Isobutylene triethoxy silane impregnating agent

Jian Bang isobutene triethoxy silane impregnant penetration ability, can penetrate into the deep water can make the concrete 3-4mm, concrete structure rate decreased by more than 90%, more than 90% can reduce the corrosion of chlorine ion. It can effectively handle the micro cracks under 0.2mm, which will not produce bubbling, peeling, and does not change the original appearance of concrete. Excellent alkali resistance and durability, the protection life of 10-15 years. Isobutene triethoxysilane Jian Bang isobutene triethoxy silane impregnant by active ingredient composition is greater than 98.8%.

3-4mm deep into the concrete

Water absorption of concrete structure decreased by more than 90%

Reduce chlorine ion corrosion over 90%

Treatment of microcracks below 0.2mm

Protective life for 10-15 years

Active ingredient > 98.8%

Product parameters:

Appearance: colorless transparent liquid

The content of active ingredients: 98.9%

Density (25 degrees C): 0.88g/cm3

The content of hydrolyzable chloride: less than 100ppm

Flash point: 63 centigrade (closed cup)

Construction methods: spraying, roll coating, brush coating, large area construction proposal without gas spray

Drying time: table dry for 2-3 hours; completely cured: more than 7 days

Number of painting: 2 times

Recoating interval time: after the front table

Storage period: storage at 45 centigrade for 12 months.

Impregnation depth: 3-4mm

Packing specification: 175kg/ barrel

Application areas:

Jian Bang isobutene triethoxy silane impregnant is applicable to sea water corrosion, salt fog corrosion, corrosion and freezing deicing thawing damage of concrete structure protection, such as harbor wharf, bridge, bridge, water conservancy dam, city viaduct, highway bridge, railway bridge, tunnel, Airport Road, power and the nuclear power plant, sewage treatment plant.

Construction Description:

If there is no protective measures in the wind or rainy days, the construction will be avoided. If it rains in the course of the construction, it should be constructed, and there is no construction surface.

Shelter and other protection measures to prevent the surface dry area, no penetration immersion concrete structure silanecream material loss; if the loss is not up to the requirements for the construction to be repaired in order to ensure the quality of construction; if no surface sediment barrier or structural damage, which is repaired without the need for special working face processing.

(2) the airless spraying equipment should be used for spraying, and the experienced operators should be used when the airless spraying is used.

The amount of construction can be detected by wet film meter, and it can still be distinguished by naked eye within 1 hours after construction.

Whether silane was coated.

(4) use special cleaning agent to clean the tools such as spray gun, and the material packing should be retained, according to the supervision engineer.

It is required to check and properly deal with it.