Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Disperse Red 60

Disperse Red 60

Disperse Red 60 structure

Disperse Red 60 

structure
  • CAS No:

    17418-58-5

  • Formula:

    C20H13NO4

  • Chemical Name:

    Disperse Red 60

  • Synonyms:

    9,10-Anthracenedione,1-amino-4-hydroxy-2-phenoxy-;C.I. Disperse Red 60;1-Amino-4-hydroxy-2-phenoxy-9,10-anthracenedione;1-Amino-4-hydroxy-2-phenoxyanthraquinone;1-Amino-2-phenoxy-4-hydroxyanthraquinone;Duranol Brilliant Red T 2B;Miketon Polyester Red FB;Serilene Brilliant Red 2BL;Samaron Pink FBL;Resolin Red FB;Foron Brilliant Red E 2BL;Resorin Red FBE;Resolin Red FBE;Disperse Red 60;Ostacet Brilliant Red E-LB;C.I. Disperse Red 83;Serilene Red 2BL;Resiren Red TB;Dispersol Red B 2B;Sumikaron Red E-FBL;Latyl Cerise N;Transetile Rubine P-FL;Disperse Polyester Pink 2S;Tersetile Rubine FL;Palanil Red BF;Hostatherm Pink FBL;Teraprint Red 3G;C.I. Disperse Red 71;PTR 63;Lurafix Red 430;Terasil Red FB;Navilene Red FB;Intrasil Brilliant Red 2B;MS Red G;Ostacet Red E-L 2B;Dianix Red FB-E 220;Dianix Red FB-E;Disperse Red 3B;Anthraquinone magenta;Disperse Red E 4B;C.I. Solvent Red 146;C.I. 60756;Kayaset Red B;Sumiplast Red FB;Solvent Red 146;Lumacron Red FB;Disperse Red B 2B;Disperse Red B 2B 200;Resiren Red T-FB;Intratherm Brilliant Red P 1314NT;Intrasil Brilliant Red 2B 200;Ostacet Red E-LB;Brilliant Red E 2BL;Rifalon Red E-FBL;Synten Red P-BFL;Foron Brilliant Red 2BL200;Disperse Red FB;Foron Brilliant Red E 2BL200;Plast Red 8375N;Disperse Red E 3B;Rifalon Red E-FBL 200;Zenix Red FB-E;Terasil Red FBN;Dianix Red E-FB;1-Amino-2-phenoxy-4-hydroxy-9,10-anthraquinone;Sumikaron Red E-RPD;12223-37-9;12236-09-8;12767-73-6;50814-32-9;51848-30-7;54077-11-1;54328-10-8;57769-69-4;70956-30-8;74092-46-9;87843-79-6;92229-60-2;110617-60-2;144856-43-9;234443-08-4;909409-36-5;1526909-88-5

  • Categories:

    Dyes and Pigments  >  Dye

Description

deep red powderFine deep-red powder with white specks.


Disperse red 60 is a fine deep-red powder with white specks. (NTP, 1992)|DryPowder


Disperse red 60 is a fine deep-red powder with white specks. (NTP, 1992)

Disperse Red 60 Basic Attributes

331.32152

331.32

241-442-6

T4431S01IG

DTXSID2025210

2922509090

Characteristics

89.6

4.12330

Disperse red 60 is a fine deep-red powder with white specks. (NTP, 1992)

1.438

185 °C

570.3±50.0 °C(Predicted)

298.7ºC

less than 1 mg/mL at 68° F (NTP, 1992)

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Flammable; burning produces toxic nitrogen oxide fumes

Insoluble in water.

Amines, Phosphines, and Pyridines

An amine. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.

Safety Information

R36;R37

Warehouse ventilated, low temperature and dry

Stable. Combustible. Incompatible with strong oxidizing agents.

P261, P264, P272, P273, P280, P302+P352, P305+P351+P338, P321, P333+P313, P337+P313, P363, P501

H317

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

|Warning|H317 (70.26%): May cause an allergic skin reaction [Warning Sensitization, Skin]|P261, P264, P272, P280, P302+P352, P305+P351+P338, P321, P333+P313, P337+P313, P363, and P501|Aggregated GHS information provided by 386 companies from 11 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]|P261, P272, P280, P302+P352, P321, P333+P313, P363, and P501|The GHS information provided by 1 company from 1 notification to the ECHA C&L Inventory.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

C.I. Disperse Red 60

Disperse Red 60 Use and Manufacturing

Methods of Manufacturing

Using 1-aminoanthraquinone and phenol as raw materials, firstly, 1-aminoanthraquinone is halogenated and hydrolyzed to obtain 1-amino-4-hydroxy-2-haloanthraquinone, which is finally condensed with phenol to obtain the product. After filtering and drying, the finished product is obtained.

Uses

Disperse Red 3B is the main dye used for dyeing polyester. It has a bright color, excellent light fastness, good level dyeing, and slightly poor sublimation fastness. It is often composed of three primary colors with disperse yellow RGFL and disperse blue 2BLN. It is suitable for high temperature and high pressure dyeing. It can be used for direct printing of polyester and nylon fabrics, and also for transfer printing. The performance of dyeing diacetate fiber and triacetate fiber is similar to that of polyester. The color of dyed nylon and acrylic is bluer, the dyeing speed is slow, and the levelness and depth of dyeing are medium.


Dyes


Fabric, textile, and leather products not covered elsewhere

Production

100,000 - 500,000 lb

Textiles, apparel, and leather manufacturing|9,10-Anthracenedione, 1-amino-4-hydroxy-2-phenoxy-: ACTIVE

Computed Properties

Molecular Weight:331.3
XLogP3:4.5
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:5
Rotatable Bond Count:2
Exact Mass:331.08445790
Monoisotopic Mass:331.08445790
Topological Polar Surface Area:89.6
Heavy Atom Count:25
Complexity:530
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Disperse Red 60

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.