Arylic Emulsion Polymer for Soil Stabilisation MILKY WHITE

Sand fixing agent is a high permeability water soluble product. Designed for the existing concrete floor due to poor construction, wear resistance, low strength, resulting in sand and developed. Spraying directly on the concrete

surface, infiltrating into the interior of the concrete, activating the hydration

reaction of cement, thus improving the water tightness and strength of

concrete, improving the resistance of concrete and restraining the effect of

sand and dust.

APPLICATION

Mix the emulsion with water using the following rations .put loose sand into the potholes .level until falt then spray over with the sand fixing agent.make sure that the emulsion sips and infiltrate all the way though the sand for effectiveness.alow to it dry .This product is waterproofing and its weather proof and the applied area can stay intact for 3-5 years .

RATIO

1 kg emulsion, 1 kg water

1 kg emulsion, 2 kg water

FEATURES

Wear resistance. Easy to use, while not affecting the use of the original floor.

Main Ingredients:

The main components are organic and inorganic silicon compounds, and a small amount of crystallization catalyst.

Advantages of this product:

1) Improve the various physical strengths of the substrate, and the strength continues to increase over time.

2) Improve chemical resistance, weathering resistance, increase water tightness and increase the surface strength of mortar..