Benzyl Bromide 98% Purity CAS 3544-24-9 High Purity Benzylic Bromide Building Block for Organic Synthesis, Pharmaceutical Intermediate, and Chemical R
TDS
3544-24-9
Reagent Grade
99%
qingdao
//
5g/bottle, 25g/bottle, 100g/bottle, 500g/bottleolorless to pale yellow clear liquid
2026-09-06
3-(1-Naphthoyl)indole
-
Product Description
-
Seller Information
-
Description3-Aminobenzamide is a potent inhibitor of PARP with IC50 of appr 50 nM in CHO cells, and acts as a mediator of oxidant-induced myocyte dysfunction during reperfusion.Research & Reference Note
Benzyl Bromide 98% Purity CAS 3544-24-9 High Purity Benzylic Bromide Building Block for Organic Synthesis, Pharmaceutical Intermediate, and Chemical R is listed on ECHEMI for industrial / laboratory sourcing. This listing is for industrial and laboratory research use. Product information on ECHEMI is provided for sourcing and specification reference. It is not medical advice, a clinical recommendation, or an approved therapy description. Always verify regulatory status, purity, and intended use with the supplier and applicable authorities before purchase or use.
Authoritative sourcesDisclaimer: This listing is for industrial and laboratory research use. Product information on ECHEMI is provided for sourcing and specification reference. It is not medical advice, a clinical recommendation, or an approved therapy description. Always verify regulatory status, purity, and intended use with the supplier and applicable authorities before purchase or use.
Reviewed by ECHEMI Scientific Review - Platform editorial review for research chemicals
Certificates-
TDS
Basic Info-
Product Name:
3-Aminobenzamide
Other Name:Benzamide,3-amino-;Benzamide,m-amino-;3-Aminobenzamide;m-Aminobenzamide;SR 4294;[3-(Aminocarbonyl)phenyl]amine;NSC 36962;3-Carboxamidoaniline;WD 97-000835;3-(Aminocarbonyl)aniline;3-Carbamoylaniline;INO 1001;624747-02-0
CAS No.:3544-24-9
Molecular Formula:C7H8N2O
InChIKeys:InChIKey=GSCPDZHWVNUUFI-UHFFFAOYSA-N
Molecular Weight:136.15
Exact Mass:136.15
BRN:2802373
EC Number:222-586-9
UNII:8J365YF1YH
NSC Number:36962
DSSTox ID:DTXSID90188922
HScode:29242990
Categories:
Characteristics-
PSA:
69.1
XLogP3:-0.5
Appearance:white to off-white powder
Density:1.2±0.1 g/cm3
Melting Point:115-116 °C
Boiling Point:329.6°C at 760 mmHg
Flash Point:153.2±23.2 °C
Refractive Index:1.633
Water Solubility:soluble in dimethylformamide (~30 mg/ml), dimethyl sulfoxide (~30 mg/ml), phosphate buffered saline (pH7.2) (~2 mg/ml), water (25 mg/ml), and ethanol (25 mg/ml).ethanol: 50 mg/mL, clear, faintly yellow
Storage Conditions:Storeunderinertgas
Vapor Pressure:2.6X10-5 mm Hg at 25 deg C (est)
Toxicity:Oral-Wild Bird LD50: 1000 mg/kg
Flammability characteristics:Flammable; burning produces toxic nitrogen oxide fumes
Henrys Law Constant:Henry's Law constant = 7.8X10-13 atm-cu m/mole at 25 °C (est)
Experimental Properties:Hydroxyl radical reaction rate constant = 4.7X10-11 cu cm/molecule-sec at 25 °C (est)
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 4, Oral
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Warning
Hazard statement(s) H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
3-(1-Naphthoyl)indole
-
Location:
RONGSHENG BEIYUANDAJIE 9, LICHENG DISTRICT,JINAN, SHANDONG CHINA
-
Year of Establishment:
2022
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
Hot Related Products
-
SODIUM SULPHATE ANHYDROUS 99.15% WHITE POWDER$200-250/MT FOB
-
Sodium Sulfate (Alkali) 99% Min - High Purity -
Aluminum Oxide Al2O3 -
Sodium Sulphate Anhydrous for Detergent/Glass/Textile -
Sodium Sulfate Anhydrous 99% Industrial Grade Na2SO4 White Crystalline Powder -
High Purity 99.99% Aluminum Oxide Powder Alumina Al2O3 White Powder CAS 1344-28-1