Enasol v nPB Plus2 Precision cleaning agent
Product Description
Enasolv nPB Plus2 is a cleaning agent that meets the VOC limit of GB38508-2020 national standard, has high cleaning power, and low environmental hazards. It can be used for soaking, spraying, steam degreasing and other cleaning processes to remove various pollutants and impurities.
Enasolv nPB Plus2 can directly replace chlorinated solvents, n-bromopropane cleaning agents, transition products such as HCFC141B and 225, as well as solvent cleaning agents that do not meet the new national standards.
Enasolv nPB Plus2 can efficiently remove machining grease, particles, adhesives, etc. in precision metal processing, as well as cleaning particles, liquid crystals, grease, wax, asphalt, etc. in optical devices. Efficient removal of soldering flux, solder paste, ion residues, etc. in circuit printing assembly.
Enasolv nPB Plus2 is safe for metal workpieces, such as aluminum, copper, copper alloys, magnesium, nickel, carbon steel, stainless steel, zinc, and other workpieces. It is also suitable for most non-metallic workpieces such as plastic and rubber parts.
Features and Benefits
Complies with the new national standard GB38508-2020
Safe use, no flash point
Strong cleaning power
Good permeability
Can be recycled to reduce losses
Meets RoHS requirements
The ozone depletion coefficient ODP is close to zero and does not destroy ozone
Low greenhouse effect GWP and environmentally friendly
Application
Precision metal processing cleaning
Vapor phase degreasing process
Immersion cleaning
Spray cleaning
Pollutants that can be removed
l Adhesive | l Oil |
l Stretch oil | l Hydraulic oil |
l Solder flux and solder paste | l Solder flux and solder paste |
l Solder flux and solder paste | l Resin ink |
l Silicone oil | l Optical particles |
physical characteristics
Appearance | Clear liquid with specific odor |
Flash point | None |
Typical boiling range | 60-70°C |
Specific gravity（25 °C） | 1.30 |
Viscosity（25 °C） | 0.35cps |
Vapor pressure（20 °C） | 210mmHg |
Surface tension | 20 dynes/cm |
Flammability limits（vol%） | 4-8 % |
Solubility of water | 2.45 g/l |
Inter solubility with other solvents | Soluble with most solvents |
Volatility | Completely |
Shelf time
Sealed and stored at room temperature for 24 months from the production date. If stored for more than 24 months, it is recommended to test before use.
Environmental protection and regulations
Ozone Depletion Potential（ODP） | 0.013-0.018 |
Global Warming Potential (GWP) | 285 |
Volatile Organic Compounds (VOC) | < 900g/l |
Disposal/Safety
Disposal: Recommend contacting your current or local environmental service company for disposal of thisproduct.
Safety: Please see Material Safety Data Sheet for further information.
Packing：Enasolv nPB Plus2 is available in 25 kg pails and 250 kg drums.
