Caprylic/Capric Triglyceride Cas65381-09-1

• Description

  GTCC: Aka GTCC (Caprylic/Capric Triglyceride)
  Chemical composition: glycerin tricaprylate glycerin tridecanoate
  

  Octyl capric acid triglyceride molecular weight: 500

  Quality standard of glycerol octycaprate:
  Appearance and odor: odorless, colorless or light yellow transparent oily liquid
  Acid value: ≤0.5mgKOH/g Iodine value: ≤0.5gI2/100g
  Saponification value: 325-360 Specific gravity (d20) : 0.92-0.96
  GTCC is a mixed triester of medium carbon fatty acids in glycerol and vegetable oil. It is a colorless, odorless, low viscosity, lipophilic softener with high antioxidant properties. In cosmetics, GTCC can replace a variety of oils, as a softening agent and fat rich agent used, can also be used as a carrier and diluent added to active preparations or sterols and other conditioning agents. Cosmetics using GTCC are free of antioxidants and other stabilizers and do not cause adverse side effects.
  
  
  
  

  Safety data of capric glyceride:
  GTCC has been included in GB2760-96, GB12493-90 food additives classification and code standards; It has been widely used in food, medicine, cosmetics and other industries and has been proven to have no irritation to the human body.
  

  Octyl capric acid glyceride Application:
  GTCC is widely used in sunscreens, creams and lotions. Post sun protective cream and lotion; Used for hair conditioning oil, cream and head oil, can make hair bright, smooth and easy to comb; Bath oil; Skin care oil and nutrient solution; Facial cleansers, creams and lotions; Baby skin oils, creams and lotions; Cream, stick, medicine. Make the skin lubricated and shiny, nutrients are easily absorbed by the skin, and play a good role in the uniform and delicate makeup.
  GTCC has low viscosity and can be used as the base material of moisturizing factor, stabilizer of cosmetics, antifreeze and homogenizer.
  This product can also be used in lipstick, lip balm, shaving cream to change the dispersion and gloss of cosmetics.
  Recommended dosage: 1~15%
  
  
  
  

  Packaging: This product uses polyethylene plastic drum packaging, net weight of 50 kg per barrel, iron drum packaging: net weight of 200 kg per barrel.
  Storage: This product should be stored away from light, clean, cool, dry place, sealed storage.
  

  Pls input...

  Items	Specifications
  Appearance	A colorless or slightly yellow oily liquid
  Iodine Value (mgI2/100g)	≤1.0
  Acid value （mgKOH/g）	≤0.1
  Hydroxyl value（mg KOH/g）	≤5
  Moisture %	≤0.15
  Saponification Value mg(KOH)/g	325～360
  Specific Gravity（20℃）	0.940～0.955
  Heavy Metal（Pb）PPM	≤10
  As PPM	≤2
  Cr PPM	≤0.05
  Cu PPM	≤0.1
  Pb PPM	≤0.1
  Ni PPM	≤0.1
  Sn PPM	≤0.1
  Viscosity 20℃	25-33
  Total ash	＜0.1
  Peroxide Value	≤1.0
  Colour APHA	≤50
  Assay ≥98%	C10(36-47) ：40.5 C 8 (≧53 ) ：59.4

  Material Safety Data Sheet

  Caprylic/Capric Triglyceride MSDS

  Last Updated: 01/05/2022

  Created:05/02/2018

  Prepared according to GB/T 16463-2008

  and GB/T 17519-2013

  
  

  Section 2 - Hazards Identification

  Emergency Overview

  Inhalation May be harmful if inhaled. May cause respiratory tract irritation. Skin May be harmful if absorbed through

  skin. May cause skin irritation. Eyes May cause eye irritation.

  Section 3- Composition, Information on Ingredients

  Composition

  Content

  CAS No.

  Caprylic/Capric Triglyceride

  100%

  73398-61-5; 65381-09-1

  Section 4- First Aid Measures

  Eye Contact:

  Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.

  Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the

  contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and

  groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing

  before reusing

  
  

  Product Name: Caprylic/Capric Triglyceride

  Last  Updated:01/05/2022

  Serious Skin Contact: Not available.

  Inhalation:

  Allow the victim to rest in a well ventilated area. Seek immediate medical attention.

  Serious Inhalation: Not available.

  Ingestion:

  Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing,

  perform mouth-to-mouth resuscitation. Seek immediate medical attention.

  Serious Ingestion: Not available.

  Section 5- Fire and Explosion Data

  Flammability of the Product: May be combustible at high temperature.

  Auto-Ignition Temperature: Not available.

  Flash Points: 240℃ .

  Flammable Limits: 433℃ .

  Products of Combustion: These products are carbon oxides (CO, CO2).

  Fire Hazards in Presence of Various Substances: Not available.

  Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical

  impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.

  Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray,

  fog or foam. Do not use water jet.

  Special Remarks on Fire Hazards: Not available.

  Special Remarks on Explosion Hazards: Not available.

  Section 6- Accidental Release Measures

  Small Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.

  Large Spill:

  Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading

  water on the contaminated surface and allow to evacuate through the sanitary system.

  Section 7- Handling and Storage

  Precautions:

  Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under

  a fume hood. Ground all equipment containing material. Do not breathe gas/fumes/ vapour/spray. Avoid contact with

  eyes Wear suitable protective clothing If you feel unwell, seek medical attention and show the label when possible.

  Storage:

  Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep

  in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong

  oxidizing agents.

  Section 8- Exposure Controls/Personal Protection

  Engineering Controls:

  Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their

  respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station

  location.

  Personal Protection: Splash goggles. Lab coat.

  Personal Protection in Case of a Large Spill:

  Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a specialist

  BEFORE handling this product.

  Exposure Limits: Not available

  Section 9- Physical and Chemical Properties

  Physical state and appearance: Colorless or light yellow liquid.

  Odor: Light fat odor.

  Taste: Not available.

  Molecular Weight: Not available.

  Color: Colorless or light yellow.

  pH (1% soln/water): Acid.

  Boiling Point: 260~280°C.

  Melting Point: -10°C.

  Critical Temperature: Not available.

  Specific Gravity: Not available.

  Vapor Pressure: 0.133mmHg(100°C).

  Vapor Density: Not available.

  Volatility: Not available.

  Odor Threshold: Not available.

  Water/Oil Dist. Coeff.: Not available.

  Ionicity (in Water): Not available.

  Dispersion Properties: Dissolved in organic solvents.

  Section 10- Stability and Reactivity Data

  Stability: The product is stable.

  Instability Temperature: Not available.

  Conditions of Instability: Not available.

  Incompatibility with various substances: Not available.

  Corrosivity: Non-corrosive in presence of glass.

  Special Remarks on Reactivity: Not available.

  Special Remarks on Corrosivity: Not available.

  Polymerization: No.

  Section 11- Toxicological Information

  Routes of Entry: Eye contact. Ingestion.

  Toxicity to Animals:

  LD50: 4090mg/kg(Mouse through throat). LC50: Not available

  
  

  Chronic Effects on Humans: Not available.

  Other Toxic Effects on Humans:

  Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant, permeator), of inhalation.

  Special Remarks on Toxicity to Animals: Not available.

  Special Remarks on Chronic Effects on Humans: Not available.

  Special Remarks on other Toxic Effects on Humans: Not available.

  Section 12- Ecological Information

  Ecotoxicity: Not available.

  BOD5 and COD: Not available.

  Products of Biodegradation:

  Possibly short term degradation are not likely hazardous. However, long term degradation products may

  arise.

  Toxicity of the Products of Biode gradation:The products of degradation are more toxic.

  Special Remarks on the Products of Biodegradation: Not available.

  Section 13- Disposal Considerations

  Waste Disposal:

  Waste must be disposed of in accordance with federal, state and local environmental

  control regulations.

  Section 14- Transport Information

  Sea transport(IMDG)

  Proper shipping name: Caprylic/Capric Triglyceride

  Proper shipping name: Not regulated by DOT.

  Hazard class or division: None

  Identification NO:None

  Packing group: Not applicable

  Additional Information: None

  HS Code: 2915900090

  Section 15- Other Regulatory Information

  Federal and State Regulations: TSCA 8(b) inventory: Stearic Acid

  Other Regulations: Not available.

  Other Classifications:

  WHMIS (Canada): Not controlled under WHMIS (Canada).

  DSCL (EEC): R36- Irritating to eyes.

  Protective Equipment:

  Not applicable. Lab coat. Not applicable. Splash goggles.
• 

• Product Description
  

R&D, intermediates.

Packing&Delivery 

Package：1kg small bag &25kg fiber drum

Delivery：prompt delivery 

Contact information 

Contact name ：Angie

Wechat NO：13782103232

whatsapp NO：:+8613782103232

Email：Angie@comingschemi.com      

Pls feel free to contact me at any time .

Wuhan Comings Biotechnology Co., Ltd. was established in 2016. Since its establishment, the company has always been committed to making more people healthy, making more people young and happy, and providing customers with high-quality and efficient services.

The company cooperates with biological experts from many universities, adopts modern gene cloning technology and unique purification technology, and strictly controls all aspects. The adipotide we produce are sold well in Europe, Africa, and America, and many customers have given good reviews.

And our company has storage bases in Shenzhen, Shanghai, Qingdao ports to ensure that all goods can arrive safely, on time and quickly.

Wuhan Comings Biotechnology Co., Ltd. is looking forward to cooperating with you with professional knowledge, high-quality service and competitive price!