Moisture Wicking Finishing Agent for polyester fabric Sylic chemical

What Drives Us

• Provide you with all relevant technical support on textile industry, and support on-site visits to factories to provide on-site help.

• 
  

• We can match the same quality products according to the your product standard,continuously supply you stable quality products.

• 
  

• One-stop chemical soucing is available.

• 
  

• We have a mature logistics team and careful after-sales, will solve all the after-sales problems in time.

• 
  

• We support OEM/ODM.

• 
  

• Our technical team will continue to research and development of new products, and we will give you latest product recommendations, to ensure your products to stand in the innovation invincible place!

This wicking agent is a multi-functional finishing agent, suitable for finishing of polyester, polyester blended, nylon, acetate and spandex fabrics, which endows the fabric with durable hydrophilic, moisture wicking, antistatic, easy to decontaminate features, etc. It is a functional auxiliary that can be used in textiles that require moisture wicking, so that polyester and other blended fabrics have better moisture wicking function.

1.Make polyester fiber easy to decontaminate.

2.The polyester fiber is grafted with a hydrophilic group to give the polyester fiber excellent hydrophilic properties.

3.Make polyester fiber have good moisture absorption, and give polyester fiber excellent moisture absorption and perspiration performance.

4.The polyester fiber has conductive groups, giving the polyester fiber good antistatic properties.

5.Make polyester fiber soft and lubricating, reduce fabric scratches and creases.

6.Give the polyester fiber a fluffy feel, so that the pile and fluff products have a fuller feel.

7.Disperse and dissolve oligomers precipitated from polyester in a high-temperature and high-pressure bath to improve the color yield, vividness and finish of the fabric.

Suggested prescription: Dilute 5-15%.

Process: water→stirring 80r/min→heat to (90~95)℃→slow cast CY-481G→swell→75~80℃ thermal insulation (60~90) minutes

Bell→cool to 40℃→filter and discharge.

Precautions

◆During the swelling process, there will be a layering phenomenon (FU5400 floating in the upper layer, water in the lower layer), which is a normal phenomenon.It will be homogenized when the temperature is lower than 65℃;

◆No need to add defoamer when diluting 10% concentration, it is recommended to add 0.2% polyether defoamer before diluting 15% and above concentration;

◆ Too high concentration may cause the dilution fluid to deteriorate (especially in winter). It is recommended that the dilution concentration should not exceed 20%

Products that can be derived (specially for textile additives suppliers)

Application process

Real shipment cases

Shipping to Argentina