Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 1,4-Dichlorobutane

1,4-Dichlorobutane

1,4-Dichlorobutane structure

1,4-Dichlorobutane 

structure

Description

PHYSICAL DESCRIPTION: Colorless mobile liquid with a mild pleasant odor. (NTP, 1992)


1,4-dichlorobutane is a colorless mobile liquid with a mild pleasant odor. (NTP, 1992)


1,4-dichlorobutane is a colorless mobile liquid with a mild pleasant odor. (NTP, 1992)

1,4-Dichlorobutane Basic Attributes

127.01

127.01

635673

203-778-1

8326YNM2B3

6288

1993

DTXSID5021918

29031980

Characteristics

0

2.24

Clear Liquid

1.1598 g/cm3 @ Temp: 20 °C

-37.3 °C

161 °C

104 °F

1.429

H2O: 0.24 g/100 mL (20 ºC)

2-8°C

5 hPa

4.4 (NTP, 1992) (Relative to Air)

1.8-8.9%(V)

4.86e-04 atm-m3/mole

Highly flammable. Insoluble in water.

Halogenated Organic Compounds

Highly Flammable

Halogenated aliphatic compounds, such as 1,4-DICHLOROBUTANE, are moderately or very reactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Materials in this group may be incompatible with strong oxidizing and reducing agents. Also, they may be incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides. This compound can react vigorously with oxidizing materials. (NTP, 1992)

Safety Information

III

3

UN 1993 3/PG 3

1

10-36/37/38-39/23/24/25-23/24/25-11

26-36-45-36/37-16-7

Xi,T,F

Stable. Flammable. Incompatible with strong bases, strong oxidizing agents.

P261-P305 + P351 + P338

H226-H315-H319-H335

UN 1993

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. Substance may be transported hot. For hybrid vehicles, ERG Guide 147 (lithium ion batteries) or ERG Guide 138 (sodium batteries) should also be consulted. If molten aluminum is involved, refer to ERG Guide 169. (ERG, 2016)

|Warning|H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 103 companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

A fire in your laboratory involving this chemical should be extinguished with a dry chemical, carbon dioxide or halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. RECOMMENDED GLOVE MATERIALS: Permeation data indicate that butyl rubber gloves may provide protection to contact with this compound. Butyl rubber over latex gloves is recommended. However, if this chemical makes direct contact with your gloves, or if a tear, hole or puncture develops, remove them at once. (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: Irritant. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

1,4-dichlorobutane

1,4-Dichlorobutane Use and Manufacturing

Methods of Manufacturing

1. Derived from the reaction of chlorobutane and chlorine. 2. Derived from the reaction of tetrahydrofuran and hydrochloric acid.

Uses

Used in organic synthesis and pesticide manufacturing


Intermediates

All other basic organic chemical manufacturing|Butane, 1,4-dichloro-: ACTIVE

Computed Properties

Molecular Weight:127.01
XLogP3:2.1
Rotatable Bond Count:3
Exact Mass:126.0003056
Monoisotopic Mass:126.0003056
Heavy Atom Count:6
Complexity:17.5
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 1,4-Dichlorobutane

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.