2-Methyl-6-nitroaniline
-
2-Methyl-6-nitroaniline
structure -
-
CAS No:
570-24-1
-
Formula:
C7H8N2O2
-
Chemical Name:
2-Methyl-6-nitroaniline
-
Synonyms:
Benzenamine,2-methyl-6-nitro-;o-Toluidine,6-nitro-;2-Methyl-6-nitrobenzenamine;6-Methyl-2-nitroaniline;2-Nitro-6-methylaniline;2-Methyl-6-nitroaniline;6-Nitro-o-toluidine;2-Amino-3-nitrotoluene;3-Nitro-2-aminotoluene;1-Amino-2-methyl-6-nitrobenzene;NSC 286;NSC 52218;1-Nitro-2-amino-3-methylbenzene;2-Methyl-6-nitro-phenylamine
- Categories:
-
CAS No:
Description
Redish-Brown Solid
2-methyl-6-nitroaniline appears as orange-yellow prisms or brown granular powder. (NTP, 1992)
2-methyl-6-nitroaniline appears as orange-yellow prisms or brown granular powder. (NTP, 1992)
2-Methyl-6-nitroaniline Basic Attributes
152.15
152.15
209-329-6
OUP165YKBC
52218|286
2660
DTXSID7025631
29214300
Characteristics
71.8
2
Brownish Crystalline Powder
1.19 at 212° F (NTP, 1992)
96 °C
124 °C / 1mmHg
110 °C
1.616
H2O: <0.1 g/100 mL at 23 ºC
-20°C Freezer
This chemical is sensitive to prolonged exposure to air. Insoluble in water.
Nitro, Nitroso, Nitrate, and Nitrite Compounds, Organic
2-METHYL-6-NITROANILINE is incompatible with acids, acid chlorides, acid anhydrides, chloroformates, and strong oxidizers. (NTP, 1992)
Safety Information
Ⅲ
IRRITANT
UN 2660 6.1/PG 3
3
23/24/25-33-51/53
28-36/37-45-61-28A
T,N,Xi
Toxic
Stable under normal temperatures and pressures.
P261-P273-P280-P301 + P310-P311
H301-H311-H331-H373-H411
Flash point data for this compound are not available, but it is probably combustible. (NTP, 1992)
|Danger|H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]|P260, P261, P264, P270, P271, P273, P280, P301+P310, P302+P352, P304+P340, P311, P312, P314, P321, P322, P330, P361, P363, P391, P403+P233, P405, and P501|Aggregated GHS information provided by 45 companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H311: Toxic in contact with skin [Danger Acute toxicity, dermal]|P201, P202, P260, P261, P271, P280, P281, P302+P352, P304+P340, P308+P313, P311, P312, P314, P321, P322, P361, P363, P403+P233, P405, and P501
Fires involving this material can be controlled using a carbon dioxide, dry chemical or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
2-Methyl-6-nitroaniline Use and Manufacturing
Nitro-o-methylacetanilide obtained by nitration of o-methylacetanilide with 70% nitric acid is heated to boiling together with concentrated hydrochloric acid, and the reaction product is steam distilled to obtain 6-nitro-o-toluidine with a yield of about 50%.
Used in organic synthesis.
Cosmetics -> Hair dyeing
Computed Properties
Molecular Weight:152.15
XLogP3:2
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:3
Exact Mass:152.058577502
Monoisotopic Mass:152.058577502
Topological Polar Surface Area:71.8
Heavy Atom Count:11
Complexity:155
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 2-Methyl-6-nitroaniline
-
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst,Chemical Materials,Chem&Pharm Intermediates,Organic Intermediates,Feed Additive -
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of 5-Aminoisophthalic acid,3,3-Nitrophthalic anhydride,DNBC,Mono-Methyl 5-nitroisophthalate,5-DNBA,5-Dinitrobenzoyl chloride,6-triiodoisophthalic acid (5-Atipa),Formamidine Disulfide Dihydrochloride,5-dinitrobenzoic acid,3-Aminophthalic hydrazide,3-Nitrophthalic acid (3-NPA),3,2-(4-Chlorobenzoyl)benzoic acid,4-Nitrophthalonitrile,4-Nitrophthalimide,3-Nitrophthalonitrile,2-Methyl-4-nitroaniline,5-Dinitrobenzoic acid,DNBA,2-Methyl-6-nitroaniline,Sodium diatrizoate dihydrate,Pyridoxine dipalmitate,4-Nitro-N-methylphthalimide,Dimethyl 5-nitroisophthalate,4-Benzoquinone dioxime,5-DNBC,5-Nitroisophthalic acid,pyridoxine tripalmitate -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 570-24-1Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
Disperse Violet 1
128-95-0
-
Acid Blue 1
129-17-9
-
4,5-Diamino-1-(2-hydroxyethyl)pyrazole sulfate
155601-30-2
-
4-Ethoxyaniline Formula
156-43-4
-
4-(Ethylamino)phenol Formula
659-34-7
-
Phenoxazin-5-ium, 3,7-bis(diethylamino)-, chloride (1:1) Formula
33203-82-6
-
HC Blue 2 Structure
33229-34-4
-
Acid Red 95 Structure
33239-19-9
-
What is 7-(2H-Naphtho[1,2-d]triazol-2-yl)-3-phenyl-2H-1-benzopyran-2-one
3333-62-8
-
What is Bismuth citrate
813-93-4