Oil pipeline special anticorrosive paint

Product composition:

Oil pipeline special anticorrosive coating is a fast drying single group of anti-rust coating made up of modified acrylic resin and special high quality anti-corrosion packing and organic solvents.

Product features:

The special anticorrosive coatings for oil pipeline have the characteristics of solid, fast drying and anti-collision. Strong rust resistance, good heat resistance and heat resistance, can withstand the effects of wind, sun, rain and other environmental changes; Able to adapt to the shipping, humid areas and has good resistance to wet degeneration and suitable for good adhesion at low temperature in winter and cold desert region, suitable for in - 30 ~ 60 ℃ environment; The finished product has a bright, non-flowing, no air bubble, small smell, easy construction, and environmental protection requirements.

Product use:

The special anticorrosive coating for oil pipeline is suitable for long-term storage and rust prevention of oil pipe, oil tank and drill pipe.

Instructions:

Coating method: high pressure airless spray, hand brush, roller coating

Coating intervals: 23 + 2 ℃, minimum 24 hours

Technical indicators:

Appearance: black, with light.

Density: about 1.15

Flash: 20 ℃

Thinner: special diluent

Group: single unit

Shelf life: 23 + 2 ℃ : for a long time

Theory of usage: 200 g / ㎡

Film thickness: wet film 90 micron

Maturation period: 25 ℃, stir well to construction

Drying time: 23 + 2 ℃, table 5 hours or less, work 12 hours or less

Packing specifications:

18 kg drum 20 l

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 12 months. After that, it should be checked and used.

Notes:

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.