Butyric anhydride
ISO
106-31-0
Industrial Grade
99%
barrel
2023-12-31
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202771 visits to its shop, is a reputable Manufactory that has been providing Butyric anhydride products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Butyric anhydride
Other Name:Butanoic acid,1,1′-anhydride;Butyric anhydride;Butanoic acid,anhydride;Butanoic anhydride;Butyryl oxide;Butyric acid anhydride;n-Butyric acid anhydride;n-Butyric anhydride;Butanoyl anhydride;Butanoyl butanoate;Butyryl anhydride;86977-44-8
CAS No.:106-31-0
Molecular Formula:C8H14O3
InChIKeys:InChIKey=YHASWHZGWUONAO-UHFFFAOYSA-N
Molecular Weight:158.19
Exact Mass:158.20
BRN:1099474
EC Number:203-383-4
UNII:A88LE742VX
UN Number:2739
DSSTox ID:DTXSID8026729
Color/Form:Water-white liquid
HScode:2915900090
Categories:
Characteristics-
PSA:
43.4
XLogP3:1.64
Appearance:Clear colorless to light yellow Liquid
Density:0.9668 g/cm3 @ Temp: 20 °C
Melting Point:-75 °C
Boiling Point:199.4-201.4 °C
Flash Point:190 °F
Refractive Index:1.421
Water Solubility:Decomposes in water;alcohol: soluble (with decomposition)(lit.)
Storage Conditions:Store below +30°C.
Vapor Pressure:10 mm Hg ( 79.5 °C)
Vapor Density:5.45 (vs air)
Toxicity:Oral-Rat LD50: 8790 mg/kg; Oral-Mouse LDL0: 1000 mg/kg
Flammability characteristics:Combustible in case of open flame, high temperature and strong oxidant; burning emits irritating smoke
Explosive limit:1.1%, 104°F
Odor:PUNGENT ODOR
Henrys Law Constant:Henry's Law constant = 1.1X10-4 atm-cu m/mole at 25 °C (est)
Experimental Properties:Hydrolyzes to butyric acid; wt/gal 8.1 lb at 20 °C|Molar heat capacity (298.15 K) = 283.7 J/mol K|Hydroxyl radical reaction rate constant = 3.34X10-12 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Slowly reacts with water to form butyric acid.
Reactive Group:Anhydrides
Reactivity Profile:BUTYRIC ANHYDRIDE reacts exothermically with water. The reaction is usually slow, but might become violent if local heating accelerates their rate. Acids accelerate the reaction with water. Incompatible with acids, strong oxidizing agents, alcohols, amines, and bases.
Autoignition Temperature:535 °F (279 °C)
Flammable Limits:Lower flammable limit: 0.9% by volume; Upper flammable limit: 5.8% by volume
Heat of Vaporization:50 kJ/mol at bp
Critical Temperature & Pressure:Critical temperature: 644 K /estimated/; critical pressure: 2.63X10+6 Pa /estimated/
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 4, Oral
Skin corrosion, Sub-category 1B
Serious eye damage, Category 1
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H302 Harmful if swallowed
H314 Causes severe skin burns and eye damage
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P317 Get medical help.
Storage P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
