99.50% Bio-n-Butyl methacrylate, NBMA,97-88-1,acrylate monomers, Biological Methacrylate Factory
3 Inquiries
97-88-1
Industrial Grade
99.5%
Shanghai
Honour
200KG/Drum
2023-02-28
Semaglutide,Tirzepatide,API,Enzyme
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionBasic Info
-
Product Name:
Butyl methacrylate
Other Name:2-Propenoic acid,2-methyl-,butyl ester;Methacrylic acid,butyl ester;Butyl methacrylate;n-Butyl methacrylate;Butyl 2-methyl-2-propenoate;Acryester B;Blemmer BMA;Butyl 2-methylacrylate;NSC 20956;2-Methyl-2-propenoic acid butyl ester;N 212;Light Ester NB;Acryester BMA;Visiomer n-BMA;2-Methyl-acrylic acid butyl ester;55922-77-5;159172-35-7;1151915-97-7;1310566-97-2;1343477-79-1
CAS No.:97-88-1
Molecular Formula:C8H14O2
InChIKeys:InChIKey=SOGAXMICEFXMKE-UHFFFAOYSA-N
Molecular Weight:142.19600
Exact Mass:142.20
EC Number:618-468-5
UNII:R5QX287XXU
ICSC Number:1018
NSC Number:20956
UN Number:2227
DSSTox ID:DTXSID4024696
Color/Form:Colorless liquid
HScode:2916140000
Categories:
Characteristics-
PSA:
26.30000
XLogP3:1.90580
Appearance:N-butyl methacrylate appears as a clear colorless liquid. Flash point 130°F. Less dense (7.5 lb / gal) than water and insoluble in water. Hence floats on water. Vapors heavier than air. Used to make resins adhesives, and oil additives.
Density:0.8936 g/cm3 @ Temp: 20 °C
Melting Point:-25 °C
Boiling Point:160 °C @ Press: 760 Torr
Flash Point:41ºC
Refractive Index:1.4225-1.4245
Water Solubility:H2O: 3 g/L (20 ºC)
Storage Conditions:Refrigerator (+4ºC) + Flammables area
Vapor Pressure:2 mm Hg ( 20 °C)
Vapor Density:4.91 (15 °C, vs air)
Toxicity:LD50 orally in Rabbit: > 2000 mg/kg LD50 dermal Rabbit > 2000 mg/kg
Flammability characteristics:Lower flammable limit: 2% in air; Upper flammable limit: 8% in air (estimates)
Explosive limit:vol% in air: 1
Odor:Faint characteristic odor of esters
Henrys Law Constant:Henry's Law constant = 4.96X10-4 atm-cu m/mol at 25 °C (est)
Experimental Properties:Readily polymerized|Liquid water interfacial tension: 35 dynes/cm = 0.035 N/m at 20 °C; Heat of polymerization: -180 BTU/lb = -100 cal/g = -4.2X10+5 J/kg; Reid vapor pressure: low|It weighs about 7.5 lb/gal.|Hydroxyl radical reaction rate constant = 2.3X10-11 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Flammable. Sensitive to moisture. Insoluble in water.
Reactive Group:Acrylates and Acrylic Acids
Reactivity Alerts:Highly Flammable
Reactivity Profile:N-BUTYL METHACRYLATE reacts exothermically with acids. Reacts with oxidizing agents. Strong oxidizing acids may cause a reaction that is sufficiently exothermic to ignite the reaction products. Heat is generated with caustic solutions. Generates flammable hydrogen with alkali metals and hydrides. Polymerizes easily (NTP, 1992).
Autoignition Temperature:562 °F (USCG, 1999)|562 °F|290 °C
Heat of Combustion:-14,800 BTU/lb = -8,230 cal/g = -344X10+5 J/kg (est)
Flammable Limits:Lower flammable limit: 2% in air; Upper flammable limit: 8% in air (estimates)
Physical Dangers:As a result of flow, agitation, etc., electrostatic charges can be generated.
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Skin irritation, Category 2
Eye irritation, Category 2
Skin sensitization, Category 1
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
H315 Causes skin irritation
H319 Causes serious eye irritation
H317 May cause an allergic skin reaction
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P317 If skin irritation or rash occurs: Get medical help.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Above 50°C use a closed system, ventilation and explosion-proof electrical equipment. Prevent build-up of electrostatic charges (e.g., by grounding). Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from oxidants. Cool. Dry. Keep in the dark. Store only if stabilized. Store in an area without drain or sewer access.Temp during storage must be kept low to minimize formation of peroxides and other oxidation products ... Storage temp below 30 deg C are recommended for the polyfunctional methacrylates ... The methacrylate monomers should not be stored for longer than one year. Shorter storage times are recommended for the aminomethacrylates, ie, three months, and the polyfunctional methacrylates, ie, six months. Many of these cmpd are sensitive to UV light and should, therefore, be stored in the dark. The methacrylic esters may be stored in mild steel, stainless steel, or aluminum. Methacrylic acid & derivatives
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
Semaglutide,Tirzepatide,API,Enzyme
-
Location:
Unit ST-308, No. 329, Jiahe Road, Siming District, Xiamen
-
Payment Terms:
TT against copy of documents,L/C,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
7
-
Total Annual Revenue:
$50 million-$100 million
-
Total Employees:
11-50
-
Year of Establishment:
2018
-
-
Inquiry History3 Inquiries
Country Product Purchase Quantity Date Posted 
Pakistan
Butyl methacrylate 99% liquid 97-88-1
20 MT Oct 6, 2023 
Malaysia
Butyl Methacrylate
1 TON Jan 6, 2025 
Russia
Butyl methacrylate
100 KG Dec 29, 2023 Post an enquiry for this product
Hot Related Products
-
![Methyl methacrylate 99% 80-62-6]( "Methyl methacrylate 99% 80-62-6")
Methyl methacrylate 99% 80-62-6 -
![Huge in Selling Excellent Quality Cas No. 79-41-4 Methacrylic Acid MAA for Paints, Adhesives, and Leather Treatment]( "Huge in Selling Excellent Quality Cas No. 79-41-4 Methacrylic Acid MAA for Paints, Adhesives, and Leather Treatment")
Huge in Selling Excellent Quality Cas No. 79-41-4 Methacrylic Acid MAA for Paints, Adhesives, and Leather Treatment -
![Low Price N-Butanol CAS 71-36-3 Chemical C4h10o N-Butyl Alcohol]( "Low Price N-Butanol CAS 71-36-3 Chemical C4h10o N-Butyl Alcohol")
Low Price N-Butanol CAS 71-36-3 Chemical C4h10o N-Butyl Alcohol$1000-1300/MT FOB
-
![Chinese high-quality MMA supplier]( "Chinese high-quality MMA supplier")
Chinese high-quality MMA supplier -
![1-Butanol 99% colorless zwt71-36-3 zhishang]( "1-Butanol 99% colorless zwt71-36-3 zhishang")
1-Butanol 99% colorless zwt71-36-3 zhishang -
![99.9% MMA Methyl Methacrylate for PMMA used for Polymethyl methacrylate (PMMA) production]( "99.9% MMA Methyl Methacrylate for PMMA used for Polymethyl methacrylate (PMMA) production")
99.9% MMA Methyl Methacrylate for PMMA used for Polymethyl methacrylate (PMMA) production
