Acrylic waterproof paint

Product composition:

Acrylic waterproof coating is made from pure acrylic copolymer emulsion, high quality face packing and various additives.

Product features:

Acrylic waterproof coating has excellent alkali resistance, water resistance, washing resistance and anti - contamination, strong adhesion, easy construction, non - toxic, safe.

Product use:

Acrylic waterproof coating can be used for the surface of cement mortar, concrete, cement asbestos board and ceiling, mainly for the protection and decoration of industrial plant or civil external wall building.

Instructions:

Surface treatment: clean and dry metope with special sealing primer for advanced building latex coating, can be painted acrylic waterproof coating directly; If metope is polluted again, need to clear the pollution rear can be coated.

Front road matching: a special sealing primer for advanced building latex coatings.

Construction method: brush, roll, scrape or spray. If air spray is adopted, nozzle diameter: 2~ 3mm, air pressure 0.3~ 0.6mpa.

Coating number: 2.

Maintenance period: more than 7 days.

Film thickness: dry film 33 mu m, wet film 90 mu m

Coating interval: minimum 3 hours

Technical indicators:

Lustre: flat light

Color: colors

Specific gravity: 1.5

Flash: no

Drying time: 50 minutes (23 + 2 ℃)

Volume solid content: 37 percent (data of white or light-colored latex paint)

Theory spreading rate: 7.5 ㎡ / Kg (33 mu m dry coating, excluding loss)

Storage method:

Storage period: 6 months. After that, it should be checked and used.

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Notes:

1. The coating in the storage should be stored in a cool, dry, from the sun of the warehouse, storage temperature 0 ~ 40 ℃.

2. The temperature is below 10 ℃, relative humidity is more than 85%, unfavorable construction.

3. The coating must be stirred well before painting, and the amount of diluent should be strictly controlled, such as excessive amount of addition, which can lead to the deterioration of the coating quality.

4. It is forbidden to mix oil or organic solvents during the use of paint.

5. Use the same batch of paint for the same building.

6. Transportation can be handled according to non-hazardous materials.