Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 1,2,3,6-Tetrahydropyridine

1,2,3,6-Tetrahydropyridine

1,2,3,6-Tetrahydropyridine structure

1,2,3,6-Tetrahydropyridine 

structure
  • CAS No:

    694-05-3

  • Formula:

    C5H9N

  • Chemical Name:

    1,2,3,6-Tetrahydropyridine

  • Synonyms:

    Pyridine,1,2,3,6-tetrahydro-;1,2,3,6-Tetrahydropyridine;1,2,5,6-Tetrahydropyridine;Δ3-Piperidine;NSC 65443;3,6-Dihydro-2H-pyridine

  • Categories:

    Pharmaceutical Intermediates  >  Heterocyclic Compound

Description

Clear colorless to pale yellow liquid


1,2,3,6-tetrahydropyridine appears as a colorless liquid. Insoluble in water. Floats on water. Vapors heavier than air. Used to make other chemicals.


1,2,3,6-tetrahydropyridine appears as a colorless liquid. Insoluble in water. Floats on water. Vapors heavier than air. Used to make other chemicals.|3-piperideine is a piperideine.

1,2,3,6-Tetrahydropyridine Basic Attributes

83.13

83.13

211-766-2

26RLS9D255

65443

2410

DTXSID0075289

29333999

Characteristics

12

1.05

White to pale yellow-cream Powder

0.9153 g/cm3 @ Temp: 20 °C

-48 °C

108 °C

61 °F

n20/D 1.48(lit.)

Highly flammable. Insoluble in water.

Amines, Phosphines, and Pyridines

Highly Flammable

1,2,3,6-TETRAHYDROPYRIDINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Safety Information

II

3.1

UN 2410 3/PG 2

3

11-36/37/38

16-26-36/37/39

F,Xi

Irritant/Highly Flammable

P210-P261-P305 + P351 + P338

H225-H315-H319-H335

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 2nd degree

|Danger|H225 (97.5%): Highly Flammable liquid and vapor [Danger Flammable liquids]|P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 40 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. Do not use dry chemical extinguishers to control fires involving nitromethane (UN1261) or nitroethane (UN2842). LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

1,2,3,6-Tetrahydropyridine Use and Manufacturing

Uses

Organic intermediate.

Fire Hazards -> Flammable - 2nd degree

Computed Properties

Molecular Weight:83.13
XLogP3:0.5
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:1
Exact Mass:83.073499291
Monoisotopic Mass:83.073499291
Topological Polar Surface Area:12
Heavy Atom Count:6
Complexity:57
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 1,2,3,6-Tetrahydropyridine

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.