Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 2-Nitrobenzoyl chloride

2-Nitrobenzoyl chloride

2-Nitrobenzoyl chloride structure

2-Nitrobenzoyl chloride 

structure
  • CAS No:

    610-14-0

  • Formula:

    C7H4ClNO3

  • Chemical Name:

    2-Nitrobenzoyl chloride

  • Synonyms:

    Benzoyl chloride,2-nitro-;Benzoyl chloride,o-nitro-;2-Nitrobenzoyl chloride;o-Nitrobenzoyl chloride;o-Nitrobenzoic acid chloride

  • Categories:

    Chemical Reagents  >  Organic Reagents

Description

CLEAR DARK BROWN LIQUID


O-nitrobenzoyl chloride is a crystalline solid. It is shock sensitive.


O-nitrobenzoyl chloride is a crystalline solid. It is shock sensitive.

2-Nitrobenzoyl chloride Basic Attributes

185.56

185.56

210-206-4

86W2G0JA5Q

1759

DTXSID4025741

2916399090

Characteristics

62.9

1.71

Clear yellow to orange to dark brown Liquid After Melting

1.5±0.1 g/cm3

24-25 °C

112 °C @ Press: 1 Torr

>230 °F

1.589

less than 1 mg/mL at 66° F (NTP, 1992)

0-6°C

Flammable; emit toxic hydrogen chloride gas in water

Insoluble in water. Decomposes in water.

Nitro, Nitroso, Nitrate, and Nitrite Compounds, Organic

Explosive

O-NITROBENZOYL CHLORIDE is incompatible with bases (including amines), with strong oxidizing agents, and with alcohols. May react with reducing agents. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].

Safety Information

III

8

UN 3261 8/PG 2

3

5-34

26-36/37/39-45-7/9-38

DM6650000

C

The warehouse is ventilated, low temperature and dry; stored separately from oxidants and alkalis

Explosive in heat

P280-P305 + P351 + P338-P310

H314

Flash point data is not available for this chemical, but it is probably combustible. (NTP, 1992)

|Danger|H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 40 companies from 1 notifications to the ECHA C&L Inventory.

Fires involving this compound can be controlled using dry chemical, carbon dioxide, or Halon extinquishers. (NTP, 1992)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, you should dampen the solid spill material with alcohol, then transfer the dampened material to a suitable container. Use absorbent paper dampened with alcohol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminate area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: This chemical is an irritant to skin, eyes and tissues. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)

2-Nitrobenzoyl chloride Use and Manufacturing

Benzoyl chloride, 2-nitro-: ACTIVE

Computed Properties

Molecular Weight:185.56
XLogP3:2.4
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:1
Exact Mass:184.9879707
Monoisotopic Mass:184.9879707
Topological Polar Surface Area:62.9
Heavy Atom Count:12
Complexity:201
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 2-Nitrobenzoyl chloride

Latest News on 2-Nitrobenzoyl chloride

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.