4-Chlorobenzotrichloride
-
4-Chlorobenzotrichloride
structure -
-
CAS No:
5216-25-1
-
Formula:
C7H4Cl4
-
Chemical Name:
4-Chlorobenzotrichloride
-
Synonyms:
Benzene,1-chloro-4-(trichloromethyl)-;Toluene,p,α,α,α-tetrachloro-;1-Chloro-4-(trichloromethyl)benzene;p-Chlorobenzotrichloride;p-Chlorophenyltrichloromethane;4-Chlorobenzotrichloride;4,α,α,α-Tetrachlorotoluene;p,α,α,α-Tetrachlorotoluene;α,α,α,4-Tetrachlorotoluene;p-(Trichloromethyl)chlorobenzene;α,α,α,p-Tetrachlorotoluene;α,α,α-Trichloro-4-chlorotoluene;p-Chloro-α,α,α-trichlorotoluene
- Categories:
-
CAS No:
Description
p-Chlorobenzotrichloride, an organochloride, is a flammable, water-white liquid.
Alpha, alpha, alpha, para-tetrachlorotoluene is a clear colorless liquid.
Alpha, alpha, alpha, para-tetrachlorotoluene is a clear colorless liquid.
4-Chlorobenzotrichloride Basic Attributes
229.92
229.92
1866549
226-009-1
1UP9GJU33S
1760
DTXSID2027593
2903999090
Characteristics
0
3.94
Alpha, alpha, alpha, para-tetrachlorotoluene is a clear colorless liquid.
1.5±0.1 g/cm3
5.8 °C
245 °C
>230 °F
1.571
Decomposes in water
Keep container closed when not in use. Corrosives area. Store protected from moisture.
LD50 orl-rat: 820 mg/kg EPASR* 8EHQ-0281-0360
Insoluble in water.
Halogenated Organic Compounds
Simple aromatic halogenated organic compounds, such as ALPHA, ALPHA, ALPHA, PARA-TETRACHLOROTOLUENE, are very unreactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Materials in this group may be incompatible with strong oxidizing and reducing agents. Also, they may be incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.
Safety Information
II
8
UN 1760 8/PG 2
3
45-21/22-37/38-48/23-62
53-45
XT8580000
T
Stable. Combustible. Incompatible with strong oxidizing agents.
P201, P202, P260, P261, P264, P270, P271, P272, P280, P281, P301+P312, P302+P352, P304+P312, P304+P340, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P362, P363, P403+P233, P405, P501
H302
Flash point data for this compound are not available, however, it is probably combustible. (NTP, 1992)
|Danger|H302: Harmful if swallowed [Warning Acute toxicity, oral]|P201, P202, P260, P261, P264, P270, P271, P280, P281, P301+P312, P302+P352, P304+P340, P308+P313, P312, P314, P321, P322, P330, P332+P313, P362, P363, P403+P233, P405, and P501|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P201, P202, P260, P261, P264, P270, P271, P272, P273, P280, P281, P301+P312, P302+P352, P304+P340, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P362, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 82 companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|P201, P202, P260, P261, P264, P270, P271, P272, P280, P281, P301+P312, P302+P352, P304+P312, P304+P340, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P362, P363, P403+P233, P405, and P501|P260, P264, P270, P280, P301+P312, P302+P352, P305+P351+P338, P312, P314, P321, P322, P330, P332+P313, P337+P313, P362, P363, and P501
To extinguish a fire involving this chemical you may use a dry chemical, carbon dioxide, foam or halon extinguisher; a water spray may also be used. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: When working with this chemical, wear a NIOSH-approved full face chemical cartridge respirator equipped with the appropriate organic vapor cartridges. If that is not available, a half face respirator similarly equipped plus airtight goggles can be substituted. However, please note that half face respirators provide a substantially lower level of protection than do full face respirators. RECOMMENDED GLOVE MATERIALS: Permeation data indicate that butyl rubber gloves may provide protection to contact with this compound. Butyl rubber over latex gloves is recommended. However, if this chemical makes direct contact with your gloves, or if a tear, hole or puncture develops, remove them at once. (NTP, 1992)
Drug Information
ACUTE/CHRONIC HAZARDS: Corrosive; Lachrymator. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)
AAATCT
4-Chlorobenzotrichloride Use and Manufacturing
The preparation method is to add p-chlorotoluene to the photochlorination reactor, turn on the chilled brine or cooling water of the condenser, heat up and turn on the ultraviolet lamp, pass in chlorine to start the chlorination reaction, control a certain reaction temperature, and stop when the reaction reaches the end Chlorine gas is used to remove chlorine and hydrogen chloride from chlorinated materials, and the finished product is distilled under reduced pressure.
Used as pharmaceutical intermediate
Benzene, 1-chloro-4-(trichloromethyl)-: ACTIVE
Computed Properties
Molecular Weight:229.9
XLogP3:4.6
Exact Mass:229.903761
Monoisotopic Mass:227.906711
Heavy Atom Count:11
Complexity:121
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 4-Chlorobenzotrichloride
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
2 YRS
Business licensedTrader Supplier of Dimethyl sufoxideInquiryUnit Price: $21-22 /MT FOBCAS No.: 5216-25-1Grade: Industrial GradeContent: 99.5% -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 5216-25-1Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
1-phenyl-3-(1H-1,2,4-triazol-5-yl)urea
55424-82-3
-
Bromopyruvic acid
1113-59-3
-
2-Amino-5-chlorophenol
28443-50-7
-
N-[2-(2,4,6-Trichlorophenoxy)ethyl]-1-propanamine Formula
67747-01-7
-
2-(4-chlorophenyl)-2-methylpropanol Formula
80854-14-4
-
1,6-Hexanediol Formula
629-11-8
-
4-Morpholinamine Structure
4319-49-7
-
S-Octyl carbonochloridothioate Structure
13889-96-8
-
What is 2-(2-Bromoethoxy)-1,3,5-trichlorobenzene
26378-23-4
-
What is 2,4′-Difluorobenzophenone
342-25-6