Allene
-
Allene
structure -
-
CAS No:
463-49-0
-
Formula:
C3H4
-
Chemical Name:
Allene
-
Synonyms:
1,2-Propadiene;Propadiene;Allene;sym-Allylene;Dimethylenemethane;Bis(methylene)methane;6688-91-1
-
CAS No:
Description
Allene is colorless with a sweet odor. It is a flammable gas and may cause fl ash fi re at room temperature. Allene is the simplest member of the 1,2-diene class of compounds of hydrocarbons of the aliphatic chemical family. It is a benzene and petroleum ether. Allenes are not as stable as conjugated dienes or isolated dienes. Allene is slightly more strained than the isomeric methylactylene. Allene is chiefl y used in organic synthesis. It is incompatible with metals and oxidizing materials, t
Propadiene is the organic compound with the formula H2C=C=CH2. It is the simplest allene or compound with two adjacent C=C double bonds, and can also be identified as allene. As a constituent of MAPP gas, it has been used as a fuel for specialized welding.
Propadiene, stabilized appears as a colorless flammable gas. May become unstable. Not toxic but asphyxiation may occur because of displacement of oxygen. Under prolonged exposure to fire or heat the containers may rupture violently and rocket.|Liquid
Propadiene, stabilized appears as a colorless flammable gas. May become unstable. Not toxic but asphyxiation may occur because of displacement of oxygen. Under prolonged exposure to fire or heat the containers may rupture violently and rocket.|Allene is a member of allenes.
Allene Basic Attributes
40.06
40.06
207-335-3
4AV0LZ8QKB
2200
DTXSID1029178
GAS|COLORLESS
2901299090
Characteristics
0
0.95730
Propadiene, stabilized appears as a colorless flammable gas. May become unstable. Not toxic but asphyxiation may occur because of displacement of oxygen. Under prolonged exposure to fire or heat the containers may rupture violently and rocket.
1.787 g/cm3
-136 °C
-34.5 °C @ Press: 760 Torr
1.339
INSOL IN WATER; SOL IN BENZENE, PETROLEUM ETHER
2-8°C
6795 mm Hg ( 21 °C)
1.42 (20 °C, vs air)
13%
9.84e-12 cm3/molecule*sec
CAN BE READILY LIQUIFIED
Highly flammable.
Conjugated Dienes
Highly Flammable
The unsaturated aliphatic hydrocarbons, such as PROPADIENE, are generally much more reactive than the alkanes. Strong oxidizers may react vigorously with them. Reducing agents can react exothermically to release gaseous hydrogen. In the presence of various catalysts (such as acids) or initiators, compounds in this class can undergo very exothermic addition polymerization reactions. Many of these compounds undergo autoxidation upon exposure to the air to form explosive peroxides. Violent explosions have occurred at low temperatures in ammonia synthesis gas units. These explosions have been traced to the addition products of dienes and oxides of nitrogen, produced from the interaction of nitrogen oxide and oxygen [Bretherick, 1995].
Safety Information
2.1
UN 2200 2.1
3
12
9-16-33
F+,F
Flammable
UNSTABLE
P210, P377, P381, P403, P41, P403
H220
UN 2200 2
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: EXTREMELY FLAMMABLE. Will be easily ignited by heat, sparks or flames. Will form explosive mixtures with air. Silane (UN2203) will ignite spontaneously in air. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Vapors from liquefied gas are initially heavier than air and spread along ground. Vapors may travel to source of ignition and flash back. Cylinders exposed to fire may vent and release flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket. (ERG, 2016)|Flammable - 4th degree, Reactive - 3rd degree
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: DO NOT EXTINGUISH A LEAKING GAS FIRE UNLESS LEAK CAN BE STOPPED. SMALL FIRE: Dry chemical or CO2. LARGE FIRE: Water spray or fog. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Do not direct water at source of leak or safety devices; icing may occur. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: As an immediate precautionary measure, isolate spill or leak area for at least 100 meters (330 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 800 meters (1/2 mile). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 1600 meters (1 mile) in all directions; also, consider initial evacuation for 1600 meters (1 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Stop leak if you can do it without risk. Do not touch or walk through spilled material. Do not direct water at spill or source of leak. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. If possible, turn leaking containers so that gas escapes rather than liquid. Prevent entry into waterways, sewers, basements or confined areas. Isolate area until gas has dispersed. (ERG, 2016)
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)
FLAMMABLE; DANGEROUS FIRE RISK.
(SELF-REACTIVE): PURE ALLENE CAN DECOMP EXPLOSIVELY AT 2 ATMOSPHERES.
/GUIDE 116P: GASES - FLAMMABLE (UNSTABLE)/ Fire or Explosion: EXTREMELY FLAMMABLE. Will be easily ignited by heat, sparks or flames. Will form explosive mixtures with air. ... Those substances designated with a "P" may polymerize explosively when heated or involved in a fire. Vapors from liquefied gas are initially heavier than air and spread along ground. Vapors may travel to source of ignition and flash back. Cylinders exposed to fire may vent and release flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket. /Propadiene, inhibited; Propadiene, stabilized/|/GUIDE 116P: GASES - FLAMMABLE (UNSTABLE)/ Health: Vapors may cause dizziness or asphyxiation without warning. Some may be toxic if inhaled at high concentrations. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating and/or toxic gases. /Propadiene, inhibited; Propadiene, stabilized/|/GUIDE 116P: GASES - FLAMMABLE (UNSTABLE)/ Public Safety: CALL Emergency Response Telephone Number ... . As an immediate precautionary measure, isolate spill or leak area for at least 100 meters (330 feet) in all directions. Keep unauthorized personnel away. Stay upwind. Many gases are heavier than air and will spread along ground and collect in low or confined areas (sewers, basements, tanks). Keep out of low areas. /Propadiene, inhibited; Propadiene, stabilized/|/GUIDE 116P: GASES - FLAMMABLE (UNSTABLE)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. /Propadiene, inhibited; Propadiene, stabilized/|For more DOT Emergency Guidelines (Complete) data for PROPADIENE (8 total), please visit the HSDB record page.
No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./|The International Air Transport Association (IATA) Dangerous Goods Regulations are published by the IATA Dangerous Goods Board pursuant to IATA Resolutions 618 and 619 and constitute a manual of industry carrier regulations to be followed by all IATA Member airlines when transporting hazardous materials.|The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article.
Drug Information
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: Vapors may cause dizziness or asphyxiation without warning. Some may be toxic if inhaled at high concentrations. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating and/or toxic gases. (ERG, 2016)
Excerpt from ERG Guide 116P [Gases - Flammable (Unstable)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with liquefied gas, thaw frosted parts with lukewarm water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. (ERG, 2016)
allene
Allene Use and Manufacturing
PYROLYSIS OF PROPYLENE, ISOBUTYLENE OR A NAPHTHA/GAS OIL MIXT FOLLOWED BY SEPN, EG, BY NAPHTHA ADSORPTION; DEHYDROHALOGENATION OF PROPYLENE DIBROMIDE WITH SODIUM HYDROXIDE FOLLOWEDBY SEPN; CRACKING OF T-BUTYL ALCOHOL WITH STEAM AS A DILUENT FOLLOWED BY SEPN|A) ACTION OF ZINC DUST ON 2,3-DICHLOROPROPENE; B) PYROLYSIS OF ISOBUTYLENE; C) ELECTROLYSIS OF POTASSIUM ITACONATE.
Organic intermediate.
Intermediates
(1977) MORE THAN 2.72X10+6 G-MIXT WITH PROPYNE|(1979) MORE THAN 2.72X10+6 G-MIXT WITH PROPYNE
All other basic organic chemical manufacturing|1,2-Propadiene: ACTIVE
ANALYTE: METHYL ACETYLENE-PROPADIENE MIXTURE, MATRIX: AIR, PROCEDURE: COLLECTION IN A GAS SAMPLING BAG, FLAME IONIZATION DETECTION, RANGE: 480-1990 PPM.
Fire Hazards -> Flammable - 4th degree, Reactive - 3rd degree
Analysis Methods
| Name | Column Shape | Active Phase(℃) | Retention index | Temperature Control | Method | Comments | Reference |
|---|---|---|---|---|---|---|---|
| Kovats' RI, non-polar column, isothermal | Capillary | CP Sil 5 CB | 329.5 | 20. | isothermal | 25. m/0.15 mm/2. μm, H2 | Do, L.Raulin, F.Gas chromatography of Titan's atmosphere. III. Analysis of low-molecular-weight hydrocarbons and nitriles with a CP-Sil-5 CB WCOT capillary columnJ. Chromatogr.1992, 591, 1-2, 297-301. |
| Kovats' RI, non-polar column, isothermal | Capillary | PoraPLOT Q | 311. | 100. | isothermal | 10. m/0.32 mm/10. μm, H2 | Do, L.Raulin, F.Gas chromatography of Titan's atmosphere. I. Analysis of low-molecular-weight hydrocarbons and nitriles with a PoraPLOT Q porous polymer coated open-tubular capillary columnJ. Chromatogr.1989, 481, 45-54. |
| Kovats' RI, non-polar column, isothermal | Capillary | PoraPLOT Q | 316. | 160. | isothermal | 10. m/0.32 mm/10. μm, H2 | Do, L.Raulin, F.Gas chromatography of Titan's atmosphere. I. Analysis of low-molecular-weight hydrocarbons and nitriles with a PoraPLOT Q porous polymer coated open-tubular capillary columnJ. Chromatogr.1989, 481, 45-54. |
| Kovats' RI, non-polar column, isothermal | Packed | Squalane | 317. | 27. | isothermal | He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | Hively, R.A.Hinton, R.E.Variation of the retention index with temperature on squalane substratesJ. Gas Chromatogr.1968, 6, 4, 203-217. |
| Kovats' RI, non-polar column, isothermal | Packed | Squalane | 318. | 49. | isothermal | He, Chromosorb P; Column length: 15. m; Column diameter: 0.25 mm | Hively, R.A.Hinton, R.E.Variation of the retention index with temperature on squalane substratesJ. Gas Chromatogr.1968, 6, 4, 203-217. |
Computed Properties
Molecular Weight:40.06
XLogP3:0.8
Exact Mass:40.0313001276
Monoisotopic Mass:40.0313001276
Heavy Atom Count:3
Complexity:15.5
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes