Sodium Tripolyphosphate Tech grade

Material Safety Data Sheet

Section 1 - Chemical Product

MSDS Name:  Sodium Tripolyphosphate

Synonym:   Sodium Triphosphate; Sodium Tripolyphosphate

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

Hazard Symbols: XI
Risk Phrases: 36/37/38

____________________________________________________________________________________________

Section 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.

____________________________________________________________________________________________

Section 4 - FIRST AID MEASURES

Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

____________________________________________________________________________________________

Section 5 - FIRE FIGHTING MEASURES

General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

____________________________________________________________________________________________

Section 6 - ACCIDENTAL RELEASE MEASURES

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

____________________________________________________________________________________________

Section 7 – HANDLING AND STORAGE

Handling:
Wash thoroughly after handling. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

____________________________________________________________________________________________

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION

Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7758-29-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

____________________________________________________________________________________________

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: odorless
pH: 9.7-9.8 @ 1% soln.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not applicable.
Freezing/Melting Point: 1152F decomposes.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 1152 deg F
Solubility in water: 20% @ 25C
Specific Gravity/Density: >1.5
Molecular Formula: Na5P3O10
Molecular Weight: 367.8644

____________________________________________________________________________________________

Section 10 - STABILITY AND REACTIVITY

Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, exposure to air, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Oxides of phosphorus, irritating and toxic fumes and gases, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.

____________________________________________________________________________________________

Section 11 - TOXICOLOGICAL INFORMATION

RTECS#:
CAS# 7758-29-4: YK4570000 LD50/LC50:
CAS# 7758-29-4: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 3100 mg/kg; Oral, rat: LD50 = 3120 mg/kg; Skin, rabbit: LD50 = >4640 mg/kg.
Carcinogenicity:
Pentasodium Triphosphate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information

____________________________________________________________________________________________

Section 12 - ECOLOGICAL INFORMATION

Other No information available.

____________________________________________________________________________________________

Section 13 - DISPOSAL CONSIDERATIONS

Dispose of in a manner consistent with federal, state, and local regulations

____________________________________________________________________________________________

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
USA RQ: CAS# 7758-29-4: 5000 lb final RQ (Listed under Sodium phosphate, tribasi

____________________________________________________________________________________________

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7758-29-4: 1
Canada
CAS# 7758-29-4 is listed on Canada's DSL List.
CAS# 7758-29-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7758-29-4 is listed on the TSCA inventory.

____________________________________________________________________________________________

Section 16 -OTHER INFORMATION

Further information

Changes since the last version will be highlighted in the margin. This version replaces all previous versions.

The data presented here correpond to the present state of our knowledge and experience and are intended to describe our product with respect to possible safety demands. We imply with this however no guarantee of properties or description of qualities.