightly sealed in well-ventilated areas. It should be separated from strong acid, strong alkali, strong oxidizer, food and animal feed.