3-Fluorotoluene
-
3-Fluorotoluene
structure -
-
CAS No:
352-70-5
-
Formula:
C7H7F
-
Chemical Name:
3-Fluorotoluene
-
Synonyms:
Benzene,1-fluoro-3-methyl-;Toluene,m-fluoro-;1-Fluoro-3-methylbenzene;m-Fluorotoluene;3-Fluorotoluene;NSC 8860
- Categories:
-
CAS No:
Description
clear colorless to light yellow liquid
3-fluorotoluene appears as a colorless liquid with an aromatic odor. Boiling point 239°C. Flash point 63°F. Density 0.991 g / cm3 --- may float or sink in water. (USCG, 1999)
3-fluorotoluene appears as a colorless liquid with an aromatic odor. Boiling point 239°C. Flash point 63°F. Density 0.991 g / cm3 --- may float or sink in water. (USCG, 1999)
3-Fluorotoluene Basic Attributes
110.13
110.13
1903631
206-524-8
F72W445DQ0
8860
2388
DTXSID2059855
29036990
Characteristics
0
2.73
3-fluorotoluene appears as a colorless liquid with an aromatic odor. Boiling point 239°C. Flash point 63°F. Density 0.991 g / cm3 --- may float or sink in water. (USCG, 1999)
0.9972 g/cm3 @ Temp: 13.4 °C
-87 °C
115 °C
49 °F
1.477
H2O: immiscible
Store below +30°C.
42.39 mm Hg (USCG, 1999)
Highly flammable.
Aryl Halides
Highly Flammable
3-FLUOROTOLUENE may be incompatible with strong oxidizing and reducing agents. Also may be incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides. Generates toxic fluoride fumes when burned.
Safety Information
II
3
UN 2388 3/PG 2
2
11-36/37/38
16-26-36-37/39
XT2578000
F,Xi
Flammable/Irritant
P210-P261-P305 + P351 + P338
H225-H315-H319-H335
Special Hazards of Combustion Products: May contain toxic fluoride fumes. Behavior in Fire: May produce toxic and irritating fluoride fumes. (USCG, 1999)
Fire Extinguishing Agents: Small fires: dry chemical, CO 2 , water spray or foam; large fires: water spray, fog or foam. (USCG, 1999)
Excerpt from ERG Guide 130 [Flammable Liquids (Water-Immiscible / Noxious)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 130 [Flammable Liquids (Water-Immiscible / Noxious)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)
Wear self-contained positive pressure breathing apparatus and full protective clothing. (USCG, 1999)
Drug Information
Inhalation causes upper respiratory irritation. Irritating to skin and eyes. May be absorbed through the skin. Prolonged exposure may result in systemic toxic effects. Harmful if swallowed. (USCG, 1999)
INHALATION: Move to fresh air. If not breathing, give artificial respiration. if breathing is difficult, give oxygen. EYES OR SKIN: Flush with running water for at least 15 min.; hold eyelids open if necessary. Remove and isolate contaminated clothing and shoes at the site. INGESTION: If victim is conscious, have victim drink water or milk. DO NOT INDUCE VOMITING. If victim is UNCONSCIOUS OR HAVING CONVULSIONS, do nothing except keep victim warm. (USCG, 1999)
3-Fluorotoluene Use and Manufacturing
Using m-nitrotoluene as raw material, m-aminotoluene is obtained by reduction, and then obtained by diazotization and pyrolysis.
Used as medicine and pesticide intermediate
Benzene, 1-fluoro-3-methyl-: ACTIVE
Computed Properties
Molecular Weight:110.13
XLogP3:2.7
Hydrogen Bond Acceptor Count:1
Exact Mass:110.053178385
Monoisotopic Mass:110.053178385
Heavy Atom Count:8
Complexity:70.8
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 3-Fluorotoluene
-
CN
8 YRS
Business licensedTrader Supplier of Food additives,Pharmaceutical raw materials,Chemicals,Comestic raw materials -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamine -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals
Learn More Other Chemicals
-
4-(Trifluoromethyl)benzeneacetic acid
32857-62-8
-
3-BROMO-2-FLUORO-6-PICOLINE
375368-78-8
-
2,4-Diisopropylphenol
2934-05-6
-
1,2-Diiodotetrafluoroethane Formula
354-65-4
-
6-METHYL-2-PIPERIDINECARBOXYLICACID Formula
99571-58-1
-
2,4-Dichloro-6-picoline Formula
42779-56-6
-
1-BROMO-1H,1H,2H,2H-PERFLUORODECANE Structure
21652-57-3
-
Perfluorohexanoic acid Structure
307-24-4
-
What is 6-chloro-2-naphthalenethiol
392330-26-6
-
What is 2,3-Dichloro-5-nitropyridine
22353-40-8