Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Basic Yellow 24

Basic Yellow 24

Basic Yellow 24 structure

Basic Yellow 24 

structure
  • CAS No:

    52435-14-0

  • Formula:

    C18H18N5S.CH3O4S

  • Chemical Name:

    Basic Yellow 24

  • Synonyms:

    Benzothiazolium,2-[2-[(1,3-dihydro-1,3-dimethyl-2H-benzimidazol-2-ylidene)methyl]diazenyl]-3-methyl-,methyl sulfate (1:1);Benzothiazolium,2-[[(1,3-dihydro-1,3-dimethyl-2H-benzimidazol-2-ylidene)methyl]azo]-3-methyl-,methyl sulfate;2-(1,3-Dimethyl-2-benzimidazolinylidenemethylazo)-3-methylbenzothiazolium methyl sulfate;C.I. Basic Yellow 24;Sumiacryl Yellow 5R;Basacryl Yellow 5GL;Basic Yellow 24;Kayacryl Brilliant Yellow 5GL-ED;Light yellow (Chinese dye);Light yellow;Cationic Yellow 7GL;Cationic Light Yellow 7GL;Cationic Y 7GL;Bezacryl Yellow 5GL;12217-51-5;68893-88-9;113255-22-4;1338567-44-4

  • Categories:

    Dyes and Pigments  >  Dye

Basic Yellow 24 Basic Attributes

447.53114

447.10300

257-917-6

DTXSID3068756

Characteristics

141.51000

3.53280

Basic Yellow 24 Use and Manufacturing

Methods of Manufacturing

Using N-methyl-2-benzothiazepine hydrazone and 2, 2-dichloromethylbenzimidazole as the main raw materials, after condensation, methylate with dimethyl sulfate, filter off the waste residue, and add to the filtrate A small amount of leveling agent OP is obtained by salting out, filtering and drying. Add 400L of water to the reaction pot, slowly add 30kg of 30% hydrochloric acid, 24.6kg of 2, 2-dichloromethylbenzimidazole, increase the temperature to 80-85°C, add 24kg of N-methyl-2-benzothiazole hydrazone, Continue to slowly increase the temperature to 95-110°C for 2h. Then cool down to about 15℃, add 24kg of magnesium oxide, control the pH value of 8-9, stir for 10min, continue to cool to 10℃, add 124kg of dimethyl sulfate, control the reaction temperature of 30-35℃, pH value of 8, and react for 1h. Then add 20kg of dimethyl sulfate, control the temperature to 38-43℃, and react for 2h, the pH value will drop to about 6. After the reaction, the temperature was raised to 90-95°C within 1 hour, and stirred for 15 minutes until the Congo red test paper turned blue. Add water to adjust the volume of the material liquid to about 1100L, heat to 90-95°C, filter while it is hot, and wash the filter residue with 200L of 90°C hot water. Combine the filtrate and washing water into the reaction pot, then add 68 kg of hydrochloric acid, 1 kg of leveling agent OP, and stir to dissolve the materials. Add refined salt to 7% of the material for salting out, stir for 1h, filter, and dry to obtain about 60kg of dye.

Uses

Used for dyeing acrylic fiber and its blended fabrics. Dyeing in acetic acid and sodium acetate bath, pH has little effect on shade. It is often combined with cationic red 2GL and brilliant blue RL to form three primary colors, which are combined with bright color spectrum. And dyeing silk in the same bath as the grafting method can improve the fastness.

Benzothiazolium, 2-[2-[(1,3-dihydro-1,3-dimethyl-2H-benzimidazol-2-ylidene)methyl]diazenyl]-3-methyl-, methyl sulfate (1:1): ACTIVE

Computed Properties

Molecular Weight:447.5
Hydrogen Bond Acceptor Count:7
Rotatable Bond Count:2
Exact Mass:447.10349652
Monoisotopic Mass:447.10349652
Topological Polar Surface Area:137
Heavy Atom Count:30
Complexity:594
Undefined Bond Stereocenter Count:2
Covalently-Bonded Unit Count:2
Compound Is Canonicalized:Yes

Recommended Suppliers of Basic Yellow 24

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.