PROPARGITE 90%TC
2312-35-8
any port
200kg/drum
2024-07-14
HEA,EGDMA,SA,PFOEMA,GMA,LMA
-
Product Description
-
Seller Information
-
DescriptionBasic Info
-
Product Name:
Propargite
Other Name:Sulfurous acid,2-[4-(1,1-dimethylethyl)phenoxy]cyclohexyl 2-propyn-1-yl ester;Sulfurous acid,2-(p-tert-butylphenoxy)cyclohexyl 2-propynyl ester;Sulfurous acid,2-[4-(1,1-dimethylethyl)phenoxy]cyclohexyl 2-propynyl ester;2-(p-tert-Butylphenoxy)cyclohexyl 2-propynyl sulfite;Omite;Naugatuck D 014;D 014;Omite 85E;Propargil;Propargite;Comite;Omite 57E;2-(p-tert-Butylphenoxy)cyclohexyl propargyl sulfite;Cyclosulfyne;BPPS;Kelaran;D 014 (ester);Comite II;Acarit 720EC;2-(4-(tert-Butyl)phenoxy)cyclohexyl prop-2-yn-1-yl sulfite;60098-53-5
CAS No.:2312-35-8
Molecular Formula:C19H26O4S
InChIKeys:InChIKey=ZYHMJXZULPZUED-UHFFFAOYSA-N
Molecular Weight:350.47200
Exact Mass:350.47
EC Number:219-006-1
UNII:30M429ANKL
UN Number:3082|2765
DSSTox ID:DTXSID4024276
Color/Form:Brownish-yellow, oily viscous liquid (tech.)|Light to dark brown viscous liquid
HScode:2920909014
Categories:
Characteristics-
PSA:
63.97000
XLogP3:4.78490
Appearance:Propargite is a dark colored liquid. It is a wettable powder or water emulsifiable liquid. It can cause illness by inhalation, skin absorption and/or ingestion. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. Since it is a liquid it can easily penetrate the soil and contaminate groundwater and nearby streams. It is used as a pesticide. Practically insoluble in water (10.5 mg/L). Used as an acaricide.
Density:1.17 g/cm3
Melting Point:<25 °C
Boiling Point:450.7ºC at 760 mmHg
Flash Point:226.4ºC
Refractive Index:1.56
Water Solubility:In water, 0.215 mg/L at 25 deg C
Storage Conditions:2-8ºC
Vapor Pressure:6.9E-08mmHg at 25°C
Toxicity:LD50 in male, female rats (mg/kg): 1480, 1480 orally; 250, 680 dermally (Gaines); LC50 in rainbow trout, bluegill sunfish (ppb): >100, 31 (Stone)
Henrys Law Constant:Henry's Law constant = 6.4X10-7 atm cu m/mol at 25 °C (est)
Experimental Properties:Hydroxyl radical reaction rate constant = 6.0X10-11 cu cm/molec-sec at 25 °C (est)|DARK AMBER, VISCOUS OIL; DENSITY: 1.085-1.115 @ 25 °C; PRACTICALLY INSOL IN WATER; SOL IN MOST ORG SOLVENTS. /TECHNICAL PRODUCT/
Air and Water Reactions:Practically insoluble in water (10.5 mg/L). Slowly reacts with water to form sulfur dioxide and alcohols; reaction is more rapid under basic or acidic conditions.
Reactive Group:Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Reactivity Profile:PROPARGITE is a sulfite ester. As an ester, it will hydrolyze to form sulfur dioxide and alcohols; reaction is more rapid under basic conditions. It may react exothermically with acids to generate alcohols. Heat will be generated by interaction with basic or caustic solutions. Flammable hydrogen is generated by mixing with alkali metals and hydrides.
Hazard IdentificationClassification of the substance or mixture
Skin irritation, Category 2
Serious eye damage, Category 1
Acute toxicity - Category 3, Inhalation
Carcinogenicity, Category 2
Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H315 Causes skin irritation
H318 Causes serious eye damage
H331 Toxic if inhaled
H351 Suspected of causing cancer
H410 Very toxic to aquatic life with long lasting effects
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P203 Obtain, read and follow all safety instructions before use.
P273 Avoid release to the environment.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P317 Get medical help.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P318 IF exposed or concerned, get medical advice.
P391 Collect spillage.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
HEA,EGDMA,SA,PFOEMA,GMA,LMA
-
Location:
No.9, Lane 3599, Qixin road, Minhang district, Shanghai, China
-
Payment Terms:
100% TT in advance
-
Average lead Time:
15
-
Total Annual Revenue:
$25 million-$50 million
-
Total Employees:
101-200
-
Year of Establishment:
2006
JIN DUN CHEMICAL belongs to JIN DUN GROUP. It is a professional enterprise dedicated to the development and production of special (meth)acrylate monomers. The head office is located in Shanghai city, near Hongqiao airport.The R&D center of JIN DUN is located in Ningbo city, Zhejiang province.
JIN DUN CHEMICAL focus on the coating, automobile, electricity and pharmaceutical area, always try best to be the professional supplier of new raw material for the advanced material in coating, automobile chemicals, electricity chemicals and pharmaceutical intermediate.
Welcome our customers and friends to visit our company.
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
