Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Dimethylaminoethyl acrylate

Dimethylaminoethyl acrylate

Dimethylaminoethyl acrylate structure

Dimethylaminoethyl acrylate 

structure
  • CAS No:

    2439-35-2

  • Formula:

    C7H13NO2

  • Chemical Name:

    Dimethylaminoethyl acrylate

  • Synonyms:

    2-Propenoic acid,2-(dimethylamino)ethyl ester;Acrylic acid,2-(dimethylamino)ethyl ester;Dimethylaminoethyl acrylate;2-(Dimethylamino)ethyl acrylate;N,N-Dimethylaminoethyl acrylate;DMAEA;NSC 20952;Acryloyloxyethyldimethylamine;[2-(Acryloyloxy)ethyl]dimethylamine;Norsocryl ADAME;ADAME;Aron DA;2-(Dimethylamino)ethyl prop-2-enoate;202667-60-5;254887-68-8

  • Categories:

    Water Treatment Chemical  >  Flocculant

Description

2-DIMETHYLAMINOETHYL ACRYLATE is a colorless to light yellow liquid with an acrid odor. Insoluble in water and floats on water. Irritates the eyes and produces tears.


2-dimethylaminoethyl acrylate appears as a colorless to light yellow liquid with an acrid odor. Insoluble in water and floats on water. Irritates the eyes and produces tears.|Liquid


2-dimethylaminoethyl acrylate appears as a colorless to light yellow liquid with an acrid odor. Insoluble in water and floats on water. Irritates the eyes and produces tears.

Dimethylaminoethyl acrylate Basic Attributes

143.18

143.18

1099119

219-460-0

5YES121FTL

20952

3302

DTXSID5025100|DTXSID3094464

2922199090

Characteristics

29.5

0.5

2-dimethylaminoethyl acrylate appears as a colorless to light yellow liquid with an acrid odor. Insoluble in water and floats on water. Irritates the eyes and produces tears.

1.0±0.1 g/cm3

-60°C

59.5-61.5 °C @ Press: 11 Torr

138 °F

1.442

soluble in water (1.000 g/L at 20°C).

2-8°C

0.35 psi ( 20 °C)

Highly flammable. Insoluble in water. It hydrolyzes slowly in water to produce acrylic acid and dimethylaminoethanol.

Amines, Phosphines, and Pyridines

Highly Flammable

Lachrymater. an acrylate ester so is prone to polymerization reactions. The reactive groups, in this substance, are the amine and ester and their possible reactivity concerns are listed below: Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Safety Information

6.1

UN 3302 6.1/PG 2

2

24/25-26-34-50-43-21/22

26-28-36/37/39-45-61

AS8578000

T+,N

P260-P273-P280-P284-P305 + P351 + P338-P310

H226-H302-H311-H314-H317-H330-H400

This chemical is flammable. (NTP, 1992)

|Danger|H226 (82.24%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P272, P273, P280, P284, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P333+P313, P361, P363, P370+P378, P391, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 158 companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H227: Combustible liquid [Warning Flammable liquids]|P201, P202, P210, P260, P261, P264, P270, P271, P272, P280, P281, P284, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P307+P311, P308+P313, P310, P312, P314, P320, P321, P322, P330, P333+P313, P361, P363, P370+P378, P403+P233, P403+P235, P405, and P501|H302: Harmful if swallowed [Warning Acute toxicity, oral]|P201, P202, P260, P261, P264, P270, P271, P272, P280, P281, P284, P301+P310, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P307+P311, P308+P313, P310, P312, P320, P321, P322, P330, P331, P333+P313, P361, P363, P403+P233, P405, and P501

Fires involving the compound should be controlled with a dry chemical, carbon dioxide or halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: When working with this chemical, wear a NIOSH-approved full face chemical cartridge respirator equipped with the appropriate organic vapor cartridges. If that is not available, a half face respirator similarly equipped plus airtight goggles can be substituted. However, please note that half face respirators provide a substantially lower level of protection than do full face respirators. (NTP, 1992)

Drug Information

Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]: Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)

Dimethylaminoethyl acrylate Use and Manufacturing

Uses

Solids separation agents

All other basic organic chemical manufacturing|2-Propenoic acid, 2-(dimethylamino)ethyl ester: ACTIVE|2-Propenoic acid, 2-(dimethylamino)ethyl ester, homopolymer: INACTIVE|XU - indicates a substance exempt from reporting under the Chemical Data Reporting Rule, (40 CFR 711).

Computed Properties

Molecular Weight:143.18
XLogP3:0.5
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:5
Exact Mass:143.094628657
Monoisotopic Mass:143.094628657
Topological Polar Surface Area:29.5
Heavy Atom Count:10
Complexity:121
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Dimethylaminoethyl acrylate

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.