Advanced elastic wall latex anticorrosive paint

Product composition:

Senior elastic exterior wall latex anticorrosive coating is made of elastic acrylic acid copolymer with ultraviolet radiation crosslinking curing effect is compound, made from high quality fillers and the variety of auxiliaries of environmentally friendly water-based paint.

Main features:

High elastic exterior wall emulsion coating anticorrosion coating has excellent durability, washing resistance, long-term in - 20 ℃ ~ + 40 ℃ temperature range of elasticity, to cover up the wall cracking, the coating has good protective and leakage resistance. Due to the cross-linking solidification on the surface of the coating, the coating can be stained, easy to clean, water permeable, acid rain and hot and humid, thus ensuring a durable clean and beautiful wall.

Product use:

Can be used as cement mortar, concrete, asbestos-cement board, such as base material surface, especially used for external walls have cracks (1.5 ㎜) or less maintenance and protection.

Instructions:

Surface treatment: in the clean and dry wall that has been coated with high permeability sealant, it can be directly coated with this coating, such as the surface of the wall is polluted again, need to remove pollution

Can be painted.

Front road matching: exclusive primer for advanced latex coatings.

Construction method: brush, roll, spray paint (also can be used with special tool to pull wool).

Coating number: three

Maintenance period: more than 14 days

Technical indicators:

Color: colorful: flat light weight: 1.24

Volume solid content: 42% (data of white or light-colored latex coating)

Theoretical spreading rate: 4.5 ㎡ / Kg (by 75 & mu; M dry coating, without loss.

Diluent: deionized water or water, with less than 2% water content (weight)

Film thickness: wet film: 178μ M, dry film: 75μ m

Elongation: more than 200%

Tensile strength: equal to 1.0Mpa

Dry time: (23 ± 2 ℃) 60 min

Coating interval: minimum 6 hours

Storage period:

After 6 months, after the test is qualified, use.

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Notes:

1. The coating in the storage should be stored in a cool, dry, from the sun of the warehouse, storage temperature 0 ~ 40 ℃.

2. The temperature is below 10 ℃, relative humidity is more than 85%, unfavorable construction.

3. The coating must be stirred well before painting, and the amount of diluent should be strictly controlled, such as excessive amount of addition, which can lead to the deterioration of the coating quality.

4. It is forbidden to mix oil or organic solvents during the use of paint.

5. Paint with the same batch number should be used in the same building.

6. Transportation can be handled according to non-hazardous materials.